Search results for: 'ins it's it'

The Contrex M-Drive 4E is a digital DC motor drive and motion controller designed for closed-loop speed regulation of permanent magnet DC motors up to 2 HP. It supports dual AC input voltage, selectable DC output, serial communication, and integrated operator interface.

SOR 101RN-KK45-M4-C1A differential pressure switch with 10-75 PSID adjustable range, RN weathertight aluminum housing, KK DPDT switching element, M4 diaphragm and O-ring system, and C1A 1/4 in NPT(F) pressure port.

Allen-Bradley 100-C12ZA10 3-pole contactor brings IEC motor-control switching with a 220V DC coil, 1 NO auxiliary contact, and marked AC load ratings.

Allen-Bradley 855T-B24DN3 delivers crisp green visual signaling in a 70 mm Control Tower stack light format with 24V AC/DC steady incandescent operation.

Mitsubishi TH-T25KP thermal overload relay provides 3-element overload protection with a 1.7 A heater designation, 1.4–2 A setting range, and auxiliary NO/NC contacts for industrial motor control circuits.

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

Kanson Electronics 1010-1-J-2 off-delay timer relay delivers adjustable 0.5 to 50.0 second timing with 115V 50/60Hz operation and 10 amp output switching for industrial control circuits.

The AEG SH 05.31 is a 4-pole auxiliary contactor from the SH 05 series with a 24V DC coil. It features a 3NO + 1NC contact configuration (31E) and screw terminals. Rated per AC-15 and DC-13 utilization categories as specified in the AEG 2014 extract catalogue.

Eaton D7PAB relay socket kit with installed D7PF3AA relay and MOD-AMV120 MOV module delivers panel or DIN rail mounting, screw clamping termination, and D7-series control integration in one compact assembly.

Phoenix Contact PLC-BSC-24DC/1/ACT relay base for PLC-INTERFACE output functions with screw connection, 24 V DC input, 1 N/O contact, and load return line connection.

Eaton C0200E2AFB delivers 200 VA industrial control transformer performance with multi-voltage primary input and 120/115/110 V secondary output for control circuit power.

Siemens SM-30 580-821670 Switch Module delivers two manually operated SPDT switches for fire alarm and control functions including signal silence, relay activation, disconnect, drill, override, and bypass control.

Allen Bradley 100S-C09EJ32BC IEC safety contactor with 9A AC-3 rating and 24V DC electronic coil. Designed for safety feedback circuits using mechanically linked mirror contacts.

Eaton DILEM-10 XTMC9A10B XT IEC mini contactor delivers 3-pole full-voltage non-reversing control with an 8.80A rating, 20A continuous rating, 220–240 Vac coil, 1 NO contact configuration, and screw terminals.

Allen-Bradley 100-C16D*10 motor contactor built for switching motor loads in industrial control systems, featuring a 110-120V AC coil, 3-pole power contacts, and 1 NO auxiliary contact for control circuit integration.

Allen-Bradley PHOTOSWITCH Series 9000 transmitted beam receiver sensor (42GRR-9003-QD, Series A) with 70–264V AC/DC operation, isolated N.O. solid-state (MOSFET) output, 4-pin AC Micro quick-disconnect, and IR 880 nm optics.

Allen-Bradley 100-C12D10 IEC magnetic contactor delivers reliable 12A motor control with 3-pole switching and integrated auxiliary contact, supporting 110V/120V coil operation for industrial control systems.

The General Electric CR305X100E is a side-mounted auxiliary contact adder block providing one normally closed (1 NC) contact for GE 200- and 300-Line starters and contactors. It is designed for field installation onto a basic auxiliary contact block and is rated up to 600 VAC and 250 VDC.

Emerson KJ3222X1-BK1 is a DeltaV S-Series analog input module with 8 channels for 4-20 mA HART signals. The module is identified on manufacturer documentation as AI 8 CH 4-20mA HART CARD.

GE 9T58K2874 industrial control transformer delivers 0.075 kVA single-phase control power with 120/240V primary and 12/24V secondary ratings for machine tool, industrial control, panelboard, and general-purpose applications.

Superior Electric SS50 SLO-SYN AC synchronous motor delivers fixed-speed synchronous operation for motion control systems with 120 VAC input, 72 RPM output, and documented SLO-SYN holding torque characteristics.

Siemens SIRIUS 3RT2035-1AK60 power contactor rated 41 A at AC-3 (400 V) with 18.5 kW operating power. 3-pole design with integrated 1 NO + 1 NC auxiliary contacts. Control supply voltage 110 V AC 50 Hz / 120 V AC 60 Hz. Screw-type terminals. Size S2 frame.

Eaton H1116/T1114 thermal overload heaters deliver reliable Class 20 motor protection for Citation Series and Freedom NEMA starters, ensuring safe, accurate trip performance.

Square D 9001SKP1C9 delivers 30 mm pilot light signaling with a red domed plastic lens, incandescent BA 9s lamp, 110–120 V AC supply, and screw clamp terminals.

Allen-Bradley 700-K40E-* Series B control relay brings compact 4-pole NO switching for industrial control circuits, with IEC-rated performance up to AC-12 690V 10A and clearly marked screw-terminal connectivity.