Search results for: 'Theia'

Eaton H1116/T1114 thermal overload heaters deliver reliable Class 20 motor protection for Citation Series and Freedom NEMA starters, ensuring safe, accurate trip performance.

Kanson Electronics 1010-1-J-2 off-delay timer relay delivers adjustable 0.5 to 50.0 second timing with 115V 50/60Hz operation and 10 amp output switching for industrial control circuits.

Square D 9999 LL0 is a lug-lug kit for Type S contactor and starter configurations, supporting NEMA sizes 00, 0, and 1 in Class 9999 Type LL0 applications.

The MAC Valves PME-501CC is a solenoid pilot valve labeled 24 VDC and 6.0 watts. The valve body marking indicates a pressure range of 20–150 PSI. The unit includes an attached hardwired cable with flying leads.

The Tristar S0803-0000 is a compact 12V DC white LED indicator designed for 1/2" hole mounting. This polarity-sensitive LED draws approximately 0.02–0.03 amps and consumes about 0.25 watts. The unit features a 1/2" diameter body with a 1.75" housing length and is suitable for low-draw DC indicator applications.

Allen-Bradley 193-BSB30 thermal overload relay delivers adjustable 2.0–3.0 A motor protection with Class 10 operation, manual or auto reset selection, and direct-mount Bulletin 193 form factor control.

Emerson Ovation 1C31219G01 Relay Output Electronics Module for interfacing between the Ovation controller and mechanical relays in a relay output assembly.

Mitsubishi TH-T25KP thermal overload relay provides 3-element overload protection with a 1.7 A heater designation, 1.4–2 A setting range, and auxiliary NO/NC contacts for industrial motor control circuits.

The AEG SH 05.31 is a 4-pole auxiliary contactor from the SH 05 series with a 24V DC coil. It features a 3NO + 1NC contact configuration (31E) and screw terminals. Rated per AC-15 and DC-13 utilization categories as specified in the AEG 2014 extract catalogue.

The Eaton P1-25/V/SVB is a 25 A, three-pole main switch from the Eaton Moeller® P1 series designed for rear mounting applications. It features a door-coupling rotary drive with a red rotary handle and yellow locking ring, and supports emergency switching off functionality. The switch is rated up to 690 V AC, provides IP65 front protection, and is lockable in the 0 (Off) position for secured isolation.

The Siemens 3TF3000-0A is a 3-pole AC contactor from the 3TF30 series rated 9 A (AC-3 at 380/400 V) with insulation voltage up to 690 V. Designed for motor control applications at 50/60 Hz, it complies with IEC 947 and VDE 0660 standards.

Johnson Controls Metasys ORL101 Output Relay Module: Reliable control for field devices. Features magnetic latching relay, HOA switch, and durable 120VAC performance.

The REXA Koso S96111 Pulse Mod I/O Interface PCB Board is an internal electronic module used in REXA Electraulic™ actuators. It supports pulse modulation control and manages input and output signals within the actuator’s control system for precise positioning and communication.

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

The Siemens 3SU1400-1AA10-1BA0 is a SIRIUS ACT contact module with one normally open contact. It features screw terminals and a snap-on design for front plate mounting behind compatible actuators. Designed for industrial control and signaling applications requiring reliable signal switching.

The Honeywell HPK2-3 51401583-100 Enhanced Process Network Interface (EPNI) board is a core logic component used within Network Interface Modules in Honeywell TDC 3000 Distributed Control Systems. It supports data communication between control networks in industrial automation environments.

Emerson Ovation 1C31189G31 Speed Detector Module for the Ovation DCS. This module monitors rotating equipment speed and converts sensor input into digital data for real-time control, monitoring, and diagnostics.

Allen-Bradley 100-DS1-20 auxiliary contact block expands control contacts on 100-D contactors, delivering status signaling for industrial motor control.

Superior Electric SS50 SLO-SYN AC synchronous motor delivers fixed-speed synchronous operation for motion control systems with 120 VAC input, 72 RPM output, and documented SLO-SYN holding torque characteristics.