Search results for: 'designed house'

The Potter & Brumfield KUP14D15 is an enclosed electromechanical control relay with a 12 VDC coil and a 3PDT (3 Form C) contact configuration. This relay features an 11-pin blade terminal base and a clear polycarbonate dust cover for component visibility.

The Honeywell 3PA2 is a zinc limit switch enclosure designed for use with basic switches. It provides a durable gray chassis-style housing with screw mounting for industrial applications requiring an enclosed switch case. Intended to protect switch terminals and internal mechanisms.

The Tristar S0803-0000 is a compact 12V DC white LED indicator designed for 1/2" hole mounting. This polarity-sensitive LED draws approximately 0.02–0.03 amps and consumes about 0.25 watts. The unit features a 1/2" diameter body with a 1.75" housing length and is suitable for low-draw DC indicator applications.

Total Source TSA/6325G1 175A connector delivers high-current electrical connection up to 600V with durable gray SB-style housing for secure power transfer.

The Molex 1300140037 is a 7-pole female circular connector pigtail designed for industrial electrical connections. It features a straight orientation, front panel mount configuration, and a 1/2-14 NPT mounting thread. The assembly is terminated with UL 1015 16 AWG lead wires and housed in a zinc die-cast body with black epoxy finish for durability.

RP Lighting + Fans REL21 LED Emergency Light delivers reliable dual-head illumination for emergency egress lighting with 120/277V operation, thermoplastic housing, and optical lens coverage for open areas or pathways.

The Edwards Signaling 48XBRMG120A is a green LED visual signal light designed for indoor and outdoor industrial applications. Operating on 120 VAC, this dual-mode beacon supports steady-on or flashing operation and is housed in a corrosion-resistant NEMA 4X enclosure.

Littelfuse LPSC-ID is a 600 V AC/DC, 30 A Class CC fuse holder for branch circuit protection, combining dead front touch-safe construction, DIN-rail mounting, and blown-fuse indication above 80 V.

The Kepco RA60 is a 19-inch rack-mount mainframe designed to house up to three Kepco HSP Series DC power supply modules. This configuration includes HSP 24-60MR and HSP 24-60R modules, supporting parallel operation, hot-swap capability, and high-current 24 VDC power distribution.

Moore Industries DPS 240 DIN-style power supply configured for 42 VDC output at 240 mA from a 117 VAC input. Linear regulated design with adjustable voltage, current limiting, and isolated output for powering 2-wire transmitters and instrumentation circuits.

Phoenix Contact 2832771-HW16 FL Switch SF 8TX delivers reliable 8-port 10/100 Mbps industrial Ethernet expansion with plug-and-play setup and DIN-rail mounting.

Honeywell GLFA33A2B is a MICRO SWITCH GLA Series industrial limit switch designed to EN50041 standards with 30 mm x 60 mm mounting. This configuration features a side rotary adjustable lever with steel roller, slow action break-before-make (BBM) 1NC/1NO contact arrangement, gold-plated contacts for low-energy applications, and an integrated yellow LED pilot light.

Phoenix Contact 2891152 FL Switch SFN 5TX delivers reliable 10/100 Mbps industrial Ethernet networking with 5 RJ45 ports, DIN-rail mounting, and plug-and-play operation.

Leviton 2643 locking connector delivers secure L8-30R connectivity for 30A 480V circuits, supporting reliable power distribution in industrial environments with twist-lock engagement.

Eagle Eye HGD-SB sensor board for HGD-Series gas detectors. PCB assembly with integrated components for gas detection systems.

Leviton 069-ML1-C MiniLock Connector delivers secure 15A 125V industrial-grade power connectivity using a compact locking design for reliable electrical connections in demanding environments.

The SSAC FS165-30T is a solid state beacon flasher designed for tower and obstruction lighting systems. Operating on 230VAC, it supports up to 5000W loads and provides an OFF-first flash sequence at 30 flashes per minute. Encapsulated construction supports demanding environments.

Hubbell HBL26420 Hubbellock industrial receptacle rated 60A 600V AC, 3-pole 4-wire grounding, screw terminals, cast aluminum long housing.

The IDEC APW299D-W-120V is a panel-mount white pilot light indicator designed for industrial control applications. This unit operates on 120V AC and features a dome-style white lens with a metallic bezel. It is UL listed and CSA marked, with screw terminal connections housed in a compact rectangular base.

The AMP 531-353-5 is a panel mount card edge connector from TE Connectivity AMP Connectors. It features six power positions arranged in two rows with female contacts and solder termination. The connector is designed for panel mounting and accepts 0.062 inch card thickness, using a glass-filled polyester housing.

The Crouzet PJR 110A P4700 is a plug-in alternator control relay operating on a 110 VAC supply. The module provides SPDT relay output rated at 10 A and is housed in a compact rectangular enclosure with front position indicators. Used in control and protection circuits where monitored voltage conditions determine relay actuation.

Philips 3186GH242T450APA9 aluminum electrolytic capacitor designed for industrial power electronics, offering 2400µF capacitance, 450VDC rating, and 525V surge handling in screw-terminal form.