Search results for: 'rate.'

Forney 312 High Energy Spark Igniter delivers Class 3 direct spark ignition for oil or gas igniters and small burners with 12 joules per spark, 2000 VDC output, and approximately 3 sparks per second.

The SSAC FS165-30T is a solid state beacon flasher designed for tower and obstruction lighting systems. Operating on 230VAC, it supports up to 5000W loads and provides an OFF-first flash sequence at 30 flashes per minute. Encapsulated construction supports demanding environments.

Schneider Electric CAD50G7 is a TeSys Deca control relay with five normally open contacts and a 120 VAC 50/60 Hz control coil. Rated up to 690 VAC and 10 A, it supports DIN rail or panel mounting and is designed for industrial control circuit applications.

The Edwards Signaling 48XBRMG120A is a green LED visual signal light designed for indoor and outdoor industrial applications. Operating on 120 VAC, this dual-mode beacon supports steady-on or flashing operation and is housed in a corrosion-resistant NEMA 4X enclosure.

Emerson Ovation 1C31189G31 Speed Detector Module for the Ovation DCS. This module monitors rotating equipment speed and converts sensor input into digital data for real-time control, monitoring, and diagnostics.

Protect your power electronics with the Mersen W300008 PC31UD69V630TF  Protistor® Size 31 aR Fuse—630A, high-speed, and built for reliable semiconductor protection at up to 700VAC!

Siemens 6ES7 972-0BA60-0XA0 PROFIBUS DP connector offers FastConnect wiring, 35° cable exit, and integrated termination for reliable RS485 network installations.

Black Box IC107A-R2 RS-232↔RS-422/485 converter for data-only serial communication. Supports 4-wire full-duplex operation for point-to-point or multipoint links. Provides a DB25 female RS-232 interface and a 4-pin terminal block for RS-422/485 with TX/RX/PWR LEDs.

KATKO KU 380N load break switch delivers 3-pole isolation and switching up to 80A at 690V AC-22, supporting reliable control and disconnection of electrical loads in industrial power systems.

Eaton PKZM0-25/NHI11 motor-protective circuit breaker delivers adjustable 20–25 A thermomagnetic motor protection with phase-failure sensitivity for motor control and panel protection applications.

The Eaton FAZ-C20/3 is a 20 A, three-pole miniature circuit breaker from the Moeller xEffect FAZ series. It features a C tripping characteristic and is rated for 240 V AC / 415 V AC applications. Designed for industrial and advanced commercial switchgear, it mounts on a 35 mm top-hat rail in accordance with IEC/EN 60715 and supports modular installation with a width of three modules.

Eaton WMZTBCON miniature circuit breaker connector with E Nr. 64883 marking and visible UL/IEC electrical ratings for circuit protection assemblies.

Eaton PKZM0-10 motor-protective circuit breaker delivers adjustable 6.3-10 A motor protection, phase-failure sensitivity, and 4 kW performance at 380/400 V AC-3e in a compact three-pole design.

The Eaton P1-25/V/SVB is a 25 A, three-pole main switch from the Eaton Moeller® P1 series designed for rear mounting applications. It features a door-coupling rotary drive with a red rotary handle and yellow locking ring, and supports emergency switching off functionality. The switch is rated up to 690 V AC, provides IP65 front protection, and is lockable in the 0 (Off) position for secured isolation.

Mersen / Ferraz Shawmut A155F2D0R0-125E is a 15.5 kV, 125E medium-voltage, E-rated Amp-Trap® CS-3 series ferrule-mounted fuse. Designed for transformer and distribution protection, it provides current-limiting performance with visual blown-fuse indication and compatibility with standard spring-reinforced clips.

Challenger C30-2 miscellaneous switch rated 30 amps, 2 poles, 240AC. UL listed unit with copper or aluminum wire compatibility and 60°C/75°C wire marking.

Bussmann JP60030-3PR is a 3-pole Class J pyramid fuse block rated 30 A and 600 V for panel-mounted circuit protection using LPJ, DFJ, and JKS fuses in control and power distribution assemblies.

Eaton XTCEXFAC20 auxiliary contactor supports control-panel auxiliary switching with two normally open contacts and visible AC/DC ratings.

Eaton Cutler-Hammer C320KGS1 is a Freedom Series side-mounted auxiliary contact block with 1NO contact configuration for NEMA sizes 00 to 2 and IEC sizes A to K.

The Mitsubishi CP30-BA 1-Pole 5A M-Curve Circuit Protector is a compact DIN-rail-mounted supplementary protector designed for low-capacity control circuits. It features a medium-speed hydraulic-magnetic tripping characteristic, 5 A current rating, and supports AC 250 V or DC 65 V operation in industrial control panels.

The Siemens 3TF3000-0A is a 3-pole AC contactor from the 3TF30 series rated 9 A (AC-3 at 380/400 V) with insulation voltage up to 690 V. Designed for motor control applications at 50/60 Hz, it complies with IEC 947 and VDE 0660 standards.

Eaton DILEM-10 mini contactor delivers 8.80A switching, three-pole FVNR control, 1NO contact configuration, and 110–120 Vac coil operation in a compact IEC frame.

Eaton DILEM-10 XTMC9A10B XT IEC mini contactor delivers 3-pole full-voltage non-reversing control with an 8.80A rating, 20A continuous rating, 220–240 Vac coil, 1 NO contact configuration, and screw terminals.

Allen-Bradley 1489-M1C250 is a 25A UL489-listed 1-pole DIN-rail circuit breaker with C-curve thermal-magnetic protection, designed for reliable branch circuit protection in industrial control panels.

Philips 3534B5A0460A110A3 aluminum electrolytic capacitor offers 460–553 MFD capacitance with a 110–125 VAC, 50/60 Hz rating in a cylindrical can format for component replacement and parts matching.