Search results for: 'periodo'

Fluke Networks NFA-MMC24P-KIT UniPort adapter kit includes two unpinned UniPort adapters for testing single-mode or multimode MMC24 pinned cables with the CertiFiber™ Max Optical Loss Test Set. Supports one-jumper reference methods and field-replaceable adapter protection.

The Fluke Networks NFA-MPO12U-KIT is a UniPort™ adapter kit designed for testing MPO12 unpinned fiber cables with the CertiFiber™ Max Optical Loss Test Set. It includes two field-replaceable UniPort adapters that support single-mode or multimode testing and enable standards-preferred one-jumper reference measurements.

The SATO RH1730800 is a genuine internal replacement part identified as a Cover Open Switch cable for SEN6-compatible SATO printer models. This component connects the printer’s cover detection mechanism to the main board, supporting proper open/close status recognition. Classified as an internal printer spare part, RH1730800 is intended for maintenance or repair of supported legacy SATO printers and has been designated end-of-life by the manufacturer.

The Fluke Networks NFA-MPO16P-SM-OUT is a single-mode MPO-16 pinned main or remote output adapter for the CertiFiber™ Max Optical Loss Test Set. This field-replaceable UniPort™ adapter enables direct connection to MPO-16 pinned fiber cables while protecting the tester port during certification workflows.

Fluke Networks NFA-MMC24U-KIT UniPort Adapter Kit is designed for testing MMC 24 unpinned single-mode or multimode fiber cables with the CertiFiber™ Max Optical Loss Test Set. The kit includes pinned UniPort adapters and supporting components for fiber loss, length, and polarity measurement applications.

The Fluke Networks NFA-MPO12P-KIT is a UniPort adapter kit designed for MPO 12 pinned fiber testing with the CertiFiber™ Max Optical Loss Test Set. It supports single-mode and multimode testing and enables standards-preferred one-jumper reference measurements while protecting the test port.

Fluke Networks NFA-CFM-LC Duplex LC Input Adapter enables accurate power and loss testing with CertiFiber Max OLTS, providing a field-replaceable LC interface that protects the test port during duplex fiber measurements.

General Electric 193X532ABG04 field service control module for control/repair replacement use in compatible GE industrial systems. Identified by model number for accurate part matching.

TP-Link MC200CM Gigabit Media Converter provides 1000BASE-T to 1000BASE-SX conversion over multimode fiber, supporting Gigabit Ethernet connectivity through an RJ45 port and SC fiber port.

Fluke Networks NFA-CFM-SC is a duplex SC input adapter for CertiFiber Max optical loss test sets, enabling accurate power and loss testing while protecting the instrument port with a field-replaceable design.

Fischer 333007 Pneumatic Preparation Unit provides organized pneumatic routing for Seal Air, Taper Air, Tool Eject, and Cylinder Vent circuits in industrial equipment setups.

Allen Bradley 1485P-P1R5-DR5 DeviceNet T-Port Connector provides reliable M12 trunk-to-drop branching for round media networks, ensuring durable industrial connectivity.

Fluke Networks NFC-SWABS-1.25MM fiber optic cleaning swabs are designed for LC and MU ports, delivering precise 1.25mm bulkhead cleaning with lint-free material for effective wet or dry connector maintenance.

Fluke MF-100 MultiFiber Pro Optical Power Meter (MFPOWERMETER) – Handheld OPM for MPO fiber trunks. Provides fast Tier-1 certification of loss, polarity, and continuity when paired with MultiFiber Pro light sources. Ideal for high-density data centers.

GAI-Tronics 13204-002 receiver cap set of 4 for industrial handsets used in Page/Party® and 700 Series communication systems. Designed as a replacement component for the receiver end of handset assemblies.

Fluke Networks PA-FC adapter enables seamless FC connections for OptiFiber Pro OTDR, ensuring accurate fiber testing with reliable link compatibility.

The GE ConnectPort X4-H ZB HSPA+ is an industrial cellular and ZigBee routing gateway designed for remote asset monitoring in water treatment and power applications. It combines HSPA+ cellular connectivity with ZigBee mesh networking in a rugged NEMA 4X enclosure.

The DJI Part 08 TB30 Smart Flight Battery ensures smooth flight operations for Matrice 30 Series Drones with self-heating, long-lasting power, and hot module replacement.

The INNO Instrument View Mini 2 OTDR (MINI2-SMF2) is a handheld optical time domain reflectometer designed for fiber optic maintenance and live network testing. This configuration includes a 1625nm filtered live port with a 30dB dynamic range for in-service fiber analysis without service interruption.

GAI-Tronics 12511-001 is a dynamic noise-canceling transmitter replacement kit for compatible handsets in industrial paging systems. The kit includes the transmitter element and replacement cap and is identified as a replacement for legacy part 12511-007.

Fluke Networks FINDFIBER FindFiber Remote ID Source enables fast optical fiber identification when used with a SimpliFiber Pro power meter, allowing single-technician verification of fiber routing and polarity.