Search results for: 'extrenal'

Pro'sKit Insulated Light Blue Wire Ferrules: High-quality, corrosion-resistant, and safe terminations for all wiring needs. 500 pcs of 24 AWG, 6mm ferrules included.

Digi-Pas DWL5000XY PC Sync PRO Software brings remote tilt monitoring, 2D leveling, alignment, vibration measurement, and data logging together in one fast, plug-and-play workflow for compatible Digi-Pas systems.

Eagle Eye Power Solutions VS-Series ventilation system provides 1050 CFM forced-air exhaust for battery rooms, helping purge hydrogen and other gases.

Elcometer 331 TH Deep Cover Concrete Covermeter & Half Cell Gauge for reinforced concrete surveys requiring rebar location, cover depth measurement, bar sizing, and TH linear/grid data logging.

RaySafe Xi light meter with B Light Probe for luminance and illuminance measurement in medical diagnostic X-ray imaging environments, including display and ambient light assessment.

Eagle Eye HGD-4000 hydrogen gas detector with intrinsically safe design, AC power input (85–265 VAC), dual internal alarm relays, and LED status indication.

INNO Instrument View Mini 2 OTDR kit (MINI2-SMF1) for last-mile and FTTH fiber testing with 1310/1550nm, 32/30dB (SMF1) performance. Features a 5-inch touch LCD, built-in VFL and light source, 8GB storage, and up to 12-hour battery operation. V-20 microscope not included.

The INNO Instrument SC-SM-APC-09 is a field-installable SC/APC singlemode splice-on connector supplied in 10 a pack. Designed for fusion splicer termination, the connector houses and protects the fusion splice within the connector body, eliminating separate splice trays. The cleaved and polished ferrule supports repeatable field assembly.

Fisher XLT30-D acoustic leak detector with Multi-Sensor delivers precision underground water leak detection on hard and soft surfaces using advanced filtering and LCD audio visualization.

The INNO USB Type-C to USB Type-A (Female) Cable is an OTG adapter designed for INNO View-series fusion splicers equipped with a USB-C interface. It enables connection of standard USB-A peripherals such as flash drives, mice, or keyboards for data transfer and accessory operation.

The INNO Instrument USB-8P is a USB Type-C to USB Type-A male cable designed for data connectivity with compatible INNO fusion splicers and related devices. It supports USB 2.0 communication for firmware updates, data export, and accessory interfacing in fiber optic splicing environments.

The Dwyer AP-7021-153-39 is a diaphragm operated pressure switch with an adjustable 10 to 125 psig range. It uses an SPDT snap acting switch in a general-purpose enclosure and is designed for air, non-corrosive gases, or compatible liquids.

The KAMAN Sensors digiVIT 855949-000 is a self-tuning digital driver for non-contact inductive and eddy current position and displacement sensors. It features pushbutton calibration, embedded intelligence, selectable analog outputs, and Ethernet connectivity for monitoring and parameter switching.

Fluke Networks 262003AL Pro3000 Tone Generator uses SmartTone technology to trace and identify cable pairs on non-active networks up to 10 miles.

Fluke Networks 26200900 Pro3000 Tone Generator uses SmartTone technology to accurately trace and identify copper cable pairs up to 10 miles.

Toshiba VF-S11-4015PL-WN industrial inverter delivers precise speed control for 3-phase induction motors, supporting 1.5kW operation on 380–500V systems with compact panel-mount design and flexible control modes.

Allen-Bradley 50388 Driver PCB Board provides signal conditioning and drive interface control for compatible Allen-Bradley automation systems, supporting reliable communication between logic modules and field devices.

Metso Automation PDP401 Distributed Processing Unit for the maxDNA DCS, delivering core data acquisition, control execution, and processing within rack-mounted Metso automation systems.

Metso Automation IOP351 is a relay output I/O interface module designed for Metso control systems, enabling reliable field device switching and control in industrial automation and process environments.

Allen-Bradley 800H-R3HA7 explosion-proof selector switch station with HAND-OFF-AUTO operation, built in a Type 7 & 9 aluminum enclosure for Class I, II, and III hazardous industrial locations.

Fluke 721-3630 dual-sensor calibrator offers 36 and 3000 psi ranges, 0.025% accuracy, mA measurement, and RTD temperature input for custody transfer applications.

Fluke FLUKEVIEW-2 SCM software streamlines documentation, waveform transfer, analysis, and setup management for ScopeMeter 190 Series III tools.

Fluke 805 FC Vibration Meter delivers accurate, repeatable machine and bearing health checks with severity-scaled readings and mobile app integration.

Adam Equipment GC Counting Indicator-GCa: Precise, reliable and built for industrial parts counting. Versatile, portable and performance-focused.