Search results for: 'vac kiep'

GAI-Tronics 7335-001 is a 5 party line weatherproof non-metallic enclosure built for analog Page/Party intercom systems, combining NEMA 4X outdoor protection, 120 VAC input, and reinforced polyester fiberglass construction for demanding installations.

Turck MK91-12-R/115VAC is a 1-channel level controller for electrode-based level monitoring with 115VAC supply, relay output switching, and adjustable operating settings for control tasks.

The ATC TDH-120-ALA-100 is a delayed interval time delay relay designed for industrial control applications. It operates on 120 VAC/DC supply voltage and provides an adjustable delay range from 1 to 100 seconds using dual front-mounted dials. The relay features a plug-in octal base and relay contacts rated at 10A.

Square D 9065SS110 Motor Logic solid-state overload relay delivers adjustable 9-27A motor overload protection in a 600VAC Class 10 design sized for NEMA Size 1 control applications.

Eaton DILEM-10 mini contactor delivers 8.80A switching, three-pole FVNR control, 1NO contact configuration, and 110–120 Vac coil operation in a compact IEC frame.

The Corcom NF21091-3 is a chassis-mount EMI line filter rated for 16 A at 250 VAC, 50/60 Hz. This metal-enclosed filter features clearly labeled LINE and LOAD terminals and is designed for installation in AC power input paths where conducted electrical noise reduction is required.

The Schrack ZG400615 is a used ice cube relay rated for 5 Amps and up to 600 Volts. It features a 14-pin plug-in design and a 115 VAC coil voltage, making it suitable for general industrial control and electrical switching applications where reliable electromechanical control is required.

Forney 312 High Energy Spark Igniter delivers Class 3 direct spark ignition for oil or gas igniters and small burners with 12 joules per spark, 2000 VDC output, and approximately 3 sparks per second.

The Potter & Brumfield KHAU-17D11-24 is a general-purpose industrial plug-in relay with a 24 VDC coil and 4 Form C contact arrangement. Designed for socket mounting, it supports control and power switching applications requiring multiple changeover contacts.

The General Electric CR305X100E is a side-mounted auxiliary contact adder block providing one normally closed (1 NC) contact for GE 200- and 300-Line starters and contactors. It is designed for field installation onto a basic auxiliary contact block and is rated up to 600 VAC and 250 VDC.

General Electric B4A82S1F1V1 Type SBM Switch delivers compact rotary cam control for industrial panels, combining panel-mounted operation, double-break contacts, and 600 VAC/VDC, 20 A continuous switching capability.

The Contrex M-Drive 4E is a digital DC motor drive and motion controller designed for closed-loop speed regulation of permanent magnet DC motors up to 2 HP. It supports dual AC input voltage, selectable DC output, serial communication, and integrated operator interface.

Johnson Controls P10BC-7C low pressure control, SPDT, 1-stage, 3 to 20 psi range, 12 psig factory setting, 2 psi switch differential, with barbed fitting.

The Advance L-220-F is a magnetic reactor ballast designed to operate two 15W or 20W preheat fluorescent lamps at 120V AC, 60 Hz. It regulates lamp current using an inductive core and requires external starters for lamp ignition in preheat fluorescent systems.

Allen-Bradley 194R-NJ030P3 fused rotary disconnect switch offers 30A, 600V isolation for industrial panels, supporting Class CC/J fuses and high-fault protection.