Search results for: 'goods stock'

Siemens 75D70550004 magnetic coil supports D.P. Model F contactor replacement with dual-voltage operation at 380–440V 50 Hz and 440–480V 60 Hz.

Allen-Bradley 193-BSB30 thermal overload relay delivers adjustable 2.0–3.0 A motor protection with Class 10 operation, manual or auto reset selection, and direct-mount Bulletin 193 form factor control.

Kanson Electronics 1010-1-J-2 off-delay timer relay delivers adjustable 0.5 to 50.0 second timing with 115V 50/60Hz operation and 10 amp output switching for industrial control circuits.

The Siemens 75D73070C AC coil set of 2 offers clearly labeled 50/60 Hz voltage ranges and V/W terminal markings for starter and contactor replacement needs.

Square D 2510KG1 manual switch delivers reliable 30A control for single-phase systems with a 2-pole toggle design and non-reversing operation in a compact NEMA 1 enclosure.

Hammond Power PH50MBMH industrial control transformer delivers 50 VA power conversion with multi-voltage primary and secondary configurations, supporting stable control circuit operation in machine tool and automation environments.

Moore Industries RBX/3W80-160/4-20MA/12-42DC-EZ100[HP] resistance bulb transmitter with 3-wire RTD input, 4-20mA output, 12-42VDC loop power, and front Zero/Span adjustment.

The Siemens 3TX4422-0A SIRIUS auxiliary contact block features 2NO + 2NC instantaneous contacts with screw-type terminals. Designed for use with contactor relays and power contactors according to EN 50011, it supports snap-on mounting, IP20 front protection, and positively driven operation per IEC 60947-5-1.

Siemens 771-8STF1 current-to-pneumatic (I/P) transducer converts a DC mA input to a proportional pneumatic output. Configuration: 4–20 mA input, 3–27 psig output, standard output capacity, terminal strip, intrinsically safe approval.

The General Electric CR104PLT43 is a 30.5mm push-to-test indicator light designed for 240V AC industrial automation systems. Part of the GE CR104P series, it utilizes a resistor power supply and supports machine-tool and control panel applications where manual lamp verification is required.

The Struthers-Dunn W88AHPX-36 is a hermetically sealed 3PDT plug-in relay from the 88HP Series, rated 10A and configured for 120VAC operation. It features an 11-pin octal base and a sealed gray metal enclosure designed to prevent contamination and corrosion.

The AEG SH 05.31 is a 4-pole auxiliary contactor from the SH 05 series with a 24V DC coil. It features a 3NO + 1NC contact configuration (31E) and screw terminals. Rated per AC-15 and DC-13 utilization categories as specified in the AEG 2014 extract catalogue.

Schneider Electric CAD50G7 is a TeSys Deca control relay with five normally open contacts and a 120 VAC 50/60 Hz control coil. Rated up to 690 VAC and 10 A, it supports DIN rail or panel mounting and is designed for industrial control circuit applications.

The Universal 447-LR-TC-P is a 120V magnetic fluorescent ballast designed to operate two lamps in trigger-start configurations. It supports F20T12, F15T8, and F15T12 lamps and features a low power factor, lag-type circuit. UL and CSA certifications support indoor and Type 1 outdoor use.

The Hammond Power CRX06D1BC is a three-phase iron core line reactor rated for 600 VAC and 6.1 A. Part of the HPS Centurion® R Series, it provides controlled impedance to mitigate harmonics and electrical transients in AC drive systems operating at 50/60 Hz.

The Omron MY4Z DC24(S) is a general-purpose miniature power relay with a 4PDT contact configuration and 24 VDC coil. Rated for 5 A switching in four-pole applications, it is designed for sequence control and power switching in industrial control systems.

The Allen-Bradley AK-R2-360P500 Dynamic Brake Resistor is an external medium-duty resistor kit designed for PowerFlex 70 and 700 series drives. It provides 360 ohms of resistance with an 86 watt continuous power rating to dissipate regenerative energy during motor braking.

The Siemens 3SU1400-1AA10-1BA0 is a SIRIUS ACT contact module with one normally open contact. It features screw terminals and a snap-on design for front plate mounting behind compatible actuators. Designed for industrial control and signaling applications requiring reliable signal switching.

The Edwards Signaling 48XBRMG120A is a green LED visual signal light designed for indoor and outdoor industrial applications. Operating on 120 VAC, this dual-mode beacon supports steady-on or flashing operation and is housed in a corrosion-resistant NEMA 4X enclosure.

The General Electric DS200DDTBG2ABB is an LCI Auxiliary I/O Terminal Board for GE Mark V Speedtronic gas and steam turbine control systems. It provides auxiliary signal termination, conditioning, and isolation for analog and digital I/O in high-voltage industrial control environments.

The GE DS200VPBLG1AFF is a VME P2 backplane board used in GE LS2100 and Load Commutated Inverter control systems. It provides centralized power and signal distribution across a 13-slot chassis, supporting DSPC, gate distribution, exciter, and I/O extender boards.

Yamatake Honeywell 8240-7444-001 ENH Relay Terminal Panel. This panel provides relay termination using multiple installed plug-in relays and numbered screw terminals on a single PCB assembly. Identified by manufacturer silkscreen and assembly number only.

The Phoenix Contact RAD-OUT-8D-REL is an 8-channel digital relay output extension module for Radioline wireless systems. It provides floating relay contacts for reliable signal switching and supports DIN rail mounting in industrial automation environments.