Search results for: 'connections 20'

Moore Industries RBX/3W80-160/4-20MA/12-42DC-EZ100[HP] resistance bulb transmitter with 3-wire RTD input, 4-20mA output, 12-42VDC loop power, and front Zero/Span adjustment.

The Phoenix Contact RAD-OUT-4A-I is a compact analog extension module providing four independent 4–20 mA current outputs. Designed for DIN rail mounting, it operates from a 9–30 V DC supply via a bus foot connector and supports screw terminal wiring. The module is UL listed for Class I, Division 2 hazardous locations and CE compliant.

Siemens 771-8STF1 current-to-pneumatic (I/P) transducer converts a DC mA input to a proportional pneumatic output. Configuration: 4–20 mA input, 3–27 psig output, standard output capacity, terminal strip, intrinsically safe approval.

The Weidmüller 1122-8800-00 TRZ 24VDC 1CO is a slim DIN rail relay interface module with a 24 V DC control voltage and one changeover (SPDT) contact. It supports up to 6 A switching current and uses tension-clamp connections for secure, screwless wiring in control cabinets.

The Phoenix Contact 560-3889 is a power distribution interface module used within Emerson Ovation distributed control systems. It functions as a marshalling and power distribution interface between controllers and I/O field devices, supporting structured wiring through screw terminal connections in PLC and DCS panels.

Eaton DILEM-10 mini contactor delivers 8.80A switching, three-pole FVNR control, 1NO contact configuration, and 110–120 Vac coil operation in a compact IEC frame.

Hirschmann RS20-0800T1T1SDAEHH09.0.04 is an 8-port managed Fast Ethernet switch for DIN-rail networks, delivering store-and-forward switching, redundant power support, and Layer 2 Enhanced operation in a fanless industrial form factor.

Schneider Electric Telemecanique LC1 D09 10 is a 3-pole magnetic contactor for AC motor control and circuit switching, with an integrated 1 NO auxiliary contact and motor-starting capability up to 4 kW at 400V.

Allen-Bradley 100-C16D*10 motor contactor built for switching motor loads in industrial control systems, featuring a 110-120V AC coil, 3-pole power contacts, and 1 NO auxiliary contact for control circuit integration.

Eaton D7PAB relay socket kit with installed D7PF3AA relay and MOD-AMV120 MOV module delivers panel or DIN rail mounting, screw clamping termination, and D7-series control integration in one compact assembly.

Marel MWS 4 Weight Control Module for industrial weighing systems, with CAN network labeling, dual RS232 ports, multiple sensor terminals, and four load cell connections in a compact panel-mount format.

Eaton DILM9-10 / XTCE009B10T 24V 50/60Hz 3-pole motor contactor with 9A AC-3 rating, 4 kW capacity, 1NO auxiliary contact, and screw terminals for dependable control of pumps, fans, conveyors, and OEM panels.

GE 9T58K2874 industrial control transformer delivers 0.075 kVA single-phase control power with 120/240V primary and 12/24V secondary ratings for machine tool, industrial control, panelboard, and general-purpose applications.

Eaton XTCEXFAC20 auxiliary contactor supports control-panel auxiliary switching with two normally open contacts and visible AC/DC ratings.

GF Signet 3-8512 flow transmitter converts compatible sensor frequency input to a 4-20 mA process signal for flow monitoring and control. Local display and keypad are built into the unit.

The MAC Valves PME-501CC is a solenoid pilot valve labeled 24 VDC and 6.0 watts. The valve body marking indicates a pressure range of 20–150 PSI. The unit includes an attached hardwired cable with flying leads.

Eaton C25BNF220A delivers reliable 20A motor switching with a 120V coil, ideal for HVAC, refrigeration, pumps, and industrial control panels.

Johnson Controls P10BC-7C low pressure control, SPDT, 1-stage, 3 to 20 psi range, 12 psig factory setting, 2 psi switch differential, with barbed fitting.

Eaton H1116/T1114 thermal overload heaters deliver reliable Class 20 motor protection for Citation Series and Freedom NEMA starters, ensuring safe, accurate trip performance.

The ABB 1SVR430841R0200 CM-SRS.11 provides TRMS current monitoring with adjustable thresholds and multiple ranges, ideal for single-phase industrial control protection.

Siemens POL906.00/MCQ Communication Module supports POL6xx-connected control architecture in a compact modular format, with visible LON-SCC identification plus on-product IP20, -40 to 70, 80 mA, and 0.4 W markings.

The General Electric DS200DDTBG2ABB is an LCI Auxiliary I/O Terminal Board for GE Mark V Speedtronic gas and steam turbine control systems. It provides auxiliary signal termination, conditioning, and isolation for analog and digital I/O in high-voltage industrial control environments.

Eaton DILEM-10 XTMC9A10B XT IEC mini contactor delivers 3-pole full-voltage non-reversing control with an 8.80A rating, 20A continuous rating, 220–240 Vac coil, 1 NO contact configuration, and screw terminals.

Siemens SITOP select diagnosis module 6EP1961-2BA00 for 24 V DC systems. 4-channel electronic module (4x 10 A) that distributes and monitors load current with adjustable trip thresholds from 2–10 A. Supports selective channel shutdown on overload/short circuit with common signaling contact.