Search results for: 'motor motor'

Amprobe AMP-220 Clamp Meter delivers accurate 600A AC/DC measurements with True-RMS, Amp-Tip, backlit display, and non-contact voltage detection.

Fluke 28 II Digital Multimeter: Rugged, IP67 waterproof and dustproof, with true-RMS readings, high-accuracy voltage, current, and temperature measurements.

Sprecher + Schuh CS7E-31E control relay with attached CS7-PV auxiliary contact block. Rated for up to 690V AC, this 4-pole industrial control relay is used for switching control circuits in panel and machine control applications.

Fisher XLT-30-A acoustical leak detector with Big Foot ground microphone and Hydrophonic Cylinder Probe for underground water leak detection on hard surfaces and direct pipe contact applications.

Fluke 289/FVF True-RMS industrial logging digital multimeter combo kit with TrendCapture and FlukeView Forms software. Features 100 kHz AC bandwidth, 10,000-reading logging, LoZ voltage, low pass filter, low ohm capability, and peak recording.

The Fluke 289/IMSK Industrial Multimeter Service Kit combines the Fluke 289 logging multimeter with the i400 400A AC current clamp. The 289 features TrendCapture logging, low ohm capability, LoZ voltage, and a low pass filter for accurate measurements on variable frequency drives and noisy systems. The included i400 clamp enables current measurement up to 400 A AC without breaking circuits.

The Ferraz Shawmut USCC3 (M217522) is a 3-pole Class CC fuse holder rated 30A and 600 VAC/VDC. Designed for 35mm DIN rail mounting, it features IP20 finger-safe protection, pressure plate terminals, and a 200 kA SCCR for industrial circuit protection applications.

The Fluke CV300 is a 75 mm ClirVu® infrared window with a hand turn door latch, designed to improve electrical inspection safety. It enables thermal inspections without opening energized panels and supports fast single-hole installation while maintaining enclosure ratings.

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

Allen-Bradley 100S-C72DJ14C safety contactor delivers 72A IEC switching with mechanically linked contacts and a 24V DC diode-suppressed coil, providing reliable feedback for safety-related control circuits.

The Fluke IB875K kit pairs the rugged 87V True-RMS multimeter with insulated hand tools for safe, accurate industrial troubleshooting. It handles complex signals, VFD applications, and demanding environments while the included tools support high-voltage maintenance tasks.

CSI Ultraspec B811701 Machinery Analyzer: Precision laser alignment system for shafts, ensuring optimal spin axis straightening. Reliable, durable, and ideal for industrial applications.

Panasonic TH2376 is a TH23 series panel-mount hour meter rated for 115 to 120V AC at 60 Hz. It features a reset function and displays elapsed time from 0 to 9999.9 hours in 0.1-hour increments. Designed in DIN 48 size, it includes mounting bracket and decorative nut.

The Fluke 87V/E2 CAL Industrial Electrician Combo Kit centers on the Fluke 87V true-RMS digital multimeter and includes essential accessories for industrial electrical measurement. This configuration includes NIST traceable calibration with data and supports AC/DC voltage to 1000 V, AC/DC current to 10 A, resistance to 50 MΩ, capacitance to 9999 µF, frequency to 200 kHz, and temperature to 1090°C. Rated to CAT III 1000 V and CAT IV 600 V.

The Fluke 87V MAX True-RMS Digital Multimeter is designed for electrical measurement in demanding environments. It measures up to 1000 V AC/DC and 10 A AC/DC, with True-RMS accuracy for non-linear signals. This CAL version includes NIST traceable calibration with data, along with TL175 test leads, temperature probe, holster, and installed batteries.

The Ferraz Shawmut UltraSafe USCC2 P216489 is a 2-pole modular fuse holder rated for 30A and 600 VAC/VDC for Class CC fuses. Designed for DIN rail mounting, it features IP20 finger-safe protection, pressure plate terminals, and a 200 kA SCCR for industrial control panel applications.

The Eaton P1-25/V/SVB is a 25 A, three-pole main switch from the Eaton Moeller® P1 series designed for rear mounting applications. It features a door-coupling rotary drive with a red rotary handle and yellow locking ring, and supports emergency switching off functionality. The switch is rated up to 690 V AC, provides IP65 front protection, and is lockable in the 0 (Off) position for secured isolation.

Fluke 54 II B Dual Input Data Logging Thermometer measures J, K, T, E, N, R, and S thermocouples with dual inputs and true differential capability. Logs up to 500 data points with adjustable intervals and supports IR USB export.

Fluke 1550C Insulation Resistance Tester delivers digital insulation testing up to 5 kV with DAR/PI calculations, long battery life, and Fluke Connect support.

Allen-Bradley 800T-XA contact block delivers 1NO/1NC switching for 30.5 mm Bulletin 800T and 800H operators, providing dependable control panel signaling in modular industrial systems.

Fluke 190-202-III-S portable ScopeMeter delivers 200 MHz bandwidth, 2 channels, 2.5 GS/s sampling, and FlukeView software for advanced industrial diagnostics.

Fluke 28IIEX/ETL intrinsically safe multimeter built for hazardous sites, offering true RMS accuracy, IP67 protection, and full industrial measurement capability.

Bussmann LKS-30 fuse link delivers reliable 30A time-delay protection for RES Class H systems, offering renewable 600V performance for industrial applications.