Search results for: 'values'

Phoenix Contact QUINT-PS/1AC/24DC/10 DIN-rail power supply provides 24 V DC (adjustable 18–29.5 V) at 10 A from a wide-range 1-phase AC or DC input. Includes DC OK signaling, BOOST indication, and SFB technology support.

The IDEC CS-10 ACSSO contact block is a cam switch component configured with one normally open contact and circuit designation C-2004. It is rated for 600 V insulation voltage and 10 A thermal current, utilizes silver contacts, and is designed for industrial control applications requiring reliable mechanical switching performance.

Airpax UPL111-25620-1 is a 3-pole magnetic-hydraulic circuit breaker for panel-mounted power switching and circuit protection in commercial and industrial equipment.

Challenger C30-2 miscellaneous switch rated 30 amps, 2 poles, 240AC. UL listed unit with copper or aluminum wire compatibility and 60°C/75°C wire marking.

The Advance L-220-F is a magnetic reactor ballast designed to operate two 15W or 20W preheat fluorescent lamps at 120V AC, 60 Hz. It regulates lamp current using an inductive core and requires external starters for lamp ignition in preheat fluorescent systems.

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

Philips 3534B5A0460A110A3 aluminum electrolytic capacitor offers 460–553 MFD capacitance with a 110–125 VAC, 50/60 Hz rating in a cylindrical can format for component replacement and parts matching.

The Siemens Sentron ED43B020 is a 3-pole, 20 amp molded case circuit breaker rated for 480 VAC operation. It provides thermal-magnetic protection with long-time and instantaneous trip functions and is designed for use in commercial and industrial power distribution systems.

Eaton Cutler-Hammer C320KGS1 is a Freedom Series side-mounted auxiliary contact block with 1NO contact configuration for NEMA sizes 00 to 2 and IEC sizes A to K.

Siemens A1-108-101-502 operator display control panel for parameter access, status monitoring, and fault diagnostics in compatible SIMOREG DC drive systems.

Siemens 3RP1505-1BQ30 SIRIUS timing relay with multi-function operation, 2 changeover contacts, 15 time setting ranges, LED indication, and screw-type terminals.

Eaton FH80 overload relay heater element provides reliable thermal motor protection for A200/B100 starters, supporting accurate overload trip performance.

Eaton DILM9-10 / XTCE009B10T 24V 50/60Hz 3-pole motor contactor with 9A AC-3 rating, 4 kW capacity, 1NO auxiliary contact, and screw terminals for dependable control of pumps, fans, conveyors, and OEM panels.

Siemens SITOP select diagnosis module 6EP1961-2BA00 for 24 V DC systems. 4-channel electronic module (4x 10 A) that distributes and monitors load current with adjustable trip thresholds from 2–10 A. Supports selective channel shutdown on overload/short circuit with common signaling contact.

GE Power 730157 DILOS 2-160 delivers 4-pole manual switch disconnection with 160A Ith and 690V Ui markings for electrical control and isolation setups.

GE C208LSIR MicroVersaTrip Plus Trip Unit delivers replacement circuit breaker trip control with front-panel setup access, status display, and 800A sensor designation for compatible GE breaker systems.

Helwig Carbon H704 high-speed turbine carbon brush is built for turbo generator service, delivering low-friction electrical contact, balanced current distribution, and dependable performance at peripheral speeds up to 180 mph.

The Allen-Bradley 815-BOV4 is a manual reset overload relay designed for motor control applications. It provides thermal overload protection using a eutectic alloy mechanism and supports up to 27 A at 600 V AC. Suitable for use with Allen-Bradley motor control systems.

Moore Industries TIY/PRG/4-20MA/12-42DC [DIN] is a programmable isolated thermocouple transmitter that accepts common thermocouple types and millivolt inputs and delivers a linear 4-20mA output with front-panel ranging, display indication, and self-diagnostics.

IPC 005-4240 power resistor delivers 110 ohm resistance with 800W heat dissipation for dynamic braking, load testing, and industrial energy control applications.

Leviton 061-04720-C Locking Plug delivers 15A, 125V NEMA L5-15P twist-lock connectivity for 2-pole, 3-wire grounding power connections.

Orbit OF7716 2-inch EMT set-screw coupling delivers secure steel conduit joining with zinc electro-plated construction for reliable electrical raceway continuity in EMT installations.

Omega CN9111A temperature controller delivers precise thermal regulation with dual relay outputs and 115V operation, supporting controlled heating and cooling processes across industrial environments.

R. STAHL INTRINSPAK 9001/02-093-030-10 safety barrier for industrial control and intrinsically safe interface applications, identified with 250V and 30 mA raw-data rating information.

General Electric CR2790E100A2 general purpose control relay with 115V AC 60Hz coil, 10A contact rating, and 300V max rating for industrial control and switching applications.