Search results for: 'motor used'

Allen-Bradley 194R-NN030P3 delivers reliable 30A non-fused power isolation for industrial panels, supporting safe lockout/tagout and rotary disconnect operation.

Siemens 3RT2035-3AK60 SIRIUS power contactor rated 41 A (AC-3) at 400 V with 18.5 kW operating power. Three-pole design with integrated 1 NO + 1 NC auxiliary contacts and 110 V AC (50 Hz) / 120 V AC (60 Hz) control coil. Size S2 frame with screw-type main terminals and spring-loaded auxiliary/control terminals.

Crydom Crouzet DR-ODC5 relay delivers fast, isolated DC load switching with a 5V control signal, DIN-rail mounting, and an LED indicator for industrial automation.

Allen-Bradley 100-D-S1-11 auxiliary contact block adds 1NO/1NC control contacts to 100-D series contactors, offering reliable screw-terminal expansion for industrial panels.

The Functional Devices RIB2401B is a 20 Amp SPDT power control relay with a continuous duty coil and multi-voltage input of 24 Vac/dc or 120 Vac, 50–60 Hz. Housed in a NEMA 1 enclosure accepted for plenum use, it includes a visible LED status indicator and 16-inch 600V rated lead wires. The relay supports general purpose, ballast, pilot duty, tungsten, and motor loads within its published ratings.

Eaton XTCEXSAB10 adds a reliable 1NO auxiliary contact to XTCE Frame B contactors, enhancing XT Series control systems with safe, compact side-mount functionality.

The ABB 1SVR430841R0200 CM-SRS.11 provides TRMS current monitoring with adjustable thresholds and multiple ranges, ideal for single-phase industrial control protection.

The TELEMECANIQUE LA4DC1U is a suppressor module designed for use with 3P LP1D09 to LP1D32 contactors. It provides flywheel diode suppression for DC control circuits rated from 24 to 250 V DC and mounts by screws for secure installation.

Sprecher + Schuh CS7E-31E control relay with attached CS7-PV auxiliary contact block. Rated for up to 690V AC, this 4-pole industrial control relay is used for switching control circuits in panel and machine control applications.

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

Hammond Power PH50MBMH industrial control transformer delivers 50 VA power conversion with multi-voltage primary and secondary configurations, supporting stable control circuit operation in machine tool and automation environments.

The General Electric CR104PLT43 is a 30.5mm push-to-test indicator light designed for 240V AC industrial automation systems. Part of the GE CR104P series, it utilizes a resistor power supply and supports machine-tool and control panel applications where manual lamp verification is required.

The Hammond Power CRX06D1BC is a three-phase iron core line reactor rated for 600 VAC and 6.1 A. Part of the HPS Centurion® R Series, it provides controlled impedance to mitigate harmonics and electrical transients in AC drive systems operating at 50/60 Hz.

The Eaton P1-25/V/SVB is a 25 A, three-pole main switch from the Eaton Moeller® P1 series designed for rear mounting applications. It features a door-coupling rotary drive with a red rotary handle and yellow locking ring, and supports emergency switching off functionality. The switch is rated up to 690 V AC, provides IP65 front protection, and is lockable in the 0 (Off) position for secured isolation.

Eaton E30KLA1 delivers reliable 1NO switching for E30 pushbuttons, featuring silver contacts and durable construction for industrial control applications.

Eaton DILEM-10 XTMC9A10B XT IEC mini contactor delivers 3-pole full-voltage non-reversing control with an 8.80A rating, 20A continuous rating, 220–240 Vac coil, 1 NO contact configuration, and screw terminals.

Allen Bradley 100S-C09EJ32BC IEC safety contactor with 9A AC-3 rating and 24V DC electronic coil. Designed for safety feedback circuits using mechanically linked mirror contacts.

Leviton 1202-2 delivers a durable, industrial double-pole toggle switch with quiet operation, silver alloy contacts, and 15A 120/277V performance for heavy-duty applications.