Search results for: 'kaiop'

Moore Industries RBX/3W80-160/4-20MA/12-42DC-EZ100[HP] resistance bulb transmitter with 3-wire RTD input, 4-20mA output, 12-42VDC loop power, and front Zero/Span adjustment.

The Advance L-220-F is a magnetic reactor ballast designed to operate two 15W or 20W preheat fluorescent lamps at 120V AC, 60 Hz. It regulates lamp current using an inductive core and requires external starters for lamp ignition in preheat fluorescent systems.

The Honeywell HPK2-3 51401583-100 Enhanced Process Network Interface (EPNI) board is a core logic component used within Network Interface Modules in Honeywell TDC 3000 Distributed Control Systems. It supports data communication between control networks in industrial automation environments.

Yamatake Honeywell 8240-7444-001 ENH Relay Terminal Panel. This panel provides relay termination using multiple installed plug-in relays and numbered screw terminals on a single PCB assembly. Identified by manufacturer silkscreen and assembly number only.

The Fisher R3570CX0022 is a pneumatic valve positioner repair kit intended for maintenance of Fisher 3570 Series pneumatic valve positioners. This kit supports servicing of positioners used in industrial control valve assemblies and is not a complete valve or positioner.

The Phoenix Contact 560-3889 is a power distribution interface module used within Emerson Ovation distributed control systems. It functions as a marshalling and power distribution interface between controllers and I/O field devices, supporting structured wiring through screw terminal connections in PLC and DCS panels.

Allen-Bradley 193-BSB30 thermal overload relay delivers adjustable 2.0–3.0 A motor protection with Class 10 operation, manual or auto reset selection, and direct-mount Bulletin 193 form factor control.

The Phoenix Contact RAD-OUT-8D-REL is an 8-channel digital relay output extension module for Radioline wireless systems. It provides floating relay contacts for reliable signal switching and supports DIN rail mounting in industrial automation environments.

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

The General Electric CR305X100E is a side-mounted auxiliary contact adder block providing one normally closed (1 NC) contact for GE 200- and 300-Line starters and contactors. It is designed for field installation onto a basic auxiliary contact block and is rated up to 600 VAC and 250 VDC.

The Square D 8501NR61 is an 11-pin plug-in relay socket designed for use with compatible Square D relays and timers. It features single-tier screw clamp terminals and supports both panel and DIN rail mounting for industrial control applications.

Phoenix Contact 2832771-HW16 FL Switch SF 8TX delivers reliable 8-port 10/100 Mbps industrial Ethernet expansion with plug-and-play setup and DIN-rail mounting.

Eaton C0200E2AFB delivers 200 VA industrial control transformer performance with multi-voltage primary input and 120/115/110 V secondary output for control circuit power.

Schneider Electric Telemecanique LC1 D09 10 is a 3-pole magnetic contactor for AC motor control and circuit switching, with an integrated 1 NO auxiliary contact and motor-starting capability up to 4 kW at 400V.

Allen-Bradley 100-C16D*10 motor contactor built for switching motor loads in industrial control systems, featuring a 110-120V AC coil, 3-pole power contacts, and 1 NO auxiliary contact for control circuit integration.

Sprecher + Schuh CS7E-31E control relay with attached CS7-PV auxiliary contact block. Rated for up to 690V AC, this 4-pole industrial control relay is used for switching control circuits in panel and machine control applications.

Eaton Cutler-Hammer C320KGS1 is a Freedom Series side-mounted auxiliary contact block with 1NO contact configuration for NEMA sizes 00 to 2 and IEC sizes A to K.

Beckwith M-0193 Syncrocloser Unit delivers automatic generator-to-bus synchronization with adjustable voltage and frequency difference limits for controlled breaker closing in power system applications.

Emerson Ovation 1C31189G31 Speed Detector Module for the Ovation DCS. This module monitors rotating equipment speed and converts sensor input into digital data for real-time control, monitoring, and diagnostics.

Emerson Ovation 1C31219G01 Relay Output Electronics Module for interfacing between the Ovation controller and mechanical relays in a relay output assembly.

Siemens SIRIUS 3RT2035-1AK60 power contactor rated 41 A at AC-3 (400 V) with 18.5 kW operating power. 3-pole design with integrated 1 NO + 1 NC auxiliary contacts. Control supply voltage 110 V AC 50 Hz / 120 V AC 60 Hz. Screw-type terminals. Size S2 frame.

The Contrex M-Drive 4E is a digital DC motor drive and motion controller designed for closed-loop speed regulation of permanent magnet DC motors up to 2 HP. It supports dual AC input voltage, selectable DC output, serial communication, and integrated operator interface.

Allen-Bradley PHOTOSWITCH Series 9000 transmitted beam receiver sensor (42GRR-9003-QD, Series A) with 70–264V AC/DC operation, isolated N.O. solid-state (MOSFET) output, 4-pin AC Micro quick-disconnect, and IR 880 nm optics.