Search results for: 'direct in'

Digi-Pas DWL1300XY 2-axis smart machinist digital level delivers simultaneous X and Y leveling measurement with Bluetooth connectivity, 0° to ±5.00° range, 0.002 in/ft resolution, and precision setup support for machine alignment workflows.

Mitsubishi AL2-EEPROM-2 Memory Cassette delivers reliable EEPROM program storage for Alpha2 PLCs, enabling secure backups, transfers, and long-term data retention.

The Amprobe TIC 300 PRO/KIT: Detects AC voltage up to 122kV with VolTect alerts and self-test. Rugged, safe, and MSHA certified for industrial use.

Eaton DILM12-10 XTCE012B10A XT IEC contactor provides 12A three-pole full-voltage non-reversing control with 110–120 Vac coil, 1 NO contact configuration, and screw terminals.

The PLS 5G is a self-leveling five-point green laser level designed for plumb, level, and square point layout. It delivers ≤1/8 in accuracy at 30 ft (≤3 mm at 10 m) and features a pendulum lock for transport and tilt mode operation. With IP54 protection and a Class 2 green beam (525 nm), the PLS 5G supports interior layout applications up to 100 ft working range.

Fluke 2052 wire tracer kit delivers CAT IV 600 V safe troubleshooting for energized and de-energized circuits with four tracing modes, power flexibility, and precise fault locating.

Quickly locate cables and faults with the Amprobe AF-600. This item features an A-frame design, compass guidance, and automatic gain signal control.

Wöhler VE 400 HD Video Endoscope brings sharp 1280 x 720 inspection imaging to tight cavities through openings from 0.16", with a 5" display, Micro-SD recording, and a 0.22" 0°/90° HD probe for flexible viewing.

The Fluke 87V MAX Digital Multimeter Solar PV Lead Kit combines the IP67-rated 87V MAX True-RMS multimeter with Pomona PVLEAD1 MC4 solar PV connector test leads. Designed for electrical troubleshooting in harsh environments, it supports AC/DC voltage up to 1000 V, 10 A current, resistance, capacitance, frequency, and temperature measurements. The included MC4 to 4 mm leads enable direct voltage verification on photovoltaic arrays while maintaining IEC / EN 61010-031 compliance.

Allen-Bradley 193-EPM1 is an E1 Plus overload relay adapter that enables DIN rail or panel mounting of Bulletin 193-EA and 193-ES electronic overload relays for flexible control panel layouts.

Phoenix Contact 2832771-HW15 FL Switch SF 8TX delivers reliable 8-port industrial Ethernet expansion with 10/100 Mbps speeds and DIN-rail mounting for automation networks.

Fluke 1738/B Advanced 3-Phase Energy Logger captures voltage, current, power, and harmonics with Fluke Connect support for in-depth energy analysis.

Fluke 279FC I/B Thermal Multimeter combines True-RMS measurements with built-in thermal imaging and wireless Fluke Connect for safer troubleshooting.

AEMC 4000D-24 Digital FlexProbe® with a 24” sensor and 6ft lead offers TRMS AC current measurement up to 4000A, compact and easy for tight spaces.

Wöhler Snap & Sweep Regular Chimney Liner Kit delivers fast, modular chimney liner cleaning with snap-connect rods, rotary sweeping capability, and adaptable cleaning media for brick, stainless steel, plastic, and clay flue systems.

AFL Global 8-Channel CWDM Module: High-performance, reliable 1271-1611 nm range with low loss and high isolation. Ideal for CATV, Ethernet, and metro networks.

The Fluke i310s AC/DC current clamp is a Hall Effect-based probe designed for non-intrusive current measurement with oscilloscopes and multimeters. It supports AC and DC current measurement up to 450 A peak, with a frequency range from DC to 20 kHz and dual selectable ranges for measurement flexibility.

Fluke ii915/FPC3 acoustic imager detects gas leaks, partial discharge, and mechanical issues with LeakQ, PDQ, MecQ modes and long-range 120 m detection.

Fluke 1736/EUS logs voltage, current, power, and harmonics with flexible probes, Fluke Connect support, and Class IV safety for reliable three-phase energy analysis.

Arrow Pneumatics EK38 is a 40 micron sintered bronze particulate filter element kit for compatible MidFlow Arrow particulate filters, providing depth filtration and recleanable construction.

AEMC MH60 AC DC Current Probe: Portable 100A current probe with BNC output, 1MHz bandwidth, rechargeable battery, perfect for any oscilloscope.

The Thermo Scientific™ Niton™ XL3t XRF Analyzer is non destructive testing with results in seconds for metal analysis, mining and exploration, and lead paint testing for toys and consumer goods. Is the definitive tool for scrap metal recycling, casting and fabrication, manufacturing QA/QC and positive material identification. Real-time compliance testing, including screening of incoming materials and outgoing finished goods, for the Consumer Product Safety Improvement Act (CPSIA), Proposition 65, Restriction of Hazardous Substances (RoHS) and other regulations. 

The INNO Instrument CJ-11 is a vehicle power cable designed to operate and charge compatible INNO fiber fusion splicers from a standard 12V car cigarette lighter socket. It supports 9V–14V DC vehicle input and is compatible with select View and IFS series splicers and LBT battery packs.

The INNO Instrument LBT-3000-02 is an 11.1V, 3000mAh lithium-ion battery pack designed for the INNO Instrument A3 fusion splicer and compatible M-series models including M7 and M9. Rated at 33.3Wh, it provides portable operating power for field splicing applications and features an integrated LED battery status indicator.