Search results for: 'control for'

Hubbell CS320I is a commercial-specification 3-way toggle switch rated 20A at 120/277V AC. It is side wired only, supports #14 to #10 AWG copper wire, and features an ivory nylon toggle with thermoplastic construction.

Square D 9001SKP1C9 delivers 30 mm pilot light signaling with a red domed plastic lens, incandescent BA 9s lamp, 110–120 V AC supply, and screw clamp terminals.

Schneider Electric 9001KU7 is a clear silicone rubber push button boot for Harmony 9001K and 9001SK non-illuminated 30 mm push buttons.

The Hammond Power CRX06D1BC is a three-phase iron core line reactor rated for 600 VAC and 6.1 A. Part of the HPS Centurion® R Series, it provides controlled impedance to mitigate harmonics and electrical transients in AC drive systems operating at 50/60 Hz.

Siemens 771-8STF1 current-to-pneumatic (I/P) transducer converts a DC mA input to a proportional pneumatic output. Configuration: 4–20 mA input, 3–27 psig output, standard output capacity, terminal strip, intrinsically safe approval.

The Siemens 3TF3000-0A is a 3-pole AC contactor from the 3TF30 series rated 9 A (AC-3 at 380/400 V) with insulation voltage up to 690 V. Designed for motor control applications at 50/60 Hz, it complies with IEC 947 and VDE 0660 standards.

The SSAC FS165-30T is a solid state beacon flasher designed for tower and obstruction lighting systems. Operating on 230VAC, it supports up to 5000W loads and provides an OFF-first flash sequence at 30 flashes per minute. Encapsulated construction supports demanding environments.

The Allen-Bradley 800B-PS11 is a 16 mm snap-action contact block with one normally open and one normally closed contact. Designed for Bulletin 800B push button and selector switch operators, it supports reliable low-voltage switching and compact panel installations in light industrial and instrumentation applications.

Wenglor UF88VCF-P24 photoelectric switch sensor supports non-contact object detection for industrial automation with DC operation, fast switching performance, and flexible sensing capability for demanding machine and control tasks.

The General Electric CR305X100E is a side-mounted auxiliary contact adder block providing one normally closed (1 NC) contact for GE 200- and 300-Line starters and contactors. It is designed for field installation onto a basic auxiliary contact block and is rated up to 600 VAC and 250 VDC.

The Allen-Bradley 700-HK32Z24 offers reliable DPDT switching in a slim 24V DC plug-in relay design, ideal for high-density control panels and industrial automation.

The IDEC CS-10 ACSSO contact block is a cam switch component configured with one normally open contact and circuit designation C-2004. It is rated for 600 V insulation voltage and 10 A thermal current, utilizes silver contacts, and is designed for industrial control applications requiring reliable mechanical switching performance.

Leviton 1202-2 delivers a durable, industrial double-pole toggle switch with quiet operation, silver alloy contacts, and 15A 120/277V performance for heavy-duty applications.

Eaton Cutler-Hammer SL7-BL120-R delivers high-visibility red LED signaling in a 70 mm stacklight format, operating on 120VAC for industrial status indication and machine signaling applications.

Moore Industries TIY/PRG/4-20MA/12-42DC [DIN] is a programmable isolated thermocouple transmitter that accepts common thermocouple types and millivolt inputs and delivers a linear 4-20mA output with front-panel ranging, display indication, and self-diagnostics.

The Siemens 75D73070C AC coil set of 2 offers clearly labeled 50/60 Hz voltage ranges and V/W terminal markings for starter and contactor replacement needs.

Allen-Bradley 194R-NJ030P3 fused rotary disconnect switch offers 30A, 600V isolation for industrial panels, supporting Class CC/J fuses and high-fault protection.

The Siemens 3TX4422-0A SIRIUS auxiliary contact block features 2NO + 2NC instantaneous contacts with screw-type terminals. Designed for use with contactor relays and power contactors according to EN 50011, it supports snap-on mounting, IP20 front protection, and positively driven operation per IEC 60947-5-1.

The Allen-Bradley AK-R2-360P500 Dynamic Brake Resistor is an external medium-duty resistor kit designed for PowerFlex 70 and 700 series drives. It provides 360 ohms of resistance with an 86 watt continuous power rating to dissipate regenerative energy during motor braking.

Moore Industries RBX/3W80-160/4-20MA/12-42DC-EZ100[HP] resistance bulb transmitter with 3-wire RTD input, 4-20mA output, 12-42VDC loop power, and front Zero/Span adjustment.

The AEG SH 05.31 is a 4-pole auxiliary contactor from the SH 05 series with a 24V DC coil. It features a 3NO + 1NC contact configuration (31E) and screw terminals. Rated per AC-15 and DC-13 utilization categories as specified in the AEG 2014 extract catalogue.

Hirschmann RS20-0800T1T1SDAEHH09.0.04 is an 8-port managed Fast Ethernet switch for DIN-rail networks, delivering store-and-forward switching, redundant power support, and Layer 2 Enhanced operation in a fanless industrial form factor.