Search results for: 'lines'

Siemens 3NA3 814 fuse link delivers reliable 35A NH000 gG protection for SENTRON systems, offering high-breaking capacity and clear front indication for safe operation.

Allen-Bradley 100-C12ZA10 3-pole contactor brings IEC motor-control switching with a 220V DC coil, 1 NO auxiliary contact, and marked AC load ratings.

The MTL IOP32D is a DIN-rail mounted surge protection device designed to protect digital and analogue I/O circuits. It provides surge protection for two independent loops (four wires) using a hybrid protection circuit rated up to 20 kA. The device is suitable for industrial control and instrumentation applications and is certified for use in hazardous areas.

AEMC AX503 Triple Output DC Power Supply comes with 30V, 2.5A outputs and 5V blind output, master-slave tracking, and LED display. Ideal for labs and testing.

Allen-Bradley 871A-TS5-DM1 M12 5-Pin field-attachable connector offers reliable IP67 wiring for sensors and automation devices, supporting 6–8 mm cables.

Black Box IC107A-R2 RS-232↔RS-422/485 converter for data-only serial communication. Supports 4-wire full-duplex operation for point-to-point or multipoint links. Provides a DB25 female RS-232 interface and a 4-pin terminal block for RS-422/485 with TX/RX/PWR LEDs.

The Corcom NF21091-3 is a chassis-mount EMI line filter rated for 16 A at 250 VAC, 50/60 Hz. This metal-enclosed filter features clearly labeled LINE and LOAD terminals and is designed for installation in AC power input paths where conducted electrical noise reduction is required.

GAI-Tronics 7335-001 is a 5 party line weatherproof non-metallic enclosure built for analog Page/Party intercom systems, combining NEMA 4X outdoor protection, 120 VAC input, and reinforced polyester fiberglass construction for demanding installations.

Allen-Bradley 700-HK36Z24 relay delivers reliable 24V DC SPDT control switching for automation panels, compatible with 700-HN121 slim-line sockets.

The General Electric CR305X100E is a side-mounted auxiliary contact adder block providing one normally closed (1 NC) contact for GE 200- and 300-Line starters and contactors. It is designed for field installation onto a basic auxiliary contact block and is rated up to 600 VAC and 250 VDC.

The Hammond Power CRX06D1BC is a three-phase iron core line reactor rated for 600 VAC and 6.1 A. Part of the HPS Centurion® R Series, it provides controlled impedance to mitigate harmonics and electrical transients in AC drive systems operating at 50/60 Hz.

B-Line B2010 conduit hanger strut clamp secures 1-inch conduit to standard strut systems with a durable two-piece steel design. Supports reliable pipe mounting with secure fastening and corrosion-resistant zinc finish.

Square D FAL34050 delivers 50A, 3-pole thermal-magnetic circuit protection for 480V electrical systems with unit-mount installation and line/load lug connections.

General Electric THQL2120 delivers reliable 20A, 2-pole protection for GE Q-Line load centers. Ideal for residential circuits and 240V equipment with plug-in installation.

GE THQL32020 Q-Line breaker delivers reliable thermal-magnetic protection with quick-make/quick-break action and 3-pole 20A design for GE load centers.

The Siemens TA2J6500 is an aluminum body 2-barrel lug accessory for use with 2- or 3-pole 200A–400A JD and LD frame molded case circuit breakers. It supports copper conductors from 3/0 AWG to 500 kcmil and aluminum conductors from 4/0 AWG to 500 kcmil, and is suitable for both line and load side connections.

GE TED134030 breaker delivers reliable 30A thermal-magnetic protection for GE Spectra E150 systems, ensuring safe, high-performance operation in 480V applications.

Littelfuse LPSC-ID is a Class CC fuse holder rated 600V AC/DC and 30A, built for panel protection with blown fuse indication, line/load labeling, and DIN rail mounting.

Moore Industries DPS 240 DIN-style power supply configured for 42 VDC output at 240 mA from a 117 VAC input. Linear regulated design with adjustable voltage, current limiting, and isolated output for powering 2-wire transmitters and instrumentation circuits.

The Square D 9065-AT-1L is a thermal overload relay designed for motor protection applications. This unit features a manual reset mechanism and copper line/load terminals, as shown. Identified by manufacturer labeling, it is part of the Square D Class 9065 series.

The Allen-Bradley 700-HK32Z24 offers reliable DPDT switching in a slim 24V DC plug-in relay design, ideal for high-density control panels and industrial automation.

Leviton 065-4579-C locking connector delivers 15A, 250V performance for secure industrial-grade electrical connections. Designed for 2-pole, 3-wire grounding configurations to maintain reliable power continuity in demanding environments.

Square D 9065SS110 Motor Logic solid-state overload relay delivers adjustable 9-27A motor overload protection in a 600VAC Class 10 design sized for NEMA Size 1 control applications.

General Electric THQL32070 70A 3-Pole Breaker: Reliable thermal-magnetic protection with plug-in design, HACR rating, and quick-make, quick-break mechanism.

Schneider Electric Telemecanique LC1 D09 10 is a 3-pole magnetic contactor for AC motor control and circuit switching, with an integrated 1 NO auxiliary contact and motor-starting capability up to 4 kW at 400V.