Search results for: 'kaiop'

The ABB 1SVR427014R0000 CP-S 24/5.0 is a 120 W DIN rail switch mode power supply delivering 24 V DC at 5 A. Designed for industrial environments, it supports wide AC and DC input ranges, adjustable output voltage, high efficiency, and integrated protection features for reliable system power.

The Potter & Brumfield KUP14D15 is an enclosed electromechanical control relay with a 12 VDC coil and a 3PDT (3 Form C) contact configuration. This relay features an 11-pin blade terminal base and a clear polycarbonate dust cover for component visibility.

Mitsubishi TH-T25KP thermal overload relay provides 3-element overload protection with a 1.7 A heater designation, 1.4–2 A setting range, and auxiliary NO/NC contacts for industrial motor control circuits.

Forney 312 High Energy Spark Igniter delivers Class 3 direct spark ignition for oil or gas igniters and small burners with 12 joules per spark, 2000 VDC output, and approximately 3 sparks per second.

Johnson Controls P10BC-7C low pressure control, SPDT, 1-stage, 3 to 20 psi range, 12 psig factory setting, 2 psi switch differential, with barbed fitting.

The MAC Valves PME-501CC is a solenoid pilot valve labeled 24 VDC and 6.0 watts. The valve body marking indicates a pressure range of 20–150 PSI. The unit includes an attached hardwired cable with flying leads.

The Telemotive E7160-101 Radio Remote Control Receiver Module is a board-level component used within compatible Telemotive industrial radio control receiver assemblies. It functions as a receiver module in fixed-station radio control systems for industrial equipment integration.

Phoenix Contact 5604123 is a VARIOFACE passive module providing 16-channel fused output for structured signal interfacing between control systems and field wiring.

Westinghouse 1C31129G32 Ovation analog output module with 0-10V analog output labeling. Industrial control module for Ovation system applications. Module only.

The T.A. Systems EL-9060 is a sonic relay board module designed for industrial control applications operating on 24VDC. It is used to translate low-power control signals into higher-power switching actions within industrial automation and machinery control systems.

The Fireye 4-314-1 is an ultraviolet sensing tube used in Fireye flame scanner assemblies. This tube is supplied as a standalone replacement component and is identified on the original manufacturer carton for use with select 45UV series scanners. No scanner body or accessories are included.

Challenger C30-2 miscellaneous switch rated 30 amps, 2 poles, 240AC. UL listed unit with copper or aluminum wire compatibility and 60°C/75°C wire marking.

The ABB DSQC 504 Base Connector Unit is a passive I/O interface module used in ABB robot controller systems. It functions as a centralized backplane for connecting axis control modules, power supplies, safety wiring, and external I/O devices within S4, S4C, and S4C+ controller cabinets.

The Telemotive E7150-1-B is a radio remote control receiver module used in industrial wireless control systems. It functions as the fixed receiving unit that interprets signals from a paired handheld transmitter to control machinery. The module operates as part of a Telemotive radio control system and includes diagnostic indicators for system monitoring and troubleshooting.

The Schrack ZG400615 is a used ice cube relay rated for 5 Amps and up to 600 Volts. It features a 14-pin plug-in design and a 115 VAC coil voltage, making it suitable for general industrial control and electrical switching applications where reliable electromechanical control is required.

The Corcom NF21091-3 is a chassis-mount EMI line filter rated for 16 A at 250 VAC, 50/60 Hz. This metal-enclosed filter features clearly labeled LINE and LOAD terminals and is designed for installation in AC power input paths where conducted electrical noise reduction is required.

The ATC TDH-120-ALA-100 is a delayed interval time delay relay designed for industrial control applications. It operates on 120 VAC/DC supply voltage and provides an adjustable delay range from 1 to 100 seconds using dual front-mounted dials. The relay features a plug-in octal base and relay contacts rated at 10A.

GF Signet 3-8512 flow transmitter converts compatible sensor frequency input to a 4-20 mA process signal for flow monitoring and control. Local display and keypad are built into the unit.

The Potter & Brumfield KHAU-17D11-24 is a general-purpose industrial plug-in relay with a 24 VDC coil and 4 Form C contact arrangement. Designed for socket mounting, it supports control and power switching applications requiring multiple changeover contacts.

The Allen-Bradley 800T-Q10R is a 30mm red pilot light with a full-voltage incandescent lamp rated for 120V AC/DC. Designed for industrial control panels, it features a metal operator construction, screw terminal connections, and compatibility with NEMA Type 1, 4, 12, and 13 enclosures.

Emerson KJ3222X1-BK1 is a DeltaV S-Series analog input module with 8 channels for 4-20 mA HART signals. The module is identified on manufacturer documentation as AI 8 CH 4-20mA HART CARD.

Eaton DILEM-10 mini contactor delivers 8.80A switching, three-pole FVNR control, 1NO contact configuration, and 110–120 Vac coil operation in a compact IEC frame.

Siemens POL906.00/MCQ Communication Module supports POL6xx-connected control architecture in a compact modular format, with visible LON-SCC identification plus on-product IP20, -40 to 70, 80 mA, and 0.4 W markings.

Square D 9065SS110 Motor Logic solid-state overload relay delivers adjustable 9-27A motor overload protection in a 600VAC Class 10 design sized for NEMA Size 1 control applications.

Turck MK91-12-R/115VAC is a 1-channel level controller for electrode-based level monitoring with 115VAC supply, relay output switching, and adjustable operating settings for control tasks.