Search results for: 'and isaiah'

The General Electric CR104PLT43 is a 30.5mm push-to-test indicator light designed for 240V AC industrial automation systems. Part of the GE CR104P series, it utilizes a resistor power supply and supports machine-tool and control panel applications where manual lamp verification is required.

Siemens SM-30 580-821670 Switch Module delivers two manually operated SPDT switches for fire alarm and control functions including signal silence, relay activation, disconnect, drill, override, and bypass control.

The Graco 120013 Proportional V/P Valve is a genuine OEM replacement component used in Graco automatic proportioning systems. It provides proportional pressure control within Flow Control Modules such as Model 249849 and 24H989, enabling regulated material flow in industrial applications.

The Universal 827-SLH-TC-P is a magnetic instant-start fluorescent ballast designed to operate two slimline lamps on a 277V, 60 Hz power supply. It supports series lamp operation and is intended for replacement use in compatible commercial and industrial lighting fixtures.

The Telemotive E7207-1 Circuit Board is an industrial automation component used in Telemotive radio control systems. Identified by part number E7207-1, this board is commonly applied in industrial control environments including crane and hoist remote control systems.

The Edwards Signaling 48XBRMG120A is a green LED visual signal light designed for indoor and outdoor industrial applications. Operating on 120 VAC, this dual-mode beacon supports steady-on or flashing operation and is housed in a corrosion-resistant NEMA 4X enclosure.

The IDEC APW299D-W-120V is a panel-mount white pilot light indicator designed for industrial control applications. This unit operates on 120V AC and features a dome-style white lens with a metallic bezel. It is UL listed and CSA marked, with screw terminal connections housed in a compact rectangular base.

The GE IC2956A206A is an industrial interlock snap-action contact block used as a control component within safety and machine control systems. This unit is a standalone mechanical contact block featuring a snap-action mechanism for consistent contact switching. No additional accessories or hardware are included.

Schneider Electric Telemecanique LC1 D09 10 is a 3-pole magnetic contactor for AC motor control and circuit switching, with an integrated 1 NO auxiliary contact and motor-starting capability up to 4 kW at 400V.

The Telemecanique XSAV32373 is an inductive proximity sensor designed for rotation monitoring applications. It features a cylindrical M30 nickel plated brass housing, 10 mm nominal sensing distance, PNP output with 1 NC function, and operates on 12 to 48 V DC. The sensor includes a fixed 2 meter cable connection and is rated IP67.

Westinghouse 1C31129G32 Ovation analog output module with 0-10V analog output labeling. Industrial control module for Ovation system applications. Module only.

The Crouzet PJR 110A P4700 is a plug-in alternator control relay operating on a 110 VAC supply. The module provides SPDT relay output rated at 10 A and is housed in a compact rectangular enclosure with front position indicators. Used in control and protection circuits where monitored voltage conditions determine relay actuation.

The Tristar S0803-0000 is a compact 12V DC white LED indicator designed for 1/2" hole mounting. This polarity-sensitive LED draws approximately 0.02–0.03 amps and consumes about 0.25 watts. The unit features a 1/2" diameter body with a 1.75" housing length and is suitable for low-draw DC indicator applications.

System Sensor P4RK horn strobe delivers audible and visual fire notification in a red wall-mount four-wire configuration with FIRE lettering for clearly marked alarm signaling.

The Functional Devices RIB2401B is a 20 Amp SPDT power control relay with a continuous duty coil and multi-voltage input of 24 Vac/dc or 120 Vac, 50–60 Hz. Housed in a NEMA 1 enclosure accepted for plenum use, it includes a visible LED status indicator and 16-inch 600V rated lead wires. The relay supports general purpose, ballast, pilot duty, tungsten, and motor loads within its published ratings.

The Allen-Bradley 800S-R2SX is a standard-duty, two-position selector switch designed for surface-mount industrial control applications. It features a maintained ON/OFF knob operation, screw terminal wiring, and a NEMA Type 1 enclosure for general-purpose environments.

The Phoenix Contact RAD-OUT-4A-I is a compact analog extension module providing four independent 4–20 mA current outputs. Designed for DIN rail mounting, it operates from a 9–30 V DC supply via a bus foot connector and supports screw terminal wiring. The module is UL listed for Class I, Division 2 hazardous locations and CE compliant.

The Telemecanique GV2-AE11 is a front-mounted auxiliary contact block with 1 normally open and 1 normally closed contact. Designed for TeSys GV2 and GV3 motor circuit breakers, it provides status signaling and control feedback using screw clamp terminals.

The Hammond Power CRX06D1BC is a three-phase iron core line reactor rated for 600 VAC and 6.1 A. Part of the HPS Centurion® R Series, it provides controlled impedance to mitigate harmonics and electrical transients in AC drive systems operating at 50/60 Hz.

Schneider Electric CAD50G7 is a TeSys Deca control relay with five normally open contacts and a 120 VAC 50/60 Hz control coil. Rated up to 690 VAC and 10 A, it supports DIN rail or panel mounting and is designed for industrial control circuit applications.

Yamatake Honeywell 8240-7444-001 ENH Relay Terminal Panel. This panel provides relay termination using multiple installed plug-in relays and numbered screw terminals on a single PCB assembly. Identified by manufacturer silkscreen and assembly number only.

The Eaton E22HL3X4 is a 22.5 mm non-metallic heavy-duty assembled indicating light designed for panel mounting. It features a green LED operating at 24 VAC/VDC full voltage and uses a non-relampable cluster style construction. Rated for NEMA 3, 3R, 4, 4X, 12, and 13 environments.

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

The Fisher R3570CX0022 is a pneumatic valve positioner repair kit intended for maintenance of Fisher 3570 Series pneumatic valve positioners. This kit supports servicing of positioners used in industrial control valve assemblies and is not a complete valve or positioner.