Search results for: 'used'

The Honeywell 30731808-001 Regulator Card is a power regulation module used in Honeywell industrial control systems. It converts a +24 VDC backplane input into regulated +5 VDC, +12 VDC, and −12 VDC outputs to support system modules within compatible control chassis.

The Emerson 73-610-115 is a DeltaV system power supply (DC/DC) module with 24 VDC system power input and labeled 12V, 5.1V, and 3.4V output rails.

The Deltron ST150-1XX is a 150 W industrial AC-DC switching power supply with three DC outputs. It provides one 5 V output rated at 20 A and two 12 V outputs rated at 5 A each. Designed for terminal block wiring, it supports dual-range AC input and is used in control and automation systems.

Moeller FT8478 voltage transformer delivers reliable 100VA power conversion from 600V to 120V for industrial control and electrical distribution applications requiring stable voltage step-down.

The Emerson Ovation WH5D-2FF / 1X00416H03 power supply module provides regulated 24 VDC output for Ovation distributed control system backbones. The enclosed industrial module supports high-current control applications using wide-range AC or DC input power.

Black Box IC107A-R2 RS-232↔RS-422/485 converter for data-only serial communication. Supports 4-wire full-duplex operation for point-to-point or multipoint links. Provides a DB25 female RS-232 interface and a 4-pin terminal block for RS-422/485 with TX/RX/PWR LEDs.

Moore Industries DPS/24DC/1200MA/117AC [DIN] DIN power supply with 24VDC output, 1200mA output current, 117AC input, isolated output, and DIN rail-mount housing.

Acopian 24EB10 is a mini encapsulated linear regulated AC-DC power supply delivering 24 VDC at 0.100 A through screw terminals for compact chassis, cabinet, and bench power integration.

Macro Sensors LVC-2500 Low Voltage Conditioner delivers DIN-rail LVDT and half-bridge signal conditioning with selectable 3 kHz, 5 kHz, or 10 kHz excitation, adjustable gain and offset, voltage and current outputs, and link-selectable analog math functions.

Vishay 36MB100A single phase bridge rectifier supports 35 A average current and 1000 V VRRM in a compact D-34 package for general purpose and instrumentation power conversion.

TP-Link MC200CM Gigabit Media Converter provides 1000BASE-T to 1000BASE-SX conversion over multimode fiber, supporting Gigabit Ethernet connectivity through an RJ45 port and SC fiber port.

ABB P350/702 power supply delivers regulated DC outputs from 110V/220V AC input for telecommunications and industrial power distribution applications.

SolaHD SDN 10-24-480 DIN Rail Power Supply delivers 24 VDC output at 10 A from a 380-480 VAC three-phase input, with adjustable 24-28 VDC output, parallel capability, and DIN rail mounting for industrial control systems.

Introducing the OWON SPE3103 - Precision Power Supply for Your Every Need.

Square D 83713 9070EO2D1 delivers open-type control circuit transformer operation with multi-tap primary input, 110/115/120 V secondary output, and 50/60 Hz ratings for industrial control panels.

Action Instruments AP9046 DC output power supply with 120VAC input, 24VDC regulated output, plug-in 8-pin design, and current loop power supply capability for two-wire transmission applications.

The Kepco RA60 is a 19-inch rack-mount mainframe designed to house up to three Kepco HSP Series DC power supply modules. This configuration includes HSP 24-60MR and HSP 24-60R modules, supporting parallel operation, hot-swap capability, and high-current 24 VDC power distribution.

Entrelec Schiele Systron PS 2.423.418.00 24V/1A DIN rail power supply delivers 24V DC at 1A from a wide 90-260V AC input for compact control-panel and automation power conversion.

Vishay 36MB100A single phase bridge rectifier delivers 35 A average output and 1000 V VRRM in a compact MB Series package for general purpose and instrumentation power conversion applications.

Introducing the OWON SPE6053 - Compact Precision Power Supply for Your Needs.

Introducing the OWON SPE3102 200W DC Power Supply: Precision and Portability Redefined

TDK-Lambda NNS30-15 linear AC/DC power supply with 15V DC output at 3.4A and 51W max power. NN Series unit with selectable AC input ranges, low ripple, remote sense, remote programming, and convection cooling.

Honeywell 620-0041 processor power supply module providing 115/230 VAC input and 8 A capacity for PLC system power distribution.

The Keyence SL-U2 is a switching-type power supply unit designed for industrial safety applications. It provides a regulated 24 VDC output at up to 1.8 A from a universal 100–240 VAC input and is intended for use with Keyence safety light curtain systems.

Lake Shore RIMF2V1 frequency-to-voltage converter brings encoder signal conversion into a compact control module with selectable V/RPM and PPR settings, 0/4-20 mA output, ±10V output, ±300V output, and relay output.