Search results for: 'provides'

Schneider Electric 9001KU7 is a clear silicone rubber push button boot for Harmony 9001K and 9001SK non-illuminated 30 mm push buttons.

The EMI Corp Gimatic 6753 SB2C Sensor Junction Box enables connection of up to two sensors with series or parallel wiring, PNP/NPN signal conversion, dry contact I/O, signal regeneration, and LED status indication for efficient automation integration.

Kanson Electronics 1010-1-J-2 off-delay timer relay delivers adjustable 0.5 to 50.0 second timing with 115V 50/60Hz operation and 10 amp output switching for industrial control circuits.

Brass 294-06-06 fitting delivers secure 3/8 in hose barb to rigid tube shank connections using push-lock engagement. Designed for fluid transfer systems requiring reliable, non-swivel straight-through connectivity in a compact brass form.

The Siemens 3TX4422-0A SIRIUS auxiliary contact block features 2NO + 2NC instantaneous contacts with screw-type terminals. Designed for use with contactor relays and power contactors according to EN 50011, it supports snap-on mounting, IP20 front protection, and positively driven operation per IEC 60947-5-1.

The UN1CO Tripod is a dedicated mounting stand designed to support the UN1CO Mobile tray system. It provides an elevated and stable working platform for fiber splicing and FTTH field applications where ladder or pole mounting is not required.

Fluke FPC1S-FPQ170-1 Premium Care provides one year of service coverage for 177X Series Power Quality instruments. The plan includes annual calibration or performance check, repair coverage with parts and labor, expedited freight, software updates, accessory replacement, and priority technical support without loaner service.

Fluke FPC1S-MDA-500-1 Premium Care provides one year of service coverage for MDA-500 Series test tools. Coverage includes annual calibration or performance check, repair services with parts and labor, expedited freight, accessory replacement, software updates, and priority technical support. No loaner units included.

The Fluke CO-220 is a handheld carbon monoxide meter designed to detect and measure CO concentrations from 0 to 1000 ppm. It uses a stabilized electrochemical, gas-specific sensor and provides both numeric LCD readings and an audible beeper response. Features include MAX Hold, automatic backlight, sensor self-test, and automatic power-off.

The Hammond Power CRX06D1BC is a three-phase iron core line reactor rated for 600 VAC and 6.1 A. Part of the HPS Centurion® R Series, it provides controlled impedance to mitigate harmonics and electrical transients in AC drive systems operating at 50/60 Hz.

The General Electric DS200DDTBG2ABB is an LCI Auxiliary I/O Terminal Board for GE Mark V Speedtronic gas and steam turbine control systems. It provides auxiliary signal termination, conditioning, and isolation for analog and digital I/O in high-voltage industrial control environments.

The GE DS200VPBLG1AFF is a VME P2 backplane board used in GE LS2100 and Load Commutated Inverter control systems. It provides centralized power and signal distribution across a 13-slot chassis, supporting DSPC, gate distribution, exciter, and I/O extender boards.

The Emerson Fisher-Rosemount KJ4001X1-CA1 is an I/O terminal block used as an interface between field wiring and control system I/O modules. The unit provides 16 numbered terminal positions and is designed for industrial automation installations, including hazardous location environments as indicated on the device label.

Fluke NORMA 6004 portable power analyzer delivers precise four-channel power measurements with 0.1% accuracy and wide 500kHz bandwidth for field and lab use.

Fluke 750PA5 pressure module delivers 0–30 psia absolute measurement with 0.01% reference uncertainty and digital communication for high-accuracy calibration.

Fluke Networks DSX-PLA004-RKIT provides CAT 6A/Class EA plug replacement parts for DSX Permanent Link adapters, restoring accuracy without replacing the full adapter set.

Fluke SOL-TRNG-TS live virtual training teaches PVA-1500 users how to troubleshoot PV arrays, interpret I-V curve deviations, and apply diagnostic strategies.

Fluke PRV240FS provides a safe 240 V AC/DC source to verify FieldSense testers, multimeters, and clamp meters before and after live measurements.

Fluke FLUKEVIEW-2 SCM software streamlines documentation, waveform transfer, analysis, and setup management for ScopeMeter 190 Series III tools.

Fluke Networks SMC-9-SCST launch cable delivers 160m singlemode fiber for accurate OTDR testing, stable network connectivity, and compatibility with OptiFiber units.

The Fluke Networks FI2-7300 is a USB-C FiberInspector Ultra probe that delivers high-resolution end-face imaging and automated IEC pass/fail analysis when used with Versiv. It supports quick inspection of single-fiber connectors in enterprise and data-center fiber systems.

The Fluke Networks FI2-7000-MPO is an MPO-optimized FiberInspector Ultra camera that provides automated analysis of MPO-12/MPO-24 end-faces, fast pass/fail results and high-resolution imaging for data-center and enterprise fiber-inspection workflows.

Allen Bradley 1734-MB provides reliable POINT I/O mounting w/ removable terminal block, DIN rail installation, and secure backplane connection for modular expansion.

Fluke 805 FC Vibration Meter delivers accurate, repeatable machine and bearing health checks with severity-scaled readings and mobile app integration.

Fluke FTK1375 SimpliFiber Pro Kit – Multimode fiber test kit with optical power meter, 850/1300 nm light source, and FiberInspector Mini probe for connector inspection and loss measurement in enterprise and data-center networks.