Search results for: 'connected'

Marel MWS 4 Weight Control Module for industrial weighing systems, with CAN network labeling, dual RS232 ports, multiple sensor terminals, and four load cell connections in a compact panel-mount format.

Turck MK91-12-R/115VAC is a 1-channel level controller for electrode-based level monitoring with 115VAC supply, relay output switching, and adjustable operating settings for control tasks.

Phoenix Contact QUINT-DIODE/12-24DC/2X20/1X40 is a DIN-rail mounted redundancy diode module for 12–24 V DC systems. It decouples parallel power supplies to increase system availability, supporting 2×20 A redundancy or 1×40 A increasing power operation.

Siemens 5SY4108-7 delivers reliable 8A Type C circuit protection for DIN-rail systems, ideal for control and lighting circuits needing dependable overload and short-circuit performance.

Lithonia Lighting 563-252 delivers NEMA twist-lock photo control functionality for compatible TF, TFH, TFD, TFG, or TFL fixtures equipped with a PER receptacle.

Honeywell 620-0041 processor power supply module providing 115/230 VAC input and 8 A capacity for PLC system power distribution.

INA SRMC 3-A 300 cm signal lead cable supports SRM electronic measurement system connectivity with a rugged cable assembly for precise bearing measurement setups.

Siemens 5SY4110-7 SENTRON 10A MCB delivers reliable C-curve circuit protection for 230/400V systems, ideal for industrial, commercial, and control panel applications.

OMRON PTF11PC 11-pin relay socket lot with 10A rating and screw-terminal wiring layout, ready for relay socket replacement, panel support, or control component stocking.

R. STAHL INTRINSPAK 9001/02-093-030-10 safety barrier for industrial control and intrinsically safe interface applications, identified with 250V and 30 mA raw-data rating information.

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

Siemens POL906.00/MCQ Communication Module supports POL6xx-connected control architecture in a compact modular format, with visible LON-SCC identification plus on-product IP20, -40 to 70, 80 mA, and 0.4 W markings.

The EMI Corp Gimatic 6753 SB2C Sensor Junction Box enables connection of up to two sensors with series or parallel wiring, PNP/NPN signal conversion, dry contact I/O, signal regeneration, and LED status indication for efficient automation integration.

The Phoenix Contact 560-3889 is a power distribution interface module used within Emerson Ovation distributed control systems. It functions as a marshalling and power distribution interface between controllers and I/O field devices, supporting structured wiring through screw terminal connections in PLC and DCS panels.

Lake Shore RIMF2V1 frequency-to-voltage converter brings encoder signal conversion into a compact control module with selectable V/RPM and PPR settings, 0/4-20 mA output, ±10V output, ±300V output, and relay output.

ABB 1SVR427032R0000 switch mode power supply delivers 24 VDC output at 2.5 A from a 100–240 VAC input, with adjustable output voltage from 24–28 VDC and 60 W max load capacity for control and industrial power applications.

Square D 2510KG1 manual switch delivers reliable 30A control for single-phase systems with a 2-pole toggle design and non-reversing operation in a compact NEMA 1 enclosure.

The General Electric DS200DDTBG2ABB is an LCI Auxiliary I/O Terminal Board for GE Mark V Speedtronic gas and steam turbine control systems. It provides auxiliary signal termination, conditioning, and isolation for analog and digital I/O in high-voltage industrial control environments.

Black Box IC107A-R2 RS-232↔RS-422/485 converter for data-only serial communication. Supports 4-wire full-duplex operation for point-to-point or multipoint links. Provides a DB25 female RS-232 interface and a 4-pin terminal block for RS-422/485 with TX/RX/PWR LEDs.

KATKO KU 380N load break switch delivers 3-pole isolation and switching up to 80A at 690V AC-22, supporting reliable control and disconnection of electrical loads in industrial power systems.

Allen-Bradley 100-C16D*10 motor contactor built for switching motor loads in industrial control systems, featuring a 110-120V AC coil, 3-pole power contacts, and 1 NO auxiliary contact for control circuit integration.

Allen-Bradley 193-T1AB48 bimetallic overload relay delivers adjustable 3.5-4.8 A motor overload protection with Class 10 tripping, phase-loss sensitivity, and manual or automatic reset for motor starter assemblies.

Eaton WMZH3D16T provides reliable 16A D-curve UL 489 protection for high-inrush industrial circuits, offering secure DIN-rail installation and robust performance.