Search results for: 'the the'

Kanson Electronics 1010-1-J-2 off-delay timer relay delivers adjustable 0.5 to 50.0 second timing with 115V 50/60Hz operation and 10 amp output switching for industrial control circuits.

The MAC Valves PME-501CC is a solenoid pilot valve labeled 24 VDC and 6.0 watts. The valve body marking indicates a pressure range of 20–150 PSI. The unit includes an attached hardwired cable with flying leads.

The AEG SH 05.31 is a 4-pole auxiliary contactor from the SH 05 series with a 24V DC coil. It features a 3NO + 1NC contact configuration (31E) and screw terminals. Rated per AC-15 and DC-13 utilization categories as specified in the AEG 2014 extract catalogue.

The REXA Koso S96111 Pulse Mod I/O Interface PCB Board is an internal electronic module used in REXA Electraulic™ actuators. It supports pulse modulation control and manages input and output signals within the actuator’s control system for precise positioning and communication.

Emerson Ovation 1C31219G01 Relay Output Electronics Module for interfacing between the Ovation controller and mechanical relays in a relay output assembly.

Allen-Bradley 100-DS1-20 auxiliary contact block expands control contacts on 100-D contactors, delivering status signaling for industrial motor control.

The Eaton P1-25/V/SVB is a 25 A, three-pole main switch from the Eaton Moeller® P1 series designed for rear mounting applications. It features a door-coupling rotary drive with a red rotary handle and yellow locking ring, and supports emergency switching off functionality. The switch is rated up to 690 V AC, provides IP65 front protection, and is lockable in the 0 (Off) position for secured isolation.

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

The IDEC APW299D-W-120V is a panel-mount white pilot light indicator designed for industrial control applications. This unit operates on 120V AC and features a dome-style white lens with a metallic bezel. It is UL listed and CSA marked, with screw terminal connections housed in a compact rectangular base.

Yamatake Honeywell 8240-7444-001 ENH Relay Terminal Panel. This panel provides relay termination using multiple installed plug-in relays and numbered screw terminals on a single PCB assembly. Identified by manufacturer silkscreen and assembly number only.

The Allen-Bradley 800T-XA2 Series D is a 30 mm industrial control contact block featuring two normally open contacts and an A600 NEMA pilot duty rating. Designed for use with Bulletin 800T operators, it provides screw-terminal connections and base-mount installation for industrial control panels.

The Telemotive E7150-1-B is a radio remote control receiver module used in industrial wireless control systems. It functions as the fixed receiving unit that interprets signals from a paired handheld transmitter to control machinery. The module operates as part of a Telemotive radio control system and includes diagnostic indicators for system monitoring and troubleshooting.

The Crouzet PJR 110A P4700 is a plug-in alternator control relay operating on a 110 VAC supply. The module provides SPDT relay output rated at 10 A and is housed in a compact rectangular enclosure with front position indicators. Used in control and protection circuits where monitored voltage conditions determine relay actuation.

The HP A4978-62025 is an LCD and power switch subassembly mounted in a molded plastic bracket. The assembly integrates a monochrome LCD display and a front-panel power switch with a fixed ribbon cable terminating in a D-sub style connector. Identified by assembly label A4978-62025.

SOR 4N3-KK4-N1-C1A-ZZ pressure switch delivers adjustable 2-25 PSI switching for industrial pressure control, with 750 PSI over range and 1000 PSI proof pressure for monitored process applications.

Sprecher + Schuh CS7E-31E control relay with attached CS7-PV auxiliary contact block. Rated for up to 690V AC, this 4-pole industrial control relay is used for switching control circuits in panel and machine control applications.

Eaton C0200E2AFB delivers 200 VA industrial control transformer performance with multi-voltage primary input and 120/115/110 V secondary output for control circuit power.

The General Electric CR104PLT43 is a 30.5mm push-to-test indicator light designed for 240V AC industrial automation systems. Part of the GE CR104P series, it utilizes a resistor power supply and supports machine-tool and control panel applications where manual lamp verification is required.

The General Electric DS200DDTBG2ABB is an LCI Auxiliary I/O Terminal Board for GE Mark V Speedtronic gas and steam turbine control systems. It provides auxiliary signal termination, conditioning, and isolation for analog and digital I/O in high-voltage industrial control environments.

Eaton FH80 overload relay heater element provides reliable thermal motor protection for A200/B100 starters, supporting accurate overload trip performance.

The ATC TDH-120-ALA-100 is a delayed interval time delay relay designed for industrial control applications. It operates on 120 VAC/DC supply voltage and provides an adjustable delay range from 1 to 100 seconds using dual front-mounted dials. The relay features a plug-in octal base and relay contacts rated at 10A.