Search results for: 'rating range range'

AEMC MTX 3290 Multimeter: Waterproof TRMS meter for measuring voltage, current, resistance, temp & more. Rugged IP67 body, CAT IV safety, and 6000-count LCD display.

AEMC AmpFlex® Rogowski coil current probe with 36" flexible loop. Measures up to 6000A AC with 1mV/A and 0.1mV/A dual output. Waterproof IP65 sensor. Requires adapter #2118.46 for BNC input.

Digi-Pas DWL280Pro waterproof digital torpedo level delivers 0.05° resolution, IP67 protection, magnetic V-groove alignment, and LED angle measurement for precise leveling in demanding indoor and outdoor work.

Leviton 3433-C locking connector delivers 30A, 120/208V 3ØY grounding connectivity in a 4-pole, 4-wire non-NEMA configuration for industrial cord connection.

Toshiba VF-S11-4015PL-WN(3) industrial inverter delivers precise speed control for 3-phase induction motors with built-in EMI filtering, sensorless vector control, and compact panel-mount design.

Toshiba VF-S11-4015PL-WN industrial inverter delivers precise 3-phase motor speed control for 380–500V systems, supporting 1.5kW motors with compact design, high torque output, and flexible control modes.

Amprobe AMP-330 Clamp Meter: Accurate 1000A AC/DC, temperature, and flame sensor testing for motors, HVAC, and industrial electrical systems.

Vishay 36MB100A single phase bridge rectifier delivers 35 A average output and 1000 V VRRM in a compact MB Series package for general purpose and instrumentation power conversion applications.

Panduit PCSB2/0-4 delivers dependable splicing with a clear PVC 4-port design, wide 2/0–14 AWG compatibility, and corrosion-resistant multi-tap performance.

The upgrade to the Sauermann High Accuracy Draft Sensor 2 within the 500 Pascal (Pa) range signifies a noteworthy advancement in pressure measurement technology. Its incorporation of exceptional precision, an extended measurement span, and cutting-edge functionalities renders it an essential tool.

AEMC 2118.79 Kelvin Clips deliver 10 ft 1-10A low-resistance test lead connectivity for compatible AEMC micro-ohmmeters.

The Hydrajaws M35+ Large Bridge Expander is an essential upgrade for professionals who require enhanced load capacity, extended reach, and uncompromising reliability. With its 14,613 lbf (65 kN) Safe Working Load and 12.2 in. (310 mm) span, it enables precise, safe testing across a broader range of building materials.

The Curtis Industries CUS8 is an 8-pin octal relay socket base designed for industrial control applications. Rated at 10A and up to 300V, it provides a standardized receptacle for compatible 2PDT octal relays or timers and supports secure screw-terminal wiring.

AEMC HX0130 PROBIX PRHX1 1/10 Probe offers 500MHz bandwidth for precise voltage measurements. Designed for OX Series with CAT III 300V rating.

AEMC PowerPad III power quality analyzer supports electrical diagnostics, power monitoring, harmonics, alarms, transients, and energy analysis for single- or three-phase networks.

The Fluke i1010 is an AC/DC current clamp designed for use with digital multimeters. It measures currents from 1 A up to 1000 A DC and up to 600 A AC using a Hall-effect sensor. The clamp outputs 1 mV per amp for direct reading on compatible meters.

The Opto 22 AD6T is a single-channel, optically isolated analog input module designed for 0–5 VDC signals. Built in Opto 22 G1 (Standard) form factor, it provides 12-bit resolution, 4,000 VRMS isolation, and compatibility with Standard analog I/O racks for industrial control systems.

Fluke T130 voltage and continuity tester delivers reliable AC/DC testing from 6–690V with LCD display and switchable load, helping electricians verify live and dead circuits safely and clearly.

Fluke ii905 acoustic imager detects compressed gas and vacuum leaks with LeakQ analysis, SoundMap imaging, and Wi-Fi connectivity for fast reporting.

AEMC 2620 Leakage Current Probe: Detect low-level ground and differential faults with high accuracy, large jaw opening, and DMM compatibility.

KATKO KU 380N load break switch delivers 3-pole isolation and switching up to 80A at 690V AC-22, supporting reliable control and disconnection of electrical loads in industrial power systems.

AEMC MN255 AC Current Probe: Switch-selectable 20A/200A ranges, 100mV/10mV output, banana plug lead, UL approved for precise low and high current use.

AEMC 6529 Digital Megohmmeter Multimeter: Compact, rugged insulation tester with PI/DAR, continuity, voltage & resistance tests—ideal for field use.

The Sauermann Si-CA 230-6NDSC combustion gas analyzer brings six-gas emissions measurement to boiler, engine, and combustion system testing with O2, CO, NO, NO2, SO2, CxHy, CO dilution, draft, pressure, and reporting capability.