Search results for: 'connected'

Marel MWS 4 Weight Control Module for industrial weighing systems, with CAN network labeling, dual RS232 ports, multiple sensor terminals, and four load cell connections in a compact panel-mount format.

Turck MK91-12-R/115VAC is a 1-channel level controller for electrode-based level monitoring with 115VAC supply, relay output switching, and adjustable operating settings for control tasks.

Lithonia Lighting 563-252 delivers NEMA twist-lock photo control functionality for compatible TF, TFH, TFD, TFG, or TFL fixtures equipped with a PER receptacle.

OMRON PTF11PC 11-pin relay socket lot with 10A rating and screw-terminal wiring layout, ready for relay socket replacement, panel support, or control component stocking.

R. STAHL INTRINSPAK 9001/02-093-030-10 safety barrier for industrial control and intrinsically safe interface applications, identified with 250V and 30 mA raw-data rating information.

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

Siemens POL906.00/MCQ Communication Module supports POL6xx-connected control architecture in a compact modular format, with visible LON-SCC identification plus on-product IP20, -40 to 70, 80 mA, and 0.4 W markings.

The Phoenix Contact 560-3889 is a power distribution interface module used within Emerson Ovation distributed control systems. It functions as a marshalling and power distribution interface between controllers and I/O field devices, supporting structured wiring through screw terminal connections in PLC and DCS panels.

Square D 2510KG1 manual switch delivers reliable 30A control for single-phase systems with a 2-pole toggle design and non-reversing operation in a compact NEMA 1 enclosure.

The General Electric DS200DDTBG2ABB is an LCI Auxiliary I/O Terminal Board for GE Mark V Speedtronic gas and steam turbine control systems. It provides auxiliary signal termination, conditioning, and isolation for analog and digital I/O in high-voltage industrial control environments.

KATKO KU 380N load break switch delivers 3-pole isolation and switching up to 80A at 690V AC-22, supporting reliable control and disconnection of electrical loads in industrial power systems.

Allen-Bradley 100-C16D*10 motor contactor built for switching motor loads in industrial control systems, featuring a 110-120V AC coil, 3-pole power contacts, and 1 NO auxiliary contact for control circuit integration.

Allen-Bradley 193-T1AB48 bimetallic overload relay delivers adjustable 3.5-4.8 A motor overload protection with Class 10 tripping, phase-loss sensitivity, and manual or automatic reset for motor starter assemblies.

Eaton H1116/T1114 thermal overload heaters deliver reliable Class 20 motor protection for Citation Series and Freedom NEMA starters, ensuring safe, accurate trip performance.

Hirschmann RS20-0800T1T1SDAEHH09.0.04 is an 8-port managed Fast Ethernet switch for DIN-rail networks, delivering store-and-forward switching, redundant power support, and Layer 2 Enhanced operation in a fanless industrial form factor.

Allen-Bradley 700-HN126 Relay Socket supports relay base connection with screw terminals, 10A 300V rating, and visible UL Recognized, CE, and CSA markings.

The ABB DSQC 504 Base Connector Unit is a passive I/O interface module used in ABB robot controller systems. It functions as a centralized backplane for connecting axis control modules, power supplies, safety wiring, and external I/O devices within S4, S4C, and S4C+ controller cabinets.

Fischer 333007 Pneumatic Preparation Unit provides organized pneumatic routing for Seal Air, Taper Air, Tool Eject, and Cylinder Vent circuits in industrial equipment setups.

Phoenix Contact PLC-BSC-24DC/1/ACT relay base for PLC-INTERFACE output functions with screw connection, 24 V DC input, 1 N/O contact, and load return line connection.

Square D 9999 LL0 is a lug-lug kit for Type S contactor and starter configurations, supporting NEMA sizes 00, 0, and 1 in Class 9999 Type LL0 applications.

The Weidmüller 1122-8800-00 TRZ 24VDC 1CO is a slim DIN rail relay interface module with a 24 V DC control voltage and one changeover (SPDT) contact. It supports up to 6 A switching current and uses tension-clamp connections for secure, screwless wiring in control cabinets.

GE 9T58K2874 industrial control transformer delivers 0.075 kVA single-phase control power with 120/240V primary and 12/24V secondary ratings for machine tool, industrial control, panelboard, and general-purpose applications.

Champion TSW-12A-2P Power Switch Box delivers reliable dual AC power switching in a compact enclosure designed for controlled electrical distribution and system integration.

The Corcom NF21091-3 is a chassis-mount EMI line filter rated for 16 A at 250 VAC, 50/60 Hz. This metal-enclosed filter features clearly labeled LINE and LOAD terminals and is designed for installation in AC power input paths where conducted electrical noise reduction is required.