Search results for: 'cover tre'

Steel City RS 2 surface cover provides a durable, galvanized finish for mounting a toggle switch and duplex receptacle on 4" square boxes in exposed installations.

Killark 380S stamped steel conduit body cover designed for 1-inch trade size conduit bodies. Constructed from stamped steel with stainless steel screws, this UL and CSA approved blank cover is used to close and protect conduit body openings in electrical installations.

Steel City RSL 8 raised device cover provides a durable, galvanized 4-11/16" square solution for mounting two duplex receptacles in commercial installations.

Eaton AC222URNMP-A2 provides a durable 60A non-fusible AC disconnect for safe service shutdown of outdoor HVAC units, featuring a NEMA 3R UV-resistant enclosure.

Schneider Electric 9001KU7 is a clear silicone rubber push button boot for Harmony 9001K and 9001SK non-illuminated 30 mm push buttons.

Thomas & Betts Red Dot 2CCD weatherproof two-gang duplex receptacle cover delivers die-cast metallic protection for dual duplex outlets with gasketed sealing and device-mount installation.

The Fluke CV300 is a 75 mm ClirVu® infrared window with a hand turn door latch, designed to improve electrical inspection safety. It enables thermal inspections without opening energized panels and supports fast single-hole installation while maintaining enclosure ratings.

Leviton 4779-C delivers industrial-grade 15A, 277V NEMA L7-15R locking connectivity with grounding, screw termination, and rugged Black & White Series construction for dry electrical environments.

The HOFFMAN A24246GSC electrical enclosure delivers screw-cover, gasketed protection for wiring, junction, pull, and terminal box applications exposed to windblown dust and rain, with galvanized steel construction and IP66 performance.

Cantex 51337141 PVC Junction Box provides 12 x 12 x 4 molded rigid PVC protection for wires and terminals, with a gasketed cover for electrical device and fixture support.

Hubbell WP8M weatherproof 1-gang outlet box hood provides protective coverage for vertical electrical box installations with a hinged gray cover and gasketed weather-resistant design.

Leviton 165-4729-C delivers 15A, 125V NEMA L5-15R locking connectivity with industrial-grade grounding, brass contacts, nylon construction, and 18–10 AWG terminal accommodation.

The Potter & Brumfield KUP14D15 is an enclosed electromechanical control relay with a 12 VDC coil and a 3PDT (3 Form C) contact configuration. This relay features an 11-pin blade terminal base and a clear polycarbonate dust cover for component visibility.

The Leviton 010-80701 is a 1-gang black toggle wallplate constructed from molded thermoplastic nylon. Designed for standard wall box installations, it provides a durable, smooth-finish cover for single toggle switches in residential or commercial environments.

The Honeywell 3PA2 is a zinc limit switch enclosure designed for use with basic switches. It provides a durable gray chassis-style housing with screw mounting for industrial applications requiring an enclosed switch case. Intended to protect switch terminals and internal mechanisms.

The Allen-Bradley 700-HK32Z24 offers reliable DPDT switching in a slim 24V DC plug-in relay design, ideal for high-density control panels and industrial automation.

The Schrack ZG400615 is a used ice cube relay rated for 5 Amps and up to 600 Volts. It features a 14-pin plug-in design and a 115 VAC coil voltage, making it suitable for general industrial control and electrical switching applications where reliable electromechanical control is required.

The Mitsubishi CP30-BA 1-Pole 10A M-Curve Circuit Protector is a compact supplementary circuit breaker designed for protection of low-capacity control circuits, motors, and transformers. It supports AC 250 V and DC 65 V operation and mounts on a standard 35 mm DIN rail using screw terminals.

The Mitsubishi CP30-BA 1-Pole 7A M-Curve Circuit Protector is a compact hydraulic-magnetic circuit protector designed for supplementary protection of low-capacity industrial control circuits. It supports AC 250 V and DC 65 V operation and uses an M-curve trip characteristic suitable for moderate inrush loads.

ZORO Select model 6UEE7 is an electric sequencer designed for HVAC and refrigeration systems. It operates on 24V AC control voltage and features two switches with adjustable on and off timing. Rated for up to 25A resistive load, it supports horizontal or vertical installation.

Thomas & Betts MSC20 motor stub splice insulators provide insulated protection for compatible splice connectors up to 600 V and 90°C using modified neoprene construction for electrical connection insulation applications.

The Allen-Bradley 2198-K57CK-D15M is a universal feedback connector kit for Kinetix 5700 drives. It provides wire terminations for encoder signals when using Allen-Bradley 2090-Series motor feedback cables and connects to the drive’s universal feedback (UFB) port.

The Mitsubishi SR-T5 AC100V 3A2B contactor relay is designed for control circuits requiring reliable auxiliary switching. It operates on a 100–127 VAC coil and provides 3 normally open and 2 normally closed contacts. The compact design supports DIN rail or screw mounting.

Hubbell HBL26420 Hubbellock industrial receptacle rated 60A 600V AC, 3-pole 4-wire grounding, screw terminals, cast aluminum long housing.