Search results for: 'ROHS'

ABB TB806 Bus Inlet is a Modulebus extension cable adaptor with a D-sub 25 male connector. It is used with the TK801 extension cable to extend the ModuleBus in ABB S800 I/O systems. One adaptor is required per extension cable.

The Bussmann JKS-40 is a Class J fast-acting, current-limiting fuse rated at 40 A and 600 Vac. It is designed for rapid response to short-circuit conditions in industrial and commercial electrical systems requiring high interrupting capacity.

Fluke LENS/WIDE2 wide angle infrared lens expands field of view to 46° x 34°, enabling easier thermal inspections in tight spaces with compatible cameras.

Fluke Networks DSX-CHA004 CAT 6A Channel Adapter enables accurate channel certification with DSX2-5000 CableAnalyzer systems.

Compact and lightweight pocket-size device LCD display Non-contact ACV detector LED flashlight Data hold Low battery indication DCV 4200mV/2V/20V/200V±(0.5%+3d) 600V±(0.8%+5d) ACV 2V/20V/200V±(0.8%+3d) 600V±(1.0%+5d) DCA 200μA/2000μA /20mA/200mA±(1.8%+5d) ACA 200μA/2000μA /20mA/200mA±(2.0%+5d) Resistance 200Ω/2kΩ/20kΩ/200kΩ/2MΩ±(1.0%+3d) 20MΩ±(1.2%+15d) Non contact ACV detector Y Diode test Y Continuity with beep Y Certificate RoHS, CE EN61010-1 CATIII 600V Battery 2x1.5V AAA

The Fluke Networks NFA-MPO12P-KIT is a UniPort adapter kit designed for MPO 12 pinned fiber testing with the CertiFiber™ Max Optical Loss Test Set. It supports single-mode and multimode testing and enables standards-preferred one-jumper reference measurements while protecting the test port.

The Turck U-56934 is a Mini-Fast double-ended industrial sensor cordset designed for actuator and sensor connections in industrial automation environments. It features a straight male and right-angle female 7/8"-16 connector configuration, a 0.3 m cable length, and a yellow high-flex jacket.

Fluke 125B/NA/S Industrial ScopeMeter combines a 40 MHz oscilloscope, dual multimeters, and bus health testing for fast industrial troubleshooting.

Fluke L210 Probe Light Kit provides bright LED illumination and probe extenders to improve visibility and safety when testing live electrical circuits.

Fluke Networks DSX-CHA804 Channel Adapter enables CAT 8 channel testing and certification with DSX2-8000 CableAnalyzer systems.

Fluke Networks VERSIV2 Mainframe and Remote Unit delivers faster network certification workflows with built-in WiFi, higher memory, and module compatibility.

Fluke 9040 Phase Rotation Indicator: Accurate 3-phase testing with LCD display, high-voltage capability, and safe industrial probe connections.

Topaz Lighting LU100/MOG-37 high pressure sodium lamp delivers 100W output with clear ED23.5 construction and mogul base, providing consistent 9,500 lumen illumination and extended 24,000-hour service life for commercial lighting applications.

The Schneider Electric GTK0610 equipment grounding kit is a field-installable grounding kit for Square D F-Series heavy-duty safety switches. It supports copper or aluminum grounding conductors and is designed for switch applications up to 600 V.

The Allen-Bradley 800B-EAB is a 16 mm maintained square push button operator designed for light industrial and instrumentation applications. It features corrosion-proof plastic construction and gold-plated snap-action contact compatibility for reliable low-voltage switching when paired with Bulletin 800B contact blocks.

Fluke 301D-R AC/DC Clamp Meter delivers up to 600A current measurement in a slim, handheld design with a thin 10 mm jaw, backlit display, and essential electrical test functions for tight spaces.

Fluke TL175-HV TwistGuard test leads deliver high-voltage current measurement with CAT III 1500V safety, adjustable 2mm probe tips, and heavy-duty construction for reliable multimeter testing.

The WAGO 249-117 is a gray, screwless end stop designed to secure DIN-35 rail-mounted terminal blocks. It snaps onto TS 35 x 7.5 mm or 35 x 15 mm rails without tools. Constructed from PA66 polyamide with UL94 V0 flammability rating, it provides stable positioning and electrical insulation.

The Littelfuse L70S040 is a 40 A, 700 V high-speed semiconductor fuse designed for current-limiting protection of sensitive power electronics. It features a round melamine body with silver-plated copper terminals and is rated for both AC and DC systems.

The Bussmann DFJ-90 is a 90 A Class J high-speed, current-limiting drive fuse designed for protection of AC and DC drives and power semiconductor equipment. Rated 600 Vac and 450 Vdc, it provides high interrupting capacity and low let-through energy in branch circuits.

The Turck B8241-0/PG9 is a field-wireable M12 right-angle, 4-position female connector designed for sensor and actuator wiring in industrial automation. It uses a screw terminal connection, supports 250 V at 4 A, and accepts PG9 cable glands for secure, sealed installations.

1 x Pomona 2249-C-24 BNC Male to Male Antenna Cable (2 ft)

Fluke 753 documenting process calibrator sources and measures pressure, temperature, and electrical signals with automated documentation for compliance-ready calibration.

Fluke FEV150 EV Charging Station Analyzer enables safe, fast AC charger testing with Type 1 plug, automated control pilot tests, and guided workflows.

Fluke BK120 SmartTrace Breaker Finder accurately locates circuit breakers and detects AC voltage with NCV mode, socket testing, and visual alerts.