Search results for: 'mechanical god'

Allen-Bradley 1492-CB1-H010 supplementary protector delivers 1-amp single-pole thermal-magnetic overcurrent protection for industrial control circuits using DIN rail mounting.

Schneider Electric CAD50G7 is a TeSys Deca control relay with five normally open contacts and a 120 VAC 50/60 Hz control coil. Rated up to 690 VAC and 10 A, it supports DIN rail or panel mounting and is designed for industrial control circuit applications.

The GE IC2956A206A is an industrial interlock snap-action contact block used as a control component within safety and machine control systems. This unit is a standalone mechanical contact block featuring a snap-action mechanism for consistent contact switching. No additional accessories or hardware are included.

Phoenix Contact UT 6-HESILA fuse modular terminal block designed for 6.3 x 32 mm glass or ceramic fuses. Rated at 250 V and 10 A, this DIN-rail mount terminal block uses a screw connection method and includes an integrated LED fault indicator for fuse status monitoring. Supplied as a quantity of 10 units.

The Allen-Bradley 815-BOV4 is a manual reset overload relay designed for motor control applications. It provides thermal overload protection using a eutectic alloy mechanism and supports up to 27 A at 600 V AC. Suitable for use with Allen-Bradley motor control systems.

The Appleton ST-4575 is a 3/4" 45° liquidtight connector designed for use with liquidtight flexible metal conduit (LFMC). This ST Series plain throat fitting provides a dependable connection while sealing out oil, water, dust, dirt, and fumes. Constructed with a malleable iron body and finished with zinc electroplate, chromate, and epoxy powder coat, it is suitable for wet locations and Class I, Division 2 environments.

The Square D 9065-AT-1L is a thermal overload relay designed for motor protection applications. This unit features a manual reset mechanism and copper line/load terminals, as shown. Identified by manufacturer labeling, it is part of the Square D Class 9065 series.

The Allen-Bradley 800T-XA2 Series D is a 30 mm industrial control contact block featuring two normally open contacts and an A600 NEMA pilot duty rating. Designed for use with Bulletin 800T operators, it provides screw-terminal connections and base-mount installation for industrial control panels.

ABB TB806 Bus Inlet is a Modulebus extension cable adaptor with a D-sub 25 male connector. It is used with the TK801 extension cable to extend the ModuleBus in ABB S800 I/O systems. One adaptor is required per extension cable.

The T.A. Systems EL-9060 is a sonic relay board module designed for industrial control applications operating on 24VDC. It is used to translate low-power control signals into higher-power switching actions within industrial automation and machinery control systems.

The Mitsubishi CP30-BA 1-Pole 10A M-Curve Circuit Protector is a compact supplementary circuit breaker designed for protection of low-capacity control circuits, motors, and transformers. It supports AC 250 V and DC 65 V operation and mounts on a standard 35 mm DIN rail using screw terminals.

The Mitsubishi CP30-BA 1-Pole 7A M-Curve Circuit Protector is a compact hydraulic-magnetic circuit protector designed for supplementary protection of low-capacity industrial control circuits. It supports AC 250 V and DC 65 V operation and uses an M-curve trip characteristic suitable for moderate inrush loads.

The Siemens 3TX4422-0A SIRIUS auxiliary contact block features 2NO + 2NC instantaneous contacts with screw-type terminals. Designed for use with contactor relays and power contactors according to EN 50011, it supports snap-on mounting, IP20 front protection, and positively driven operation per IEC 60947-5-1.

The Phoenix Contact RAD-OUT-8D-REL is an 8-channel digital relay output extension module for Radioline wireless systems. It provides floating relay contacts for reliable signal switching and supports DIN rail mounting in industrial automation environments.

The Siemens Sentron ED43B020 is a 3-pole, 20 amp molded case circuit breaker rated for 480 VAC operation. It provides thermal-magnetic protection with long-time and instantaneous trip functions and is designed for use in commercial and industrial power distribution systems.

Hubbell 0740-113-36 Deluxe Cord Grip enables secure liquidtight cable entry for .500"–.625" insulated cables with corrosion-resistant stainless steel mesh and oil-resistant sealing.

The HP A4978-62025 is an LCD and power switch subassembly mounted in a molded plastic bracket. The assembly integrates a monochrome LCD display and a front-panel power switch with a fixed ribbon cable terminating in a D-sub style connector. Identified by assembly label A4978-62025.

The Emerson Ovation WH5D-2FF / 1X00416H03 power supply module provides regulated 24 VDC output for Ovation distributed control system backbones. The enclosed industrial module supports high-current control applications using wide-range AC or DC input power.

Leviton 1202-2 delivers a durable, industrial double-pole toggle switch with quiet operation, silver alloy contacts, and 15A 120/277V performance for heavy-duty applications.

Eaton XTCEXSAB10 adds a reliable 1NO auxiliary contact to XTCE Frame B contactors, enhancing XT Series control systems with safe, compact side-mount functionality.

Siemens SIRIUS 3RT2035-1AK60 power contactor rated 41 A at AC-3 (400 V) with 18.5 kW operating power. 3-pole design with integrated 1 NO + 1 NC auxiliary contacts. Control supply voltage 110 V AC 50 Hz / 120 V AC 60 Hz. Screw-type terminals. Size S2 frame.

The Phoenix Contact 560-3889 is a power distribution interface module used within Emerson Ovation distributed control systems. It functions as a marshalling and power distribution interface between controllers and I/O field devices, supporting structured wiring through screw terminal connections in PLC and DCS panels.