Search results for: 'csa and no'

Allen-Bradley 1489-M1C100 miniature circuit breaker delivers 10 A, 1-pole thermal-magnetic branch circuit protection with a C trip curve for control panels and IEC applications.

Eaton WMZS2B20 delivers reliable 20A Type B supplementary protection for control circuits, offering fast trip performance, DIN-rail mounting, and UL1077 compliance.

Eaton XTCEXSAB10 adds a reliable 1NO auxiliary contact to XTCE Frame B contactors, enhancing XT Series control systems with safe, compact side-mount functionality.

Allen-Bradley 194R-NJ030P3 fused rotary disconnect switch offers 30A, 600V isolation for industrial panels, supporting Class CC/J fuses and high-fault protection.

The Eaton WMZS2C50 2-pole 50A Type C breaker offers reliable DIN-rail protection for moderate-inrush industrial loads, delivering resettable thermal-magnetic performance.

Allen-Bradley 700-HN126 Relay Socket supports relay base connection with screw terminals, 10A 300V rating, and visible UL Recognized, CE, and CSA markings.

Siemens 5SJ4110-7HG42 delivers reliable 10A C-curve protection for DIN-rail panels, offering SENTRON-series performance for industrial and commercial circuits.

The Universal 447-LR-TC-P is a 120V magnetic fluorescent ballast designed to operate two lamps in trigger-start configurations. It supports F20T12, F15T8, and F15T12 lamps and features a low power factor, lag-type circuit. UL and CSA certifications support indoor and Type 1 outdoor use.

Killark 380S stamped steel conduit body cover designed for 1-inch trade size conduit bodies. Constructed from stamped steel with stainless steel screws, this UL and CSA approved blank cover is used to close and protect conduit body openings in electrical installations.

The IDEC APW299D-W-120V is a panel-mount white pilot light indicator designed for industrial control applications. This unit operates on 120V AC and features a dome-style white lens with a metallic bezel. It is UL listed and CSA marked, with screw terminal connections housed in a compact rectangular base.

Allen-Bradley 100-C12ZA10 3-pole contactor brings IEC motor-control switching with a 220V DC coil, 1 NO auxiliary contact, and marked AC load ratings.

The Universal 827-SLH-TC-P is a magnetic instant-start fluorescent ballast designed to operate two slimline lamps on a 277V, 60 Hz power supply. It supports series lamp operation and is intended for replacement use in compatible commercial and industrial lighting fixtures.

Square D 2510KG1 manual switch delivers reliable 30A control for single-phase systems with a 2-pole toggle design and non-reversing operation in a compact NEMA 1 enclosure.

Appleton ACP6044BC Powertite pin and sleeve plug delivers 60A 4-wire, 4-pole industrial power connection for portable or fixed equipment, with weatherproof performance up to 600 VAC, 250 VDC, and 50-400 Hz operation.

The Square D 8501NR61 is an 11-pin plug-in relay socket designed for use with compatible Square D relays and timers. It features single-tier screw clamp terminals and supports both panel and DIN rail mounting for industrial control applications.

The Eaton H2006B-3 is a Freedom NEMA heater coil set designed for thermal overload protection in motor control applications. This Class 20 standard trip heater pack supports selectable full load current settings from 1.79A to 2.9A via dial positions A–D and is supplied as a factory-calibrated set of three elements.

The Telemecanique XSAV32373 is an inductive proximity sensor designed for rotation monitoring applications. It features a cylindrical M30 nickel plated brass housing, 10 mm nominal sensing distance, PNP output with 1 NC function, and operates on 12 to 48 V DC. The sensor includes a fixed 2 meter cable connection and is rated IP67.

TDK-Lambda NNS30-15 linear AC/DC power supply with 15V DC output at 3.4A and 51W max power. NN Series unit with selectable AC input ranges, low ripple, remote sense, remote programming, and convection cooling.

AmRad RA200044-505 capacitor delivers reliable 5.0 MFD motor performance for HVAC and compressors; legacy model replaced by USA2029 for long-term durability.

Eaton PKZM0-6,3/NHI11 motor-protective circuit breaker delivers adjustable 4-6.3 A thermomagnetic motor protection, screw-terminal wiring, and compact panel-ready installation for motor control applications.

The HOFFMAN A24246GSC electrical enclosure delivers screw-cover, gasketed protection for wiring, junction, pull, and terminal box applications exposed to windblown dust and rain, with galvanized steel construction and IP66 performance.

The Siemens 5SJ4210-7HG42 is a 2-pole miniature circuit breaker from the 5SJ4 Series, rated at 10 A and up to 277 V. It provides thermal-magnetic overcurrent protection for branch circuit and feeder applications and is designed for standard 35 mm DIN rail mounting.

The Telemecanique GV2-AE11 is a front-mounted auxiliary contact block with 1 normally open and 1 normally closed contact. Designed for TeSys GV2 and GV3 motor circuit breakers, it provides status signaling and control feedback using screw clamp terminals.

Eaton WMZT1C10 offers reliable 10A C-curve protection for 277/480V panels, delivering dependable DIN-rail circuit safety for industrial and commercial systems.

The NOARK Ex9S32A32A is a 3-pole thermal-magnetic manual motor starter with an adjustable 24–32A current setting range and Class 10 overload protection. Designed for motor branch circuit protection, it provides manual isolation, manual motor control, and short-circuit protection with rotary handle operation.