Search results for: 'process'

The INNO Instrument E-50 Electrodes are replacement consumables designed for use with compatible INNO fusion splicers. Supplied as a matched pair, they generate the controlled electrical arc required for fiber fusion. The E-50 set supports routine maintenance and consistent splicing performance within fiber optic installation and service workflows.

Siemens 771-8STF1 current-to-pneumatic (I/P) transducer converts a DC mA input to a proportional pneumatic output. Configuration: 4–20 mA input, 3–27 psig output, standard output capacity, terminal strip, intrinsically safe approval.

The Fluke 700HTH-1 Hydraulic Test Hose is rated for 10,000 psi (690 bar) working pressure and is designed for use with the Fluke 700HTP-1 hydraulic test pump. Constructed from stainless steel and nylon, it features self-sealing fittings with finger-tight connections. The hose supports connection to both a Fluke pressure module and a calibration unit under test simultaneously and is compatible with water and non-corrosive oil.

The Opto 22 AD6T is a single-channel, optically isolated analog input module designed for 0–5 VDC signals. Built in Opto 22 G1 (Standard) form factor, it provides 12-bit resolution, 4,000 VRMS isolation, and compatibility with Standard analog I/O racks for industrial control systems.

Fluke 80PK-10 pipe clamp temperature probe enables fast, repeatable surface measurements on 1.25–2.5 in pipes using a Type-K thermocouple, ideal for superheat and HVAC diagnostics.

The KAMAN Sensors digiVIT 855949-000 is a self-tuning digital driver for non-contact inductive and eddy current position and displacement sensors. It features pushbutton calibration, embedded intelligence, selectable analog outputs, and Ethernet connectivity for monitoring and parameter switching.

The Edwards Signaling 48XBRMG120A is a green LED visual signal light designed for indoor and outdoor industrial applications. Operating on 120 VAC, this dual-mode beacon supports steady-on or flashing operation and is housed in a corrosion-resistant NEMA 4X enclosure.

The Yamatake Honeywell J-HMM00 is a high-level analog input module designed for Distributed Control System (DCS) architectures. Operating on 24 VDC with 60 mA current consumption, it supports multi-point analog signal acquisition for integration within compatible control systems such as MSC10.

The Phoenix Contact 560-3889 is a power distribution interface module used within Emerson Ovation distributed control systems. It functions as a marshalling and power distribution interface between controllers and I/O field devices, supporting structured wiring through screw terminal connections in PLC and DCS panels.

The Emerson Fisher-Rosemount KJ4001X1-CA1 is an I/O terminal block used as an interface between field wiring and control system I/O modules. The unit provides 16 numbered terminal positions and is designed for industrial automation installations, including hazardous location environments as indicated on the device label.

Fluke 190-104-III-S portable ScopeMeter oscilloscope delivers 100 MHz bandwidth, four isolated channels, and rugged field performance for industrial waveform analysis and troubleshooting.

Fluke 190-204-III is a 4-channel portable ScopeMeter oscilloscope with 200 MHz bandwidth, isolated inputs, WiFi and USB connectivity, built for high-voltage industrial signal troubleshooting.

Fluke 707 Loop Calibrator delivers fast one-handed loop checks with 0.015% mA accuracy, Quick Click control, and simultaneous mA and % display.

Fluke LENS/4XTELE2 4X Telephoto IR Smart Lens magnifies distant targets for safer thermal inspections without recalibration on compatible Fluke cameras.

Fluke 820-2 LED Stroboscope enables non-contact rotational speed diagnostics with high-intensity LED output, quartz accuracy, and sharp stop-motion imaging.

Fluke 700RG08 reference pressure gauge delivers 0.05% accuracy up to 1000 PSIG, with data logging, hazardous area ratings, and rugged field-ready design.

Allen-Bradley 50388 Driver PCB Board provides signal conditioning and drive interface control for compatible Allen-Bradley automation systems, supporting reliable communication between logic modules and field devices.

Yamatake-Honeywell J-DIM00 is a DC 24V digital input module for AMC automation systems, enabling reliable field signal monitoring and seamless integration with compatible industrial and marine control platforms.

Fluke 721-3630 dual-sensor calibrator offers 36 and 3000 psi ranges, 0.025% accuracy, mA measurement, and RTD temperature input for custody transfer applications.

Fluke Networks DSX-PLA004-RKIT provides CAT 6A/Class EA plug replacement parts for DSX Permanent Link adapters, restoring accuracy without replacing the full adapter set.

Fluke FVF-BASIC software enables meter-to-PC data transfer and quick table or graph reports from supported Fluke instruments.

Fluke Networks JR-LEV-1-H replacement blade head supports Leviton 41106, 41108, and 5G108 jacks, enabling fast and accurate JackRapid terminations.