Search results for: 'allowing'

The Sprecher + Schuh D5-3T12 is a transformer element for D5 series 22 mm pilot devices. It converts a 480 V control voltage to a 6 V output for powering an incandescent lamp, allowing low-voltage lamp operation in high-voltage industrial control panels.

The Corcom NF21091-3 is a chassis-mount EMI line filter rated for 16 A at 250 VAC, 50/60 Hz. This metal-enclosed filter features clearly labeled LINE and LOAD terminals and is designed for installation in AC power input paths where conducted electrical noise reduction is required.

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

The Potter & Brumfield KUP14D15 is an enclosed electromechanical control relay with a 12 VDC coil and a 3PDT (3 Form C) contact configuration. This relay features an 11-pin blade terminal base and a clear polycarbonate dust cover for component visibility.

Schneider Electric RPM21BD relay offers reliable 24V DC DPDT switching for RPM-series control systems, with diode protection and compact plug-in design.

The Allen-Bradley 700-HK32Z24 offers reliable DPDT switching in a slim 24V DC plug-in relay design, ideal for high-density control panels and industrial automation.

Allen-Bradley 100-DS1-20 auxiliary contact block expands control contacts on 100-D contactors, delivering status signaling for industrial motor control.

Johnson Controls Metasys ORL101 Output Relay Module: Reliable control for field devices. Features magnetic latching relay, HOA switch, and durable 120VAC performance.

Eaton C25BNF220A delivers reliable 20A motor switching with a 120V coil, ideal for HVAC, refrigeration, pumps, and industrial control panels.

Allen-Bradley 700-C1 rear deck contact cartridge delivers reliable switching functionality for Bulletin 700 relay systems, supporting consistent electrical contact operation in control circuit configurations.

Hubbell HC69476733 industrial resistor assembly delivers controlled resistive load handling for power dissipation and current regulation in industrial electrical systems.

Fischer 333007 Pneumatic Preparation Unit provides organized pneumatic routing for Seal Air, Taper Air, Tool Eject, and Cylinder Vent circuits in industrial equipment setups.

Champion TSW-12A-2P Power Switch Box delivers reliable dual AC power switching in a compact enclosure designed for controlled electrical distribution and system integration.

Johnson Controls P10BC-7C low pressure control, SPDT, 1-stage, 3 to 20 psi range, 12 psig factory setting, 2 psi switch differential, with barbed fitting.

The Allen-Bradley 800B-N5W is a white LED lamp designed for use with Bulletin 800B 16 mm illuminated push-button and pilot light operators. Rated for 120V AC operation, this LED bulb provides consistent white illumination with low power consumption and extended service life in industrial control panel applications.

Allen-Bradley 193-BSB30 thermal overload relay delivers adjustable 2.0–3.0 A motor protection with Class 10 operation, manual or auto reset selection, and direct-mount Bulletin 193 form factor control.

The Square D 8501NR61 is an 11-pin plug-in relay socket designed for use with compatible Square D relays and timers. It features single-tier screw clamp terminals and supports both panel and DIN rail mounting for industrial control applications.

The Allen-Bradley 800T-XA2 Series D is a 30 mm industrial control contact block featuring two normally open contacts and an A600 NEMA pilot duty rating. Designed for use with Bulletin 800T operators, it provides screw-terminal connections and base-mount installation for industrial control panels.

Allen-Bradley 100-C16D*10 motor contactor built for switching motor loads in industrial control systems, featuring a 110-120V AC coil, 3-pole power contacts, and 1 NO auxiliary contact for control circuit integration.

Leviton 1257-I delivers industrial-grade SPDT momentary switching for motors, screens, and disposals with durable construction and reliable 20A performance.

The Phoenix Contact RAD-OUT-4A-I is a compact analog extension module providing four independent 4–20 mA current outputs. Designed for DIN rail mounting, it operates from a 9–30 V DC supply via a bus foot connector and supports screw terminal wiring. The module is UL listed for Class I, Division 2 hazardous locations and CE compliant.

Eaton 9575H3A000 relay offers reliable DPDT switching for industrial control systems, featuring a 110/120V coil and heavy-duty performance for diverse AC/DC loads.

Eaton FA20 auxiliary contact block adds 2NO contacts to XTMCX contactors and XTRM relays, offering reliable control signaling and easy front-mount installation.