Search results for: 'ins'

General Electric CR2790E100A2 general purpose control relay with 115V AC 60Hz coil, 10A contact rating, and 300V max rating for industrial control and switching applications.

The Sprecher + Schuh D5-3T12 is a transformer element for D5 series 22 mm pilot devices. It converts a 480 V control voltage to a 6 V output for powering an incandescent lamp, allowing low-voltage lamp operation in high-voltage industrial control panels.

The Schrack ZG400615 is a used ice cube relay rated for 5 Amps and up to 600 Volts. It features a 14-pin plug-in design and a 115 VAC coil voltage, making it suitable for general industrial control and electrical switching applications where reliable electromechanical control is required.

SOR 101RN-KK45-M4-C1A differential pressure switch with 10-75 PSID adjustable range, RN weathertight aluminum housing, KK DPDT switching element, M4 diaphragm and O-ring system, and C1A 1/4 in NPT(F) pressure port.

Eaton Cutler-Hammer PC-GF20 switch protector guard helps shield 30.5 mm pushbutton and emergency-stop operators with reinforced PC-GF20 construction and metal washer support.

ZORO Select model 6UEE7 is an electric sequencer designed for HVAC and refrigeration systems. It operates on 24V AC control voltage and features two switches with adjustable on and off timing. Rated for up to 25A resistive load, it supports horizontal or vertical installation.

Eaton H1116/T1114 thermal overload heaters deliver reliable Class 20 motor protection for Citation Series and Freedom NEMA starters, ensuring safe, accurate trip performance.

Eaton XTCE012B10TD contactor delivers reliable 3-pole motor control with a 24V DC coil, 12A rating, and IEC compatibility for XT series motor starter systems.

Eaton 10250ED555-8 pushbutton delivers durable, oiltight control for 30.5 mm panels, offering reliable industrial operation and compatibility with Eaton 10250T components.

Eaton C25BNF220A delivers reliable 20A motor switching with a 120V coil, ideal for HVAC, refrigeration, pumps, and industrial control panels.

The Struthers-Dunn W88AHPX-36 is a hermetically sealed 3PDT plug-in relay from the 88HP Series, rated 10A and configured for 120VAC operation. It features an 11-pin octal base and a sealed gray metal enclosure designed to prevent contamination and corrosion.

The Universal 447-LR-TC-P is a 120V magnetic fluorescent ballast designed to operate two lamps in trigger-start configurations. It supports F20T12, F15T8, and F15T12 lamps and features a low power factor, lag-type circuit. UL and CSA certifications support indoor and Type 1 outdoor use.

The Hammond Power CRX06D1BC is a three-phase iron core line reactor rated for 600 VAC and 6.1 A. Part of the HPS Centurion® R Series, it provides controlled impedance to mitigate harmonics and electrical transients in AC drive systems operating at 50/60 Hz.

Yamatake Honeywell 8240-7444-001 ENH Relay Terminal Panel. This panel provides relay termination using multiple installed plug-in relays and numbered screw terminals on a single PCB assembly. Identified by manufacturer silkscreen and assembly number only.

The Phoenix Contact 560-3889 is a power distribution interface module used within Emerson Ovation distributed control systems. It functions as a marshalling and power distribution interface between controllers and I/O field devices, supporting structured wiring through screw terminal connections in PLC and DCS panels.

Sprecher + Schuh CS7E-31E control relay with attached CS7-PV auxiliary contact block. Rated for up to 690V AC, this 4-pole industrial control relay is used for switching control circuits in panel and machine control applications.

Beckwith M-0193 Syncrocloser Unit delivers automatic generator-to-bus synchronization with adjustable voltage and frequency difference limits for controlled breaker closing in power system applications.

The Weidmüller 1122-8800-00 TRZ 24VDC 1CO is a slim DIN rail relay interface module with a 24 V DC control voltage and one changeover (SPDT) contact. It supports up to 6 A switching current and uses tension-clamp connections for secure, screwless wiring in control cabinets.

Phoenix Contact 2832771-HW16 FL Switch SF 8TX delivers reliable 8-port 10/100 Mbps industrial Ethernet expansion with plug-and-play setup and DIN-rail mounting.

The MAC Valves PME-501CC is a solenoid pilot valve labeled 24 VDC and 6.0 watts. The valve body marking indicates a pressure range of 20–150 PSI. The unit includes an attached hardwired cable with flying leads.

The T.A. Systems EL-9060 is a sonic relay board module designed for industrial control applications operating on 24VDC. It is used to translate low-power control signals into higher-power switching actions within industrial automation and machinery control systems.

Allen-Bradley 100-C12ZA10 3-pole contactor brings IEC motor-control switching with a 220V DC coil, 1 NO auxiliary contact, and marked AC load ratings.

Forney 312 High Energy Spark Igniter delivers Class 3 direct spark ignition for oil or gas igniters and small burners with 12 joules per spark, 2000 VDC output, and approximately 3 sparks per second.