Search results for: 'panels 10'

Allen-Bradley 1492-CABLE025E pre-wired cable delivers a 2.5 m cable assembly for 1746 digital I/O, offering a ready-to-use connection format for compatible automation wiring layouts.

The Mitsubishi CP30-BA 1-Pole 3A M-Curve Circuit Protector is a compact hydraulic-magnetic supplementary protector designed for low-capacity control circuits. It supports AC 250 V and DC 65 V operation, offers 2.5 kA breaking capacity, and mounts on standard DIN rail using screw terminals.

The Contrex M-Drive 4E is a digital DC motor drive and motion controller designed for closed-loop speed regulation of permanent magnet DC motors up to 2 HP. It supports dual AC input voltage, selectable DC output, serial communication, and integrated operator interface.

Toshiba VFS11-4015PL-WN (5) VF-S11 inverter drive for 1.5 kW three-phase motor control using 380–500 VAC input with built-in EMI filtering. 

Allen-Bradley 2705-K11C1 RediPANEL keypad module provides numeric data entry, message display, and alarm acknowledgment through Remote I/O communication with Allen-Bradley PLC systems.

Allen-Bradley 700-HA33Z24-3 is a 24V DC general-purpose ice cube relay with 3PDT contacts, push-to-test and manual override, designed for dependable industrial control and panel automation.

Allen-Bradley 1771-A4B PLC-5 16-slot I/O chassis provides a backplane for mounting 1771 I/O modules, distributing 5V DC power, and supporting industrial PLC-5 control system expansion.

The Fluke 51-II is a handheld single-input digital thermometer designed for contact temperature measurement using J, K, T, or E type thermocouples. It delivers fast response with laboratory accuracy and features a large backlit dual display, Min/Max/Avg functions, electronic offset, and 60 Hz noise rejection.

The Hammond Power CRX06D1BC is a three-phase iron core line reactor rated for 600 VAC and 6.1 A. Part of the HPS Centurion® R Series, it provides controlled impedance to mitigate harmonics and electrical transients in AC drive systems operating at 50/60 Hz.

Allen-Bradley 50388 Driver PCB Board provides signal conditioning and drive interface control for compatible Allen-Bradley automation systems, supporting reliable communication between logic modules and field devices.

Marel MWS 4 Weight Control Module for industrial weighing systems, with CAN network labeling, dual RS232 ports, multiple sensor terminals, and four load cell connections in a compact panel-mount format.

The Mettler Toledo M300 2-Channel Multi-Parameter Transmitter is a ¼ DIN panel-mount analytical transmitter designed for pH/ORP, oxygen, and conductivity measurements. It features dual channel capability, isolated 0/4–20 mA outputs, configurable relays, and USB connectivity for configuration and software updates. The backlit LCD display and quick setup interface support operation in industrial process environments.

Mitsubishi TH-T25KP thermal overload relay provides 3-element overload protection with a 1.7 A heater designation, 1.4–2 A setting range, and auxiliary NO/NC contacts for industrial motor control circuits.

AutomationDirect D2-08NA-1 is an 8-point AC input module for DL205 PLC systems with 80-132 VAC input range, 47-63 Hz operation, removable terminal connection, and logic-side status indication.

Allen-Bradley 800T-FXJE6A5 emergency stop pushbutton with maintained push-pull action, jumbo red E-STOP mushroom head, and dual normally closed late-break contacts for industrial safety circuits.

3Z RF Vision Antenna Alignment Tool: Accurate, weather-resistant alignment with built-in camera & AR. Perfect for precise antenna measurements and efficient setup.

Fujikura FSM-50R12 ribbon fusion splicer delivers fast 12-fiber ribbon splicing with auto arc calibration, rapid sleeve heating, dual-view monitoring, and CT-30 plus HJS-02 tools for precise ribbon preparation.

Siemens 3RT2035-3AK60 SIRIUS power contactor rated 41 A (AC-3) at 400 V with 18.5 kW operating power. Three-pole design with integrated 1 NO + 1 NC auxiliary contacts and 110 V AC (50 Hz) / 120 V AC (60 Hz) control coil. Size S2 frame with screw-type main terminals and spring-loaded auxiliary/control terminals.

General Electric THQL2120 delivers reliable 20A, 2-pole protection for GE Q-Line load centers. Ideal for residential circuits and 240V equipment with plug-in installation.

The EXFO Soft Pulse Suppressor Bag eliminates OTDR dead zones, ensuring accurate fiber optic testing. Compact and reliable, it’s ideal for precise measurements during installation and troubleshooting.

Refurbished Trimble Spectra Precision GL722 Dual Slope Grade Laser Kit with RC703 remote and HL450 receiver. Features PlaneLok, Automatic Axis Alignment and Grade Match Mode for precise construction and road grading.

Square D ATV66U41N4 delivers reliable 3 HP motor speed control with 460V operation, Modbus communication, and adjustable frequency for industrial automation.

Allen-Bradley 1769-L33ER CompactLogix 5370 L3 controller delivers Ethernet/IP connectivity and modular Compact I/O expansion for medium-scale industrial automation systems.

Emerson Ovation 5X00106G31 electronics module for Ovation DCS analog input. Provides 8 isolated 4–20 mA channels with per-channel HART transceivers for device communication. Supports signal acquisition between field devices and the controller.