Search results for: 'max the desiner'

Fluke Networks FTK1475 SimpliFiber Pro Kit – Fiber testing kit with optical power meter, 850/1300 nm multimode and 1310/1550 nm singlemode sources, and FiberInspector Mini probe for connector inspection and loss verification.

Siemens 4700-DC3-11HN digital power meter providing true-RMS voltage, current, power, energy, demand, waveform capture, programmable relays, and analog output for industrial power monitoring systems 

Radiodetection RD1000 portable ground penetrating radar system with RD1000+ display for real-time subsurface imaging, utility mapping, and locating metallic and non-metallic infrastructure with on-screen depth estimation and snapshot recording.

Phoenix Contact QUINT-DIODE/12-24DC/2X20/1X40 is a DIN-rail mounted redundancy diode module for 12–24 V DC systems. It decouples parallel power supplies to increase system availability, supporting 2×20 A redundancy or 1×40 A increasing power operation.

Fluke 368 FC clamp meter provides 1μA resolution, 60A leakage testing, wireless Fluke Connect logging, and a shielded 40 mm jaw for accurate troubleshooting.

Automatic one-button tests wavelength 1310 & 1550nm Palm design, small, lightweight, easy to carry High contrast 3.5 inch color TFT LCD Detect short dead zone event accurately High speed signal processing, short test time and fast analysis USB port connect to PC for software update and data output OTDR simulation software shows details of events Built-in visual fault locator function Rechargeable lithium polymer battery, max 8 working hours

Fluke 566: Rugged infrared and contact thermometer with 30:1 D:S ratio, -40°C to 650°C range, adjustable emissivity, and dual backlit display.

Fluke 369 FC clamp meter offers precise leakage current detection with 1µA resolution, 61 mm jaw size, wireless reporting, and a filter function for noise reduction.

Westinghouse 9966D75G01 IQ Data Plus II power monitoring display delivers three-phase electrical measurement including amps, volts, watts, power factor, and energy data for digital metering systems.

Fluke 177 multimeter delivers True-RMS accuracy, backlit display, and CAT IV safety for fast, reliable electrical troubleshooting in any environment.

Panasonic TH2376 is a TH23 series panel-mount hour meter rated for 115 to 120V AC at 60 Hz. It features a reset function and displays elapsed time from 0 to 9999.9 hours in 0.1-hour increments. Designed in DIN 48 size, it includes mounting bracket and decorative nut.

The Weidmüller 1122-8800-00 TRZ 24VDC 1CO is a slim DIN rail relay interface module with a 24 V DC control voltage and one changeover (SPDT) contact. It supports up to 6 A switching current and uses tension-clamp connections for secure, screwless wiring in control cabinets.

Fluke FLK-3000FC IND system offers wireless multimeter testing with current and voltage modules, remote monitoring, logging, and Fluke Connect integration.

The PLS 5G is a self-leveling five-point green laser level designed for plumb, level, and square point layout. It delivers ≤1/8 in accuracy at 30 ft (≤3 mm at 10 m) and features a pendulum lock for transport and tilt mode operation. With IP54 protection and a Class 2 green beam (525 nm), the PLS 5G supports interior layout applications up to 100 ft working range.

AEMC MiniFlex® 30/300A flexible AC current probe measures up to 300A with high-frequency response, lightweight design, and compatibility with BNC oscilloscopes.

Fluke 718Ex 30 intrinsically safe pressure calibrator delivers accurate 30 PSI gauge pressure testing with a built-in hand pump, current measurement, and ATEX-rated safety for hazardous-area calibration work.

The Fluke Networks TS52 PRO (52801004) brings the TS52 series reliability to a configuration with a 346A plug interface. It features a back-lit LCD, glow keypad, and DataSafe high-impedance monitoring—designed for line testing in telecom installations.

The Fluke i310s AC/DC current clamp is a Hall Effect-based probe designed for non-intrusive current measurement with oscilloscopes and multimeters. It supports AC and DC current measurement up to 450 A peak, with a frequency range from DC to 20 kHz and dual selectable ranges for measurement flexibility.

Allen-Bradley 1771-WA Series B provides reliable 10-terminal wiring for PLC-5 1771 I/O modules, supporting easy module changes and high-intent PLC wiring applications.

Fluke 289/FVF True-RMS industrial logging digital multimeter combo kit with TrendCapture and FlukeView Forms software. Features 100 kHz AC bandwidth, 10,000-reading logging, LoZ voltage, low pass filter, low ohm capability, and peak recording.

Fluke 27 II delivers rugged industrial multimeter performance with IP67 protection, 3 m drop resistance, and accurate voltage, current, and capacitance testing.

The PLS 6R RBP KIT is a self-leveling cross line and point red laser level designed for plumb, level, and square layout applications. It provides 180° horizontal and 130° vertical fan angles with ≤1/8 in accuracy at 30 ft. This kit includes the RBP5 rechargeable Li-ion battery pack, alkaline battery pack, floor stand, magnetic L-bracket, UB9 wall/ceiling bracket, and reflective target.

Fluke 376FC True-RMS Clamp Meter delivers wireless AC/DC current and voltage measurements up to 1000A with iFlex probe and Fluke Connect support.

AEMC 6418 Clamp-On Ground Resistance Tester: Fast, clamp-on testing with memory, alarm, and no auxiliary rods—ideal for reliable earth measurements.