Search results for: 'Instade'

The Potter & Brumfield KHAU-17D11-24 is a general-purpose industrial plug-in relay with a 24 VDC coil and 4 Form C contact arrangement. Designed for socket mounting, it supports control and power switching applications requiring multiple changeover contacts.

The Allen-Bradley 800B-N5W is a white LED lamp designed for use with Bulletin 800B 16 mm illuminated push-button and pilot light operators. Rated for 120V AC operation, this LED bulb provides consistent white illumination with low power consumption and extended service life in industrial control panel applications.

The Fisher R3570CX0022 is a pneumatic valve positioner repair kit intended for maintenance of Fisher 3570 Series pneumatic valve positioners. This kit supports servicing of positioners used in industrial control valve assemblies and is not a complete valve or positioner.

The Hammond Power CRX06D1BC is a three-phase iron core line reactor rated for 600 VAC and 6.1 A. Part of the HPS Centurion® R Series, it provides controlled impedance to mitigate harmonics and electrical transients in AC drive systems operating at 50/60 Hz.

The Advance L-220-F is a magnetic reactor ballast designed to operate two 15W or 20W preheat fluorescent lamps at 120V AC, 60 Hz. It regulates lamp current using an inductive core and requires external starters for lamp ignition in preheat fluorescent systems.

The Siemens 3SU1400-1AA10-1BA0 is a SIRIUS ACT contact module with one normally open contact. It features screw terminals and a snap-on design for front plate mounting behind compatible actuators. Designed for industrial control and signaling applications requiring reliable signal switching.

The Honeywell HPK2-3 51401583-100 Enhanced Process Network Interface (EPNI) board is a core logic component used within Network Interface Modules in Honeywell TDC 3000 Distributed Control Systems. It supports data communication between control networks in industrial automation environments.

The Allen-Bradley 800T-XA2 Series D is a 30 mm industrial control contact block featuring two normally open contacts and an A600 NEMA pilot duty rating. Designed for use with Bulletin 800T operators, it provides screw-terminal connections and base-mount installation for industrial control panels.

Siemens 3RH1131-1AK60 contactor relay delivers 3NO+1NC switching in a compact SIRIUS S00 format with a 110V 50 Hz / 120V 60 Hz AC coil and screw-terminal connection for control circuit integration.

Omron MK3P5-S relay: Reliable 3PDT switching with mechanical indicator and test button for precise control in industrial applications.

Schneider Electric 9001KU7 is a clear silicone rubber push button boot for Harmony 9001K and 9001SK non-illuminated 30 mm push buttons.

The Siemens 75D73070C AC coil set of 2 offers clearly labeled 50/60 Hz voltage ranges and V/W terminal markings for starter and contactor replacement needs.

Siemens 771-8STF1 current-to-pneumatic (I/P) transducer converts a DC mA input to a proportional pneumatic output. Configuration: 4–20 mA input, 3–27 psig output, standard output capacity, terminal strip, intrinsically safe approval.

The GE DS200VPBLG1AFF is a VME P2 backplane board used in GE LS2100 and Load Commutated Inverter control systems. It provides centralized power and signal distribution across a 13-slot chassis, supporting DSPC, gate distribution, exciter, and I/O extender boards.

The Phoenix Contact RAD-OUT-8D-REL is an 8-channel digital relay output extension module for Radioline wireless systems. It provides floating relay contacts for reliable signal switching and supports DIN rail mounting in industrial automation environments.

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

SCHMERSAL SRB301LCI-24V: Reliable 24V safety controller relay with 3 safety contacts, signaling output, and advanced diagnostics for industrial protection.

Eaton XTCEXFAC20 auxiliary contactor supports control-panel auxiliary switching with two normally open contacts and visible AC/DC ratings.

Schneider Electric Telemecanique LC1 D09 10 is a 3-pole magnetic contactor for AC motor control and circuit switching, with an integrated 1 NO auxiliary contact and motor-starting capability up to 4 kW at 400V.

General Electric B4A82S1F1V1 Type SBM Switch delivers compact rotary cam control for industrial panels, combining panel-mounted operation, double-break contacts, and 600 VAC/VDC, 20 A continuous switching capability.