Search results for: 'and isaiah'

The Schrack ZG400615 is a used ice cube relay rated for 5 Amps and up to 600 Volts. It features a 14-pin plug-in design and a 115 VAC coil voltage, making it suitable for general industrial control and electrical switching applications where reliable electromechanical control is required.

The T.A. Systems EL-9060 is a sonic relay board module designed for industrial control applications operating on 24VDC. It is used to translate low-power control signals into higher-power switching actions within industrial automation and machinery control systems.

The Leviton 001-85001 is a 1-gang toggle switch wallplate made from durable thermoset plastic. This standard-size wallplate is brown in color and designed for device mounting. It resists fading, discoloration, grease, oil, organic solvents, and moisture scratches, and includes mounting screws.

The FANUC A06B-6114-K213/E is an industrial connector plug used for encoder or brake connections on FANUC servo motors. Manufactured for CNC and automation systems, this connector is supplied as a right-angle style plug and is identified by the FANUC part number A06B-6114-K213/E.

The Phoenix Contact 560-3889 is a power distribution interface module used within Emerson Ovation distributed control systems. It functions as a marshalling and power distribution interface between controllers and I/O field devices, supporting structured wiring through screw terminal connections in PLC and DCS panels.

Johnson Controls P10BC-7C low pressure control, SPDT, 1-stage, 3 to 20 psi range, 12 psig factory setting, 2 psi switch differential, with barbed fitting.

The IDEC CS-10 ACSSO contact block is a cam switch component configured with one normally open contact and circuit designation C-2004. It is rated for 600 V insulation voltage and 10 A thermal current, utilizes silver contacts, and is designed for industrial control applications requiring reliable mechanical switching performance.

Allen-Bradley 193-BSB30 thermal overload relay delivers adjustable 2.0–3.0 A motor protection with Class 10 operation, manual or auto reset selection, and direct-mount Bulletin 193 form factor control.

The Allen-Bradley 800FM-MT44 is a metal emergency stop push button operator with a 40 mm red mushroom actuator and twist-to-release operation. Designed for 22.5 mm panel mounting, this non-illuminated operator is part of the Bulletin 800FM metal series for industrial control applications.

Introducing the OWON SPE3051 150W DC Power Supply: Precision and Portability in One

Siemens Furnas E62 thermal overload heater element delivers thermal overcurrent protection for use with thermal overload relays, magnetic motor starters, and motor control applications.

The Deltron ST150-1XX is a 150 W industrial AC-DC switching power supply with three DC outputs. It provides one 5 V output rated at 20 A and two 12 V outputs rated at 5 A each. Designed for terminal block wiring, it supports dual-range AC input and is used in control and automation systems.

The Square D 9065-AT-1L is a thermal overload relay designed for motor protection applications. This unit features a manual reset mechanism and copper line/load terminals, as shown. Identified by manufacturer labeling, it is part of the Square D Class 9065 series.

Superior Electric SS50 SLO-SYN AC synchronous motor delivers fixed-speed synchronous operation for motion control systems with 120 VAC input, 72 RPM output, and documented SLO-SYN holding torque characteristics.

The Leviton 020-86001 is a standard-size 1-gang toggle switch wallplate made from durable thermoset plastic with a smooth ivory finish. Designed for traditional toggle devices, it offers resistance to fading, discoloration, grease, oils, moisture, and scratches, and includes color-matched metal mounting screws.

The General Electric 8G163WF is a fluorescent lamp ballast labeled for 277-volt operation and F48CW lamp applications. This unit is identified directly from manufacturer carton labeling and is supplied as a single ballast. No additional accessories or documentation are included.

The Eaton P1-25/V/SVB is a 25 A, three-pole main switch from the Eaton Moeller® P1 series designed for rear mounting applications. It features a door-coupling rotary drive with a red rotary handle and yellow locking ring, and supports emergency switching off functionality. The switch is rated up to 690 V AC, provides IP65 front protection, and is lockable in the 0 (Off) position for secured isolation.

The Siemens Sentron ED43B020 is a 3-pole, 20 amp molded case circuit breaker rated for 480 VAC operation. It provides thermal-magnetic protection with long-time and instantaneous trip functions and is designed for use in commercial and industrial power distribution systems.

The General Electric CR305X100E is a side-mounted auxiliary contact adder block providing one normally closed (1 NC) contact for GE 200- and 300-Line starters and contactors. It is designed for field installation onto a basic auxiliary contact block and is rated up to 600 VAC and 250 VDC.

Helwig Carbon H704 high-speed turbine carbon brush is built for turbo generator service, delivering low-friction electrical contact, balanced current distribution, and dependable performance at peripheral speeds up to 180 mph.

The Fireye 4-314-1 is an ultraviolet sensing tube used in Fireye flame scanner assemblies. This tube is supplied as a standalone replacement component and is identified on the original manufacturer carton for use with select 45UV series scanners. No scanner body or accessories are included.

The Corcom NF21091-3 is a chassis-mount EMI line filter rated for 16 A at 250 VAC, 50/60 Hz. This metal-enclosed filter features clearly labeled LINE and LOAD terminals and is designed for installation in AC power input paths where conducted electrical noise reduction is required.

The SATO RH1731100 is a genuine SEN 5 Cable data transfer cable assembly used inside SATO industrial label printers. This internal electrical component includes an attached micro switch and is designed to connect internal printer mechanisms to the main circuitry in supported M84xxS and M84xxSe series printers.