Search results for: 'one stock'

The Fluke i1010 is an AC/DC current clamp designed for use with digital multimeters. It measures currents from 1 A up to 1000 A DC and up to 600 A AC using a Hall-effect sensor. The clamp outputs 1 mV per amp for direct reading on compatible meters.

The Fluke FEV-CON-TSL is a Tesla type connector and cable designed for testing AC electric vehicle charging stations when used with the Fluke FEV100 EV Charging Adapter. It enables functional and safety testing of Tesla wall connectors at residential and commercial charging locations. Not compatible with DC fast chargers or Tesla Superchargers.

The Fluke CV301 is a 3 in (75 mm) ClirVu® infrared inspection window with a security key door latch. Designed for permanent installation on electrical enclosures, it enables infrared inspections without opening panel doors while maintaining enclosure ratings and safety compliance.

The Opto 22 AD6T is a single-channel, optically isolated analog input module designed for 0–5 VDC signals. Built in Opto 22 G1 (Standard) form factor, it provides 12-bit resolution, 4,000 VRMS isolation, and compatibility with Standard analog I/O racks for industrial control systems.

The Universal 447-LR-TC-P is a 120V magnetic fluorescent ballast designed to operate two lamps in trigger-start configurations. It supports F20T12, F15T8, and F15T12 lamps and features a low power factor, lag-type circuit. UL and CSA certifications support indoor and Type 1 outdoor use.

Fluke I410 AC/DC current clamp adapter expands digital multimeters to measure 1A–400A AC/DC using Hall-effect sensing with 1mV/A output, enabling safe, non-intrusive current measurements.

Amprobe LM-120 light meter delivers accurate auto-ranging lux and footcandle measurements using a silicon photodiode sensor, with MIN/MAX capture and data hold for lighting diagnostics.

The Hammond Power CRX06D1BC is a three-phase iron core line reactor rated for 600 VAC and 6.1 A. Part of the HPS Centurion® R Series, it provides controlled impedance to mitigate harmonics and electrical transients in AC drive systems operating at 50/60 Hz.

ABB S201-K1 miniature circuit breaker set consisting of two single-pole 1 A MCBs from the System pro M compact S200 series. Each breaker features a K tripping characteristic and is designed for DIN-rail mounting in AC or DC electrical installations.

The Allen-Bradley 1492-SP1C250 is a single-pole, 25 A supplementary circuit breaker with a Type C tripping characteristic. Designed for DIN rail mounting, it provides thermal-magnetic overcurrent protection for commercial and light industrial control circuits operating with inductive loads.

Fluke Networks TRC-SM-VERIFY-MPO16P is a reference-grade single-mode MPO16 verification cord for CertiFiber Max, designed to confirm accurate reference settings when testing pinned MPO16 fiber links.

Fluke T+PRO-1AC combines a full-featured electrical tester with a non-contact AC voltage detector for safe AC/DC testing, continuity checks, GFCI testing, and fast live circuit detection.

Fluke Networks TRC-SM-VERIFY-MPO12U is a reference-grade single-mode MPO12 Type A verification cord designed to confirm proper reference settings when testing unpinned MPO cables with CertiFiber Max systems.

Pomona 5523 Minigrabber Patch Cord Kit includes ten 24-inch 20 AWG test leads with gold-plated minigrabber clips, providing secure temporary jumper connections for terminals and wire-wrap posts.

Fluke AC220 SureGrip alligator clips provide insulated, high-voltage test lead connections for electrical measurements. Designed for use with TL222 and TL224 leads, offering secure gripping on conductors and terminals.

Mersen A050F300 Protistor semiconductor fuse delivers ultra-fast aR protection at 500V and 300A, designed to limit let-through energy and protect sensitive power electronics in high-performance drive and converter systems.

The General Electric DS200DDTBG2ABB is an LCI Auxiliary I/O Terminal Board for GE Mark V Speedtronic gas and steam turbine control systems. It provides auxiliary signal termination, conditioning, and isolation for analog and digital I/O in high-voltage industrial control environments.

The GE DS200VPBLG1AFF is a VME P2 backplane board used in GE LS2100 and Load Commutated Inverter control systems. It provides centralized power and signal distribution across a 13-slot chassis, supporting DSPC, gate distribution, exciter, and I/O extender boards.

The MEAN WELL HRP-600-15 is a single-output enclosed AC-DC power supply delivering 15 VDC at up to 43 A. It features built-in active power factor correction, fan cooling with ON-OFF control, and protection against overload, over-voltage, and over-temperature for industrial power applications.

The Phoenix Contact RAD-OUT-8D-REL is an 8-channel digital relay output extension module for Radioline wireless systems. It provides floating relay contacts for reliable signal switching and supports DIN rail mounting in industrial automation environments.

The Square D 8501NR61 is an 11-pin plug-in relay socket designed for use with compatible Square D relays and timers. It features single-tier screw clamp terminals and supports both panel and DIN rail mounting for industrial control applications.

The Allen-Bradley 800T-XA2 Series D is a 30 mm industrial control contact block featuring two normally open contacts and an A600 NEMA pilot duty rating. Designed for use with Bulletin 800T operators, it provides screw-terminal connections and base-mount installation for industrial control panels.

Fluke 705 Loop Calibrator delivers precise mA sourcing, simulation, and measurement with 0.02% accuracy, built-in 24V loop supply, and simultaneous mA and percent-of-span display for efficient loop calibration.

Amprobe 37XR-A digital multimeter delivers True RMS accuracy with component and logic testing, backlit display, and CAT III 600 V safety.