Search results for: 'for it'

The Thermo Environmental 2200-0-010 Heater Control Module (P/N 22000010) is an industrial control board designed for regulated heater management within environmental and analytical systems. This module functions as a temperature control component in Thermo Environmental instrumentation platforms.

The Telemotive E7207-1 Circuit Board is an industrial automation component used in Telemotive radio control systems. Identified by part number E7207-1, this board is commonly applied in industrial control environments including crane and hoist remote control systems.

The Allen-Bradley 815-BOV4 is a manual reset overload relay designed for motor control applications. It provides thermal overload protection using a eutectic alloy mechanism and supports up to 27 A at 600 V AC. Suitable for use with Allen-Bradley motor control systems.

Allen-Bradley 194R-NN030P3 delivers reliable 30A non-fused power isolation for industrial panels, supporting safe lockout/tagout and rotary disconnect operation.

The Leviton T5015-E is a 15 amp, 125 volt tamper resistant single receptacle designed for commercial and high-use residential applications. It features a grounding configuration, impact-resistant construction, and side or back wiring options for installation flexibility.

The T.A. Systems EL-9060 is a sonic relay board module designed for industrial control applications operating on 24VDC. It is used to translate low-power control signals into higher-power switching actions within industrial automation and machinery control systems.

The Telemecanique XSAV32373 is an inductive proximity sensor designed for rotation monitoring applications. It features a cylindrical M30 nickel plated brass housing, 10 mm nominal sensing distance, PNP output with 1 NC function, and operates on 12 to 48 V DC. The sensor includes a fixed 2 meter cable connection and is rated IP67.

The Schrack ZG400615 is a used ice cube relay rated for 5 Amps and up to 600 Volts. It features a 14-pin plug-in design and a 115 VAC coil voltage, making it suitable for general industrial control and electrical switching applications where reliable electromechanical control is required.

The Sprecher + Schuh D5-3T12 is a transformer element for D5 series 22 mm pilot devices. It converts a 480 V control voltage to a 6 V output for powering an incandescent lamp, allowing low-voltage lamp operation in high-voltage industrial control panels.

The Siemens 3TF3000-0A is a 3-pole AC contactor from the 3TF30 series rated 9 A (AC-3 at 380/400 V) with insulation voltage up to 690 V. Designed for motor control applications at 50/60 Hz, it complies with IEC 947 and VDE 0660 standards.

The IDEC CS-10 ACSSO contact block is a cam switch component configured with one normally open contact and circuit designation C-2004. It is rated for 600 V insulation voltage and 10 A thermal current, utilizes silver contacts, and is designed for industrial control applications requiring reliable mechanical switching performance.

The ABB 1SVR430841R0200 CM-SRS.11 provides TRMS current monitoring with adjustable thresholds and multiple ranges, ideal for single-phase industrial control protection.

Eaton 6-22-2 restores performance in Citation Series Size 0 contactors with OEM 3-pole replacement contacts for reliable motor control and long-term durability.

General Electric 546A301G053 contact kit delivers 4-pole renewal capability for NEMA Size 1 magnetic contactors, supporting reliable electrical continuity and restoration of control equipment performance.

The Curtis Industries CUS8 is an 8-pin octal relay socket base designed for industrial control applications. Rated at 10A and up to 300V, it provides a standardized receptacle for compatible 2PDT octal relays or timers and supports secure screw-terminal wiring.

The Allen-Bradley 800FM-MT44 is a metal emergency stop push button operator with a 40 mm red mushroom actuator and twist-to-release operation. Designed for 22.5 mm panel mounting, this non-illuminated operator is part of the Bulletin 800FM metal series for industrial control applications.

The Tristar S0803-0000 is a compact 12V DC white LED indicator designed for 1/2" hole mounting. This polarity-sensitive LED draws approximately 0.02–0.03 amps and consumes about 0.25 watts. The unit features a 1/2" diameter body with a 1.75" housing length and is suitable for low-draw DC indicator applications.

The ABB DSQC 504 Base Connector Unit is a passive I/O interface module used in ABB robot controller systems. It functions as a centralized backplane for connecting axis control modules, power supplies, safety wiring, and external I/O devices within S4, S4C, and S4C+ controller cabinets.

The Telemotive E7150-1-B is a radio remote control receiver module used in industrial wireless control systems. It functions as the fixed receiving unit that interprets signals from a paired handheld transmitter to control machinery. The module operates as part of a Telemotive radio control system and includes diagnostic indicators for system monitoring and troubleshooting.

The Allen-Bradley 800B-N5W is a white LED lamp designed for use with Bulletin 800B 16 mm illuminated push-button and pilot light operators. Rated for 120V AC operation, this LED bulb provides consistent white illumination with low power consumption and extended service life in industrial control panel applications.

The Advance L-220-F is a magnetic reactor ballast designed to operate two 15W or 20W preheat fluorescent lamps at 120V AC, 60 Hz. It regulates lamp current using an inductive core and requires external starters for lamp ignition in preheat fluorescent systems.

The Allen-Bradley 800B-EAB is a 16 mm maintained square push button operator designed for light industrial and instrumentation applications. It features corrosion-proof plastic construction and gold-plated snap-action contact compatibility for reliable low-voltage switching when paired with Bulletin 800B contact blocks.