Search results for: 'installation'

Action Instruments AP9046 DC output power supply with 120VAC input, 24VDC regulated output, plug-in 8-pin design, and current loop power supply capability for two-wire transmission applications.

The Emerson 73-610-115 is a DeltaV system power supply (DC/DC) module with 24 VDC system power input and labeled 12V, 5.1V, and 3.4V output rails.

Acopian 24EB10 is a mini encapsulated linear regulated AC-DC power supply delivering 24 VDC at 0.100 A through screw terminals for compact chassis, cabinet, and bench power integration.

SolaHD SDN 10-24-480 DIN Rail Power Supply delivers 24 VDC output at 10 A from a 380-480 VAC three-phase input, with adjustable 24-28 VDC output, parallel capability, and DIN rail mounting for industrial control systems.

Honeywell 620-0041 processor power supply module providing 115/230 VAC input and 8 A capacity for PLC system power distribution.

ABB PHARPSCH100000 Power Chassis provides a rack-mounted power chassis platform for ABB industrial system power connections and distribution.

The Keyence SL-U2 is a switching-type power supply unit designed for industrial safety applications. It provides a regulated 24 VDC output at up to 1.8 A from a universal 100–240 VAC input and is intended for use with Keyence safety light curtain systems.

The Emerson Ovation WH5D-2FF / 1X00416H03 power supply module provides regulated 24 VDC output for Ovation distributed control system backbones. The enclosed industrial module supports high-current control applications using wide-range AC or DC input power.

The Kepco RA60 is a 19-inch rack-mount mainframe designed to house up to three Kepco HSP Series DC power supply modules. This configuration includes HSP 24-60MR and HSP 24-60R modules, supporting parallel operation, hot-swap capability, and high-current 24 VDC power distribution.

Square D 83713 9070EO2D1 delivers open-type control circuit transformer operation with multi-tap primary input, 110/115/120 V secondary output, and 50/60 Hz ratings for industrial control panels.

The Allen-Bradley 1606-XLE480EP is a 24V DC, 20A (480W) switched mode power supply from the 1606-XLE Essential series. It supports 100–240V AC input and 110–150V DC input, features adjustable 24–28V output, 20% power reserve, DC OK relay contact, and screw terminals for DIN rail industrial installation.

Moore Industries DPS/24DC/1200MA/117AC [DIN] DIN power supply with 24VDC output, 1200mA output current, 117AC input, isolated output, and DIN rail-mount housing.

Modicon AS-P120-000 delivers reliable 24VDC power for Compact 984 PLC systems, supporting stable control performance and legacy system continuity.

Weidmuller PRO MAX 480W Power Supply: High-efficiency 24V, 20A power solution for demanding automation. Reliable performance in extreme conditions with long-lasting durability.

Vishay 36MB100A single phase bridge rectifier delivers 35 A average output and 1000 V VRRM in a compact MB Series package for general purpose and instrumentation power conversion applications.

Moxa PWR-G7000-AC power supply module with 85–264 VAC input for ICS-G7000 series switches, supporting 47–63 Hz and 0–60°C operation in modular chassis.

Phoenix Contact QUINT-PS/1AC/24DC/10 DIN-rail power supply provides 24 V DC (adjustable 18–29.5 V) at 10 A from a wide-range 1-phase AC or DC input. Includes DC OK signaling, BOOST indication, and SFB technology support.

Black Box IC107A-R2 RS-232↔RS-422/485 converter for data-only serial communication. Supports 4-wire full-duplex operation for point-to-point or multipoint links. Provides a DB25 female RS-232 interface and a 4-pin terminal block for RS-422/485 with TX/RX/PWR LEDs.

The Honeywell 30731808-001 Regulator Card is a power regulation module used in Honeywell industrial control systems. It converts a +24 VDC backplane input into regulated +5 VDC, +12 VDC, and −12 VDC outputs to support system modules within compatible control chassis.

Macro Sensors LVC-2500 Low Voltage Conditioner delivers DIN-rail LVDT and half-bridge signal conditioning with selectable 3 kHz, 5 kHz, or 10 kHz excitation, adjustable gain and offset, voltage and current outputs, and link-selectable analog math functions.

Magnetek 1030-14RA autotransformer delivers constant wattage autotransformer (CWA) regulation for 100W high-pressure sodium lamp systems operating at 277V, supporting stable lamp operation and controlled electrical output.

Moore Industries DPS/24DC/240MA/117AC/-FA(DIN) is a compact DIN rail power supply delivering 24 VDC at 240 mA from 117 VAC input, with adjustable voltage, current limit control, and output status indication.

Moore Industries DPS 240 DIN-style power supply configured for 42 VDC output at 240 mA from a 117 VAC input. Linear regulated design with adjustable voltage, current limiting, and isolated output for powering 2-wire transmitters and instrumentation circuits.

The TRACO Power TSP 090-124EX is a 90 W DIN-rail mount industrial power supply providing 24 VDC at 3.75 A. It features universal 85–264 VAC input, adjustable 24–28 VDC output, DC-OK signal, remote On/Off control, and ATEX II3G certification for hazardous locations.