Search results for: 'rated stock'

Mitsubishi TH-T25KP thermal overload relay provides 3-element overload protection with a 1.7 A heater designation, 1.4–2 A setting range, and auxiliary NO/NC contacts for industrial motor control circuits.

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

R. STAHL INTRINSPAK 9001/02-093-030-10 safety barrier for industrial control and intrinsically safe interface applications, identified with 250V and 30 mA raw-data rating information.

The IDEC CS-10 ACSSO contact block is a cam switch component configured with one normally open contact and circuit designation C-2004. It is rated for 600 V insulation voltage and 10 A thermal current, utilizes silver contacts, and is designed for industrial control applications requiring reliable mechanical switching performance.

Allen-Bradley 193-T1AB48 bimetallic overload relay delivers adjustable 3.5-4.8 A motor overload protection with Class 10 tripping, phase-loss sensitivity, and manual or automatic reset for motor starter assemblies.

The Eaton E22HL3X4 is a 22.5 mm non-metallic heavy-duty assembled indicating light designed for panel mounting. It features a green LED operating at 24 VAC/VDC full voltage and uses a non-relampable cluster style construction. Rated for NEMA 3, 3R, 4, 4X, 12, and 13 environments.

ZORO Select model 6UEE7 is an electric sequencer designed for HVAC and refrigeration systems. It operates on 24V AC control voltage and features two switches with adjustable on and off timing. Rated for up to 25A resistive load, it supports horizontal or vertical installation.

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

The Allen-Bradley 800B-N5W is a white LED lamp designed for use with Bulletin 800B 16 mm illuminated push-button and pilot light operators. Rated for 120V AC operation, this LED bulb provides consistent white illumination with low power consumption and extended service life in industrial control panel applications.

Schneider Electric 750XCXH-120A is an 11-pin octal plug-in power relay with a 120 VAC coil and 3PDT contact form. Designed for general-purpose and hazardous-location applications, it features silver alloy, gold-flashed contacts and continuous-duty operation.

Eaton XTCE012B10TD contactor delivers reliable 3-pole motor control with a 24V DC coil, 12A rating, and IEC compatibility for XT series motor starter systems.

Hammond Power PH50MBMH industrial control transformer delivers 50 VA power conversion with multi-voltage primary and secondary configurations, supporting stable control circuit operation in machine tool and automation environments.

The Struthers-Dunn W88AHPX-36 is a hermetically sealed 3PDT plug-in relay from the 88HP Series, rated 10A and configured for 120VAC operation. It features an 11-pin octal base and a sealed gray metal enclosure designed to prevent contamination and corrosion.

The Omron MY4Z DC24(S) is a general-purpose miniature power relay with a 4PDT contact configuration and 24 VDC coil. Rated for 5 A switching in four-pole applications, it is designed for sequence control and power switching in industrial control systems.

The Allen-Bradley AK-R2-360P500 Dynamic Brake Resistor is an external medium-duty resistor kit designed for PowerFlex 70 and 700 series drives. It provides 360 ohms of resistance with an 86 watt continuous power rating to dissipate regenerative energy during motor braking.

The Siemens 3SU1400-1AA10-1BA0 is a SIRIUS ACT contact module with one normally open contact. It features screw terminals and a snap-on design for front plate mounting behind compatible actuators. Designed for industrial control and signaling applications requiring reliable signal switching.

The Allen-Bradley 815-BOV4 is a manual reset overload relay designed for motor control applications. It provides thermal overload protection using a eutectic alloy mechanism and supports up to 27 A at 600 V AC. Suitable for use with Allen-Bradley motor control systems.

Allen-Bradley 855T-B24DN3 delivers crisp green visual signaling in a 70 mm Control Tower stack light format with 24V AC/DC steady incandescent operation.

Amperite 115C60 thermal time delay relay delivers fixed 60-second Delay on Break control with 115V AC/DC input, SPST-NC contacts, and a 3A resistive rating.

The Mitsubishi SR-T5 AC100V 3A2B contactor relay is designed for control circuits requiring reliable auxiliary switching. It operates on a 100–127 VAC coil and provides 3 normally open and 2 normally closed contacts. The compact design supports DIN rail or screw mounting.

Allen-Bradley 194R-NJ030P3 fused rotary disconnect switch offers 30A, 600V isolation for industrial panels, supporting Class CC/J fuses and high-fault protection.

IPC 005-4240 power resistor delivers 110 ohm resistance with 800W heat dissipation for dynamic braking, load testing, and industrial energy control applications.

Allen-Bradley 100-C16D*10 motor contactor built for switching motor loads in industrial control systems, featuring a 110-120V AC coil, 3-pole power contacts, and 1 NO auxiliary contact for control circuit integration.

Leviton 1257-I delivers industrial-grade SPDT momentary switching for motors, screens, and disposals with durable construction and reliable 20A performance.