Search results for: 'and'

Moore Industries DPS 240 DIN-style power supply configured for 42 VDC output at 240 mA from a 117 VAC input. Linear regulated design with adjustable voltage, current limiting, and isolated output for powering 2-wire transmitters and instrumentation circuits.

The MEAN WELL HRP-600-15 is a single-output enclosed AC-DC power supply delivering 15 VDC at up to 43 A. It features built-in active power factor correction, fan cooling with ON-OFF control, and protection against overload, over-voltage, and over-temperature for industrial power applications.

The Kepco RA60 is a 19-inch rack-mount mainframe designed to house up to three Kepco HSP Series DC power supply modules. This configuration includes HSP 24-60MR and HSP 24-60R modules, supporting parallel operation, hot-swap capability, and high-current 24 VDC power distribution.

Lake Shore RIMF2V1 frequency-to-voltage converter brings encoder signal conversion into a compact control module with selectable V/RPM and PPR settings, 0/4-20 mA output, ±10V output, ±300V output, and relay output.

Vishay 36MB100A single phase bridge rectifier delivers 35 A average output and 1000 V VRRM in a compact MB Series package for general purpose and instrumentation power conversion applications.

The Deltron ST150-1XX is a 150 W industrial AC-DC switching power supply with three DC outputs. It provides one 5 V output rated at 20 A and two 12 V outputs rated at 5 A each. Designed for terminal block wiring, it supports dual-range AC input and is used in control and automation systems.

The TRACO Power TSP 090-124EX is a 90 W DIN-rail mount industrial power supply providing 24 VDC at 3.75 A. It features universal 85–264 VAC input, adjustable 24–28 VDC output, DC-OK signal, remote On/Off control, and ATEX II3G certification for hazardous locations.

ABB P350/702 power supply delivers regulated DC outputs from 110V/220V AC input for telecommunications and industrial power distribution applications.

SolaHD SDN 10-24-480 DIN Rail Power Supply delivers 24 VDC output at 10 A from a 380-480 VAC three-phase input, with adjustable 24-28 VDC output, parallel capability, and DIN rail mounting for industrial control systems.

The Emerson 73-610-115 is a DeltaV system power supply (DC/DC) module with 24 VDC system power input and labeled 12V, 5.1V, and 3.4V output rails.

Action Instruments AP9046 DC output power supply with 120VAC input, 24VDC regulated output, plug-in 8-pin design, and current loop power supply capability for two-wire transmission applications.

The Axiomatic IC-DR-13 is an analog signal converter designed to accept a standard 4–20 mA input and produce a user-selectable bipolar current output. Output range is jumper-selectable from ±10 mA to ±310 mA in 10 mA steps. The module operates from a 24 VDC nominal supply and is housed in a DIN-rail mount enclosure for industrial applications.

Moxa PWR-G7000-AC power supply module with 85–264 VAC input for ICS-G7000 series switches, supporting 47–63 Hz and 0–60°C operation in modular chassis.

Weidmuller PRO MAX 480W Power Supply: High-efficiency 24V, 20A power solution for demanding automation. Reliable performance in extreme conditions with long-lasting durability.

Tri-Mag Super 6250T2 power supply delivers regulated multi-voltage DC output including +5V, ±12V rails with up to 250 watts capacity for system power distribution and integration applications.

ABB 1SVR427032R0000 switch mode power supply delivers 24 VDC output at 2.5 A from a 100–240 VAC input, with adjustable output voltage from 24–28 VDC and 60 W max load capacity for control and industrial power applications.

Moore Industries DPS/24DC/240MA/117AC/-FA(DIN) is a compact DIN rail power supply delivering 24 VDC at 240 mA from 117 VAC input, with adjustable voltage, current limit control, and output status indication.

TDK-Lambda NNS30-15 linear AC/DC power supply with 15V DC output at 3.4A and 51W max power. NN Series unit with selectable AC input ranges, low ripple, remote sense, remote programming, and convection cooling.

Vishay 36MB100A single phase bridge rectifier supports 35 A average current and 1000 V VRRM in a compact D-34 package for general purpose and instrumentation power conversion.

Honeywell 620-0041 processor power supply module providing 115/230 VAC input and 8 A capacity for PLC system power distribution.

Modicon AS-P120-000 delivers reliable 24VDC power for Compact 984 PLC systems, supporting stable control performance and legacy system continuity.

ABB PHARPSCH100000 Power Chassis provides a rack-mounted power chassis platform for ABB industrial system power connections and distribution.

The Honeywell 30731808-001 Regulator Card is a power regulation module used in Honeywell industrial control systems. It converts a +24 VDC backplane input into regulated +5 VDC, +12 VDC, and −12 VDC outputs to support system modules within compatible control chassis.

Entrelec Schiele Systron PS 2.423.418.00 24V/1A DIN rail power supply delivers 24V DC at 1A from a wide 90-260V AC input for compact control-panel and automation power conversion.

Acopian 24EB10 is a mini encapsulated linear regulated AC-DC power supply delivering 24 VDC at 0.100 A through screw terminals for compact chassis, cabinet, and bench power integration.