Search results for: 'Delicatef'

Eclipse Tools Replacement Blade for 902-062 (Stationary) - Ensure your 902-062 model stays operational with this replacement blade designed for stationary use.

GE C208LSIR MicroVersaTrip Plus Trip Unit delivers replacement circuit breaker trip control with front-panel setup access, status display, and 800A sensor designation for compatible GE breaker systems.

Siemens POL906.00/MCQ Communication Module supports POL6xx-connected control architecture in a compact modular format, with visible LON-SCC identification plus on-product IP20, -40 to 70, 80 mA, and 0.4 W markings.

The Schneider Electric GTK0610 equipment grounding kit is a field-installable grounding kit for Square D F-Series heavy-duty safety switches. It supports copper or aluminum grounding conductors and is designed for switch applications up to 600 V.

Fluke Networks DSX2-5000 certifies installed copper cabling through the Versiv 2 platform with DSX-5000 measurement modules for structured network testing.

Fisher CASE-TW6 hard carrying case for use with TW-6 pipe and cable locator provides rugged transport protection. Designed to secure the TW-6 transmitter, receiver, and accessories in a durable impact-resistant shell built for field use.

Fisher TW9KTX-CHGR is a lithium-ion charger kit for the TW9000 transmitter. It charges TW9KTX-BATT batteries via an AC-powered cradle, ensuring reliable, field-ready operation.

The INNO Instrument HTS-SOC-01 is a heater cover accessory designed for use with compatible INNO fusion splicers. It replaces the standard heater cover to support splice-on connector (SOC) termination workflows where connector geometry requires an alternate heater configuration.

The INNO Instrument CG-23 Cooling Tray is an accessory designed for use with INNO View Pro series fusion splicers. It provides a dedicated location to position heat-shrink protection sleeves after the heating cycle. Compatible with View 3 PRO, View 5 PRO, and View 8 PRO models.

The INNO Instrument LBT-50 Battery Pack is a rechargeable 11.1V, 4200mAh Li battery designed for ARC fusion splicer platforms. It provides portable power support for field fiber optic splicing applications and integrates directly with compatible INNO Instrument splicer systems requiring the LBT-50 form factor.

The INNO Instrument EG-18 Electrode Grinder is a portable maintenance tool designed to resurface tungsten electrode rods used in fiber optic fusion splicers. It restores electrode tip geometry to support stable arc discharge and consistent splicing performance in field and lab environments.

The Inno Instrument USB-6P is a Mini USB (male) to USB Type-A (female) adapter cable designed for use with INNO M Series fusion splicers. It enables connection of compatible USB accessories such as inspection probes or USB storage devices for data transfer and software updates.

The Fluke FEV-CON-TSL is a Tesla type connector and cable designed for testing AC electric vehicle charging stations when used with the Fluke FEV100 EV Charging Adapter. It enables functional and safety testing of Tesla wall connectors at residential and commercial charging locations. Not compatible with DC fast chargers or Tesla Superchargers.

Fluke CO-205 Aspirator Kit enables clean flue gas sampling for CO measurement with Fluke CO-210 and CO-220 instruments, using a hand-operated aspirator and stainless steel probe for reliable readings.

The Honeywell 620-0081 Highway Interface Module (HIM) is a communication module used to connect Honeywell IPC 620 series controllers with TDC 2000/3000 Distributed Control Systems. It supports Data Hiway communication at 1.25 Mbps and is designed for rack-mounted installation in IPC 620 systems.

This CCC Series 4 temperature input module set includes one IOM TCW (I-1/201-2/200) and one EIOM TCW (E-1/202-3/200). Both modules are designed for 3-wire GDC RTD temperature inputs and chassis mounting within CCC Series 4 control systems.

Fluke Networks GLD3-DSX-5000QI Gold Support provides 3 years of calibration, repairs, loaner service, and 24/7 technical support for DSX-5000Qi.

Fluke Networks GLD3-CFP-Q-ADD-R Gold Support provides 3 years of calibration, repairs, loaner service, and 24/7 technical support for CFP-Q-ADD-R.

Fluke Networks GLD-DSX-ADD Gold Support delivers 1-year maintenance coverage for DSX-ADD, including software and firmware updates, calibration, repair services, and 24x7 technical support for uninterrupted testing operations.

Fluke Networks GLD3-CFP-MM-ADD provides 3 Year Gold Support technical service for CFP-MM-ADD, delivering annual calibration, factory refresh, loaner coverage, and 24/7 technical support for reliable operation.

Fluke Networks GLD-CFP-100-SI provides 1 year Gold Support for the CFP-100-SI CertiFiber Pro, including 24/7 technical support, calibration, firmware updates, parts replacement, and express service coverage.

Allen-Bradley 1336-RLOAD-SP5A load resistor designed for 1336 adjustable frequency drives. Supports 575V operation in Frame E systems rated 150–300 HP for controlled load management.

Allen-Bradley S50403 driver board designed for 1334 series AC drives, supporting 30–50 HP motor control. This replacement PCB regulates motor speed and torque through controlled voltage and frequency output.

Allen-Bradley 1756-CPR2 ControlLogix redundant power supply cable designed to connect a ControlLogix chassis adapter to a redundant power supply system for high-availability PLC installations.

Allen-Bradley SP-135893 is a precharge SCR firing circuit board kit for 1336 series 75 HP drives, supporting controlled DC bus charging and reliable drive startup in industrial motor control systems.