Search results for: 'material'

The Telemotive E7207-1 Circuit Board is an industrial automation component used in Telemotive radio control systems. Identified by part number E7207-1, this board is commonly applied in industrial control environments including crane and hoist remote control systems.

Challenger C30-2 miscellaneous switch rated 30 amps, 2 poles, 240AC. UL listed unit with copper or aluminum wire compatibility and 60°C/75°C wire marking.

The Allen-Bradley 800FM-MT44 is a metal emergency stop push button operator with a 40 mm red mushroom actuator and twist-to-release operation. Designed for 22.5 mm panel mounting, this non-illuminated operator is part of the Bulletin 800FM metal series for industrial control applications.

The Curtis Industries CUS8 is an 8-pin octal relay socket base designed for industrial control applications. Rated at 10A and up to 300V, it provides a standardized receptacle for compatible 2PDT octal relays or timers and supports secure screw-terminal wiring.

Eaton DILEM-10 mini contactor delivers 8.80A switching, three-pole FVNR control, 1NO contact configuration, and 110–120 Vac coil operation in a compact IEC frame.

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

The Allen-Bradley 800B-EAB is a 16 mm maintained square push button operator designed for light industrial and instrumentation applications. It features corrosion-proof plastic construction and gold-plated snap-action contact compatibility for reliable low-voltage switching when paired with Bulletin 800B contact blocks.

Schneider Electric 750XCXH-120A is an 11-pin octal plug-in power relay with a 120 VAC coil and 3PDT contact form. Designed for general-purpose and hazardous-location applications, it features silver alloy, gold-flashed contacts and continuous-duty operation.

The HP A4978-62025 is an LCD and power switch subassembly mounted in a molded plastic bracket. The assembly integrates a monochrome LCD display and a front-panel power switch with a fixed ribbon cable terminating in a D-sub style connector. Identified by assembly label A4978-62025.

The Struthers-Dunn W88AHPX-36 is a hermetically sealed 3PDT plug-in relay from the 88HP Series, rated 10A and configured for 120VAC operation. It features an 11-pin octal base and a sealed gray metal enclosure designed to prevent contamination and corrosion.

The Omron MY4Z DC24(S) is a general-purpose miniature power relay with a 4PDT contact configuration and 24 VDC coil. Rated for 5 A switching in four-pole applications, it is designed for sequence control and power switching in industrial control systems.

The Siemens 3SU1400-1AA10-1BA0 is a SIRIUS ACT contact module with one normally open contact. It features screw terminals and a snap-on design for front plate mounting behind compatible actuators. Designed for industrial control and signaling applications requiring reliable signal switching.

The Phoenix Contact 560-3889 is a power distribution interface module used within Emerson Ovation distributed control systems. It functions as a marshalling and power distribution interface between controllers and I/O field devices, supporting structured wiring through screw terminal connections in PLC and DCS panels.

SCHMERSAL SRB301LCI-24V: Reliable 24V safety controller relay with 3 safety contacts, signaling output, and advanced diagnostics for industrial protection.

Amperite 115C60 thermal time delay relay delivers fixed 60-second Delay on Break control with 115V AC/DC input, SPST-NC contacts, and a 3A resistive rating.

Minebea NMB-MAT 4715KL-05T-B40 is a 24V DC axial cooling fan with 119 x 119 x 38.4 mm dimensions, 3200 RPM speed, and approximately 118 CFM airflow for industrial equipment cooling.

The Contrex M-Drive 4E is a digital DC motor drive and motion controller designed for closed-loop speed regulation of permanent magnet DC motors up to 2 HP. It supports dual AC input voltage, selectable DC output, serial communication, and integrated operator interface.

The Allen-Bradley 800B-PS11 is a 16 mm snap-action contact block with one normally open and one normally closed contact. Designed for Bulletin 800B push button and selector switch operators, it supports reliable low-voltage switching and compact panel installations in light industrial and instrumentation applications.

General Electric B4A82S1F1V1 Type SBM Switch delivers compact rotary cam control for industrial panels, combining panel-mounted operation, double-break contacts, and 600 VAC/VDC, 20 A continuous switching capability.

Helwig Carbon H704 high-speed turbine carbon brush is built for turbo generator service, delivering low-friction electrical contact, balanced current distribution, and dependable performance at peripheral speeds up to 180 mph.

Forney 312 High Energy Spark Igniter delivers Class 3 direct spark ignition for oil or gas igniters and small burners with 12 joules per spark, 2000 VDC output, and approximately 3 sparks per second.

The Eaton P1-25/V/SVB is a 25 A, three-pole main switch from the Eaton Moeller® P1 series designed for rear mounting applications. It features a door-coupling rotary drive with a red rotary handle and yellow locking ring, and supports emergency switching off functionality. The switch is rated up to 690 V AC, provides IP65 front protection, and is lockable in the 0 (Off) position for secured isolation.