Search results for: 'chinvera'

The Fluke i1010 is an AC/DC current clamp designed for use with digital multimeters. It measures currents from 1 A up to 1000 A DC and up to 600 A AC using a Hall-effect sensor. The clamp outputs 1 mV per amp for direct reading on compatible meters.

Fluke TRC-SM-VERIFY-MPO24U is a reference-grade single-mode MPO 24 verification cord for CertiFiber™ Max testing, ensuring accurate reference setup when testing unpinned MPO fiber links.

The Kepco RA60 is a 19-inch rack-mount mainframe designed to house up to three Kepco HSP Series DC power supply modules. This configuration includes HSP 24-60MR and HSP 24-60R modules, supporting parallel operation, hot-swap capability, and high-current 24 VDC power distribution.

Fluke FLK2AC/90-1000V5PK VoltAlert non-contact voltage detector 5-pack senses 90–1000V AC through insulation, featuring always-on operation, battery check, and CAT IV 1000V safety rating.

Fluke Networks TRC-SM-VERIFY-MPO12U is a reference-grade single-mode MPO12 Type A verification cord designed to confirm proper reference settings when testing unpinned MPO cables with CertiFiber Max systems.

The MEAN WELL HRP-600-15 is a single-output enclosed AC-DC power supply delivering 15 VDC at up to 43 A. It features built-in active power factor correction, fan cooling with ON-OFF control, and protection against overload, over-voltage, and over-temperature for industrial power applications.

The ABB Bailey IMFCS01 is an intelligent Frequency Counter Slave Module for INFI 90 and Net 90 DCS platforms. It processes high-speed pulse inputs from field sensors and communicates frequency and period data to a Multi-Function Processor via the slave expander bus for speed monitoring and control.

Phoenix Contact QUINT-DIODE/12-24DC/2X20/1X40 is a DIN-rail mounted redundancy diode module for 12–24 V DC systems. It decouples parallel power supplies to increase system availability, supporting 2×20 A redundancy or 1×40 A increasing power operation.

Moore Industries DPS 240 DIN-style power supply configured for 42 VDC output at 240 mA from a 117 VAC input. Linear regulated design with adjustable voltage, current limiting, and isolated output for powering 2-wire transmitters and instrumentation circuits.

The General Electric CR305X100E is a side-mounted auxiliary contact adder block providing one normally closed (1 NC) contact for GE 200- and 300-Line starters and contactors. It is designed for field installation onto a basic auxiliary contact block and is rated up to 600 VAC and 250 VDC.

Allen-Bradley 1326AB-MOD-M6-C1 is an M6 encoder mounting adapter kit designed to install an 845H encoder onto 1326AB series motors, delivering secure mechanical feedback integration in industrial motion systems.

Fluke FLK-FEV150/TY1 PRO EV Charging Station Analyzer delivers safe AC EVSE testing with Type 1 plug, guided workflows, and advanced TruTest reporting.

Fluke FLK-FEV150/TY1 EV Charging Station Analyzer enables fast, safe AC EVSE testing with Type 1 connector, auto control pilot simulation, and guided workflows.

Allen-Bradley 871C-C5A18 inductive proximity sensor delivers reliable non-contact metal detection with a 5 mm sensing range, normally closed output, and AC 2-wire operation for industrial automation applications.

Allen-Bradley 1336-T-SP5A control transformer designed for 1336 PLUS, PLUS II, Force, and Impact drives, supporting 150–250 HP systems at 460 VAC with stable internal control power delivery.

Allen-Bradley 1772-SD2 remote I/O scanner enables PLC-2 processors to communicate with remote I/O racks, supporting up to 1792 I/O points with serial twinaxial connectivity and LED status indicators.

General Electric 193X532ABG04 field service control module for control/repair replacement use in compatible GE industrial systems. Identified by model number for accurate part matching.

Fluke 750PA5 pressure module delivers 0–30 psia absolute measurement with 0.01% reference uncertainty and digital communication for high-accuracy calibration.

Fluke PRV240FS provides a safe 240 V AC/DC source to verify FieldSense testers, multimeters, and clamp meters before and after live measurements.

Fluke FLK-II500 acoustic imager lets technicians visualize sound to locate gas and vacuum leaks fast with 2–52 kHz detection and a 7-inch touchscreen display.

Fluke i17XX-FLEX6000 flexible 36-inch current clamp measures up to 6000A AC and connects directly to Fluke 17XX loggers for accurate, scalable-free current readings.

Fluke FEV100/BASIC EVSE tester simulates an electric vehicle to verify charging station safety, run GFCI tests, and check voltage, duty cycle, and grounding.

Amprobe TMA10A anemometer measures air velocity, airflow, and temperature with a flexible vane, dual display, RS232 output, and multi-point averaging for HVAC diagnostics.

New Allen-Bradley 1756-IB32/B ControlLogix 32-Point 24V DC Digital Input Module for high-density DC signal interfacing in ControlLogix systems. Factory sealed, fast shipping, Cartoli support.