Search results for: 'The Range'

SOR 4N3-KK4-N1-C1A-ZZ pressure switch delivers adjustable 2-25 PSI switching for industrial pressure control, with 750 PSI over range and 1000 PSI proof pressure for monitored process applications.

Johnson Controls P10BC-7C low pressure control, SPDT, 1-stage, 3 to 20 psi range, 12 psig factory setting, 2 psi switch differential, with barbed fitting.

Mitsubishi TH-T25KP thermal overload relay provides 3-element overload protection with a 1.7 A heater designation, 1.4–2 A setting range, and auxiliary NO/NC contacts for industrial motor control circuits.

The Axiomatic IC-DR-13 is an analog signal converter designed to accept a standard 4–20 mA input and produce a user-selectable bipolar current output. Output range is jumper-selectable from ±10 mA to ±310 mA in 10 mA steps. The module operates from a 24 VDC nominal supply and is housed in a DIN-rail mount enclosure for industrial applications.

Phoenix Contact QUINT-PS/1AC/24DC/10 DIN-rail power supply provides 24 V DC (adjustable 18–29.5 V) at 10 A from a wide-range 1-phase AC or DC input. Includes DC OK signaling, BOOST indication, and SFB technology support.

The MAC Valves PME-501CC is a solenoid pilot valve labeled 24 VDC and 6.0 watts. The valve body marking indicates a pressure range of 20–150 PSI. The unit includes an attached hardwired cable with flying leads.

Siemens 771-8STF1 current-to-pneumatic (I/P) transducer converts a DC mA input to a proportional pneumatic output. Configuration: 4–20 mA input, 3–27 psig output, standard output capacity, terminal strip, intrinsically safe approval.

ABB 1SVR427032R0000 switch mode power supply delivers 24 VDC output at 2.5 A from a 100–240 VAC input, with adjustable output voltage from 24–28 VDC and 60 W max load capacity for control and industrial power applications.

Square D 9065SS110 Motor Logic solid-state overload relay delivers adjustable 9-27A motor overload protection in a 600VAC Class 10 design sized for NEMA Size 1 control applications.

The Deltron ST150-1XX is a 150 W industrial AC-DC switching power supply with three DC outputs. It provides one 5 V output rated at 20 A and two 12 V outputs rated at 5 A each. Designed for terminal block wiring, it supports dual-range AC input and is used in control and automation systems.

The Siemens TA2J6500 is an aluminum body 2-barrel lug accessory for use with 2- or 3-pole 200A–400A JD and LD frame molded case circuit breakers. It supports copper conductors from 3/0 AWG to 500 kcmil and aluminum conductors from 4/0 AWG to 500 kcmil, and is suitable for both line and load side connections.

The Allen-Bradley 1606-XLE480EP is a 24V DC, 20A (480W) switched mode power supply from the 1606-XLE Essential series. It supports 100–240V AC input and 110–150V DC input, features adjustable 24–28V output, 20% power reserve, DC OK relay contact, and screw terminals for DIN rail industrial installation.

Phoenix Contact MINI-PS-12-24DC/5-15DC/2 converts 12–24 V DC input into adjustable 5–15 V DC output at up to 2 A, supporting regulated voltage conversion and electrical isolation in compact DC power systems.

Allen-Bradley 193-T1AB48 bimetallic overload relay delivers adjustable 3.5-4.8 A motor overload protection with Class 10 tripping, phase-loss sensitivity, and manual or automatic reset for motor starter assemblies.

Moore Industries TIY/PRG/4-20MA/12-42DC [DIN] is a programmable isolated thermocouple transmitter that accepts common thermocouple types and millivolt inputs and delivers a linear 4-20mA output with front-panel ranging, display indication, and self-diagnostics.

The ATC TDH-120-ALA-100 is a delayed interval time delay relay designed for industrial control applications. It operates on 120 VAC/DC supply voltage and provides an adjustable delay range from 1 to 100 seconds using dual front-mounted dials. The relay features a plug-in octal base and relay contacts rated at 10A.

The ABB 1SVR430841R0200 CM-SRS.11 provides TRMS current monitoring with adjustable thresholds and multiple ranges, ideal for single-phase industrial control protection.

Weidmuller PRO MAX 480W Power Supply: High-efficiency 24V, 20A power solution for demanding automation. Reliable performance in extreme conditions with long-lasting durability.

Kanson Electronics 1010-1-J-2 off-delay timer relay delivers adjustable 0.5 to 50.0 second timing with 115V 50/60Hz operation and 10 amp output switching for industrial control circuits.

Honeywell T775U 2006 Series 2000 electronic universal controller for heat or cool applications, with 1 universal input, 1 temperature sensor input, 2 SPDT relays, and configurable mod outputs.

Allen-Bradley 193-BSB30 thermal overload relay delivers adjustable 2.0–3.0 A motor protection with Class 10 operation, manual or auto reset selection, and direct-mount Bulletin 193 form factor control.

Hubbell 0740-113-36 Deluxe Cord Grip enables secure liquidtight cable entry for .500"–.625" insulated cables with corrosion-resistant stainless steel mesh and oil-resistant sealing.