Search results for: 'control for'

The ABB 1SVR427014R0000 CP-S 24/5.0 is a 120 W DIN rail switch mode power supply delivering 24 V DC at 5 A. Designed for industrial environments, it supports wide AC and DC input ranges, adjustable output voltage, high efficiency, and integrated protection features for reliable system power.

Eaton Cutler-Hammer C320KGS1 is a Freedom Series side-mounted auxiliary contact block with 1NO contact configuration for NEMA sizes 00 to 2 and IEC sizes A to K.

Minebea NMB-MAT 4715KL-05T-B40 is a 24V DC axial cooling fan with 119 x 119 x 38.4 mm dimensions, 3200 RPM speed, and approximately 118 CFM airflow for industrial equipment cooling.

Phoenix Contact 2832771-HW15 FL Switch SF 8TX delivers reliable 8-port industrial Ethernet expansion with 10/100 Mbps speeds and DIN-rail mounting for automation networks.

Allen-Bradley 194R-NN030P3 delivers reliable 30A non-fused power isolation for industrial panels, supporting safe lockout/tagout and rotary disconnect operation.

The General Electric 8G163WF is a fluorescent lamp ballast labeled for 277-volt operation and F48CW lamp applications. This unit is identified directly from manufacturer carton labeling and is supplied as a single ballast. No additional accessories or documentation are included.

Fischer 333007 Pneumatic Preparation Unit provides organized pneumatic routing for Seal Air, Taper Air, Tool Eject, and Cylinder Vent circuits in industrial equipment setups.

Challenger C30-2 miscellaneous switch rated 30 amps, 2 poles, 240AC. UL listed unit with copper or aluminum wire compatibility and 60°C/75°C wire marking.

Telergon 400A DC Disconnect Switch: High-performance, 1500V power isolation for solar & industrial use. Reliable, durable, and built for safety!

The Eaton E22HL3X4 is a 22.5 mm non-metallic heavy-duty assembled indicating light designed for panel mounting. It features a green LED operating at 24 VAC/VDC full voltage and uses a non-relampable cluster style construction. Rated for NEMA 3, 3R, 4, 4X, 12, and 13 environments.

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

The HP A4978-62025 is an LCD and power switch subassembly mounted in a molded plastic bracket. The assembly integrates a monochrome LCD display and a front-panel power switch with a fixed ribbon cable terminating in a D-sub style connector. Identified by assembly label A4978-62025.

Siemens SITOP select diagnosis module 6EP1961-2BA00 for 24 V DC systems. 4-channel electronic module (4x 10 A) that distributes and monitors load current with adjustable trip thresholds from 2–10 A. Supports selective channel shutdown on overload/short circuit with common signaling contact.

The Phoenix Contact RAD-OUT-8D-REL is an 8-channel digital relay output extension module for Radioline wireless systems. It provides floating relay contacts for reliable signal switching and supports DIN rail mounting in industrial automation environments.

The Struthers-Dunn W88AHPX-36 is a hermetically sealed 3PDT plug-in relay from the 88HP Series, rated 10A and configured for 120VAC operation. It features an 11-pin octal base and a sealed gray metal enclosure designed to prevent contamination and corrosion.

Yamatake Honeywell 8240-7444-001 ENH Relay Terminal Panel. This panel provides relay termination using multiple installed plug-in relays and numbered screw terminals on a single PCB assembly. Identified by manufacturer silkscreen and assembly number only.

Tsubakimoto TSB50 Shock Relay provides reliable motor overload protection with adjustable load settings for OEM systems. Ideal for AC motors up to 16A.

Eaton FH80 overload relay heater element provides reliable thermal motor protection for A200/B100 starters, supporting accurate overload trip performance.

The Leviton T5015-E is a 15 amp, 125 volt tamper resistant single receptacle designed for commercial and high-use residential applications. It features a grounding configuration, impact-resistant construction, and side or back wiring options for installation flexibility.

The Corcom NF21091-3 is a chassis-mount EMI line filter rated for 16 A at 250 VAC, 50/60 Hz. This metal-enclosed filter features clearly labeled LINE and LOAD terminals and is designed for installation in AC power input paths where conducted electrical noise reduction is required.

The Fireye 4-314-1 is an ultraviolet sensing tube used in Fireye flame scanner assemblies. This tube is supplied as a standalone replacement component and is identified on the original manufacturer carton for use with select 45UV series scanners. No scanner body or accessories are included.