Search results for: 'powerlants'

Beckwith M-0193 Syncrocloser Unit delivers automatic generator-to-bus synchronization with adjustable voltage and frequency difference limits for controlled breaker closing in power system applications.

The Potter & Brumfield KHAU-17D11-24 is a general-purpose industrial plug-in relay with a 24 VDC coil and 4 Form C contact arrangement. Designed for socket mounting, it supports control and power switching applications requiring multiple changeover contacts.

Moore Industries RBX/3W80-160/4-20MA/12-42DC-EZ100[HP] resistance bulb transmitter with 3-wire RTD input, 4-20mA output, 12-42VDC loop power, and front Zero/Span adjustment.

Phoenix Contact 2832771-HW16 FL Switch SF 8TX delivers reliable 8-port 10/100 Mbps industrial Ethernet expansion with plug-and-play setup and DIN-rail mounting.

KATKO KU 380N load break switch delivers 3-pole isolation and switching up to 80A at 690V AC-22, supporting reliable control and disconnection of electrical loads in industrial power systems.

Allen-Bradley 100-C16D*10 motor contactor built for switching motor loads in industrial control systems, featuring a 110-120V AC coil, 3-pole power contacts, and 1 NO auxiliary contact for control circuit integration.

The ABB DSQC 504 Base Connector Unit is a passive I/O interface module used in ABB robot controller systems. It functions as a centralized backplane for connecting axis control modules, power supplies, safety wiring, and external I/O devices within S4, S4C, and S4C+ controller cabinets.

The Corcom NF21091-3 is a chassis-mount EMI line filter rated for 16 A at 250 VAC, 50/60 Hz. This metal-enclosed filter features clearly labeled LINE and LOAD terminals and is designed for installation in AC power input paths where conducted electrical noise reduction is required.

The Allen-Bradley 800B-N5W is a white LED lamp designed for use with Bulletin 800B 16 mm illuminated push-button and pilot light operators. Rated for 120V AC operation, this LED bulb provides consistent white illumination with low power consumption and extended service life in industrial control panel applications.

Emerson KJ3222X1-BK1 is a DeltaV S-Series analog input module with 8 channels for 4-20 mA HART signals. The module is identified on manufacturer documentation as AI 8 CH 4-20mA HART CARD.

Allen Bradley 100S-C09EJ32BC IEC safety contactor with 9A AC-3 rating and 24V DC electronic coil. Designed for safety feedback circuits using mechanically linked mirror contacts.

The General Electric CR104PLT43 is a 30.5mm push-to-test indicator light designed for 240V AC industrial automation systems. Part of the GE CR104P series, it utilizes a resistor power supply and supports machine-tool and control panel applications where manual lamp verification is required.

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

The Universal 827-SLH-TC-P is a magnetic instant-start fluorescent ballast designed to operate two slimline lamps on a 277V, 60 Hz power supply. It supports series lamp operation and is intended for replacement use in compatible commercial and industrial lighting fixtures.

Schneider Electric Telemecanique LC1D09 is a 3-pole AC contactor with a 120V 50/60Hz coil, rated 9 A in AC-3 applications, with integrated auxiliary contacts.

Hirschmann RS20-0800T1T1SDAEHH09.0.04 is an 8-port managed Fast Ethernet switch for DIN-rail networks, delivering store-and-forward switching, redundant power support, and Layer 2 Enhanced operation in a fanless industrial form factor.

Minebea NMB-MAT 4715KL-05T-B40 is a 24V DC axial cooling fan with 119 x 119 x 38.4 mm dimensions, 3200 RPM speed, and approximately 118 CFM airflow for industrial equipment cooling.

The Siemens 3TX4422-0A SIRIUS auxiliary contact block features 2NO + 2NC instantaneous contacts with screw-type terminals. Designed for use with contactor relays and power contactors according to EN 50011, it supports snap-on mounting, IP20 front protection, and positively driven operation per IEC 60947-5-1.

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

The Functional Devices RIB2401B is a 20 Amp SPDT power control relay with a continuous duty coil and multi-voltage input of 24 Vac/dc or 120 Vac, 50–60 Hz. Housed in a NEMA 1 enclosure accepted for plenum use, it includes a visible LED status indicator and 16-inch 600V rated lead wires. The relay supports general purpose, ballast, pilot duty, tungsten, and motor loads within its published ratings.

Schneider Electric RPM21BD relay offers reliable 24V DC DPDT switching for RPM-series control systems, with diode protection and compact plug-in design.

Amperite 115C60 thermal time delay relay delivers fixed 60-second Delay on Break control with 115V AC/DC input, SPST-NC contacts, and a 3A resistive rating.

Helwig Carbon H704 high-speed turbine carbon brush is built for turbo generator service, delivering low-friction electrical contact, balanced current distribution, and dependable performance at peripheral speeds up to 180 mph.

Phoenix Contact 2832771-HW15 FL Switch SF 8TX delivers reliable 8-port industrial Ethernet expansion with 10/100 Mbps speeds and DIN-rail mounting for automation networks.