Search results for: 'direction'

FTTH Innovations FIG air blown microfibre installation tool with electronic push force control and cruise control mode for controlled fibre installation in microduct at speeds up to 100 m/min.

Leviton 3433-C locking connector delivers 30A, 120/208V 3ØY grounding connectivity in a 4-pole, 4-wire non-NEMA configuration for industrial cord connection.

The INNO Instrument CJ-11 is a vehicle power cable designed to operate and charge compatible INNO fiber fusion splicers from a standard 12V car cigarette lighter socket. It supports 9V–14V DC vehicle input and is compatible with select View and IFS series splicers and LBT battery packs.

The INNO Instrument LBT-3000-02 is an 11.1V, 3000mAh lithium-ion battery pack designed for the INNO Instrument A3 fusion splicer and compatible M-series models including M7 and M9. Rated at 33.3Wh, it provides portable operating power for field splicing applications and features an integrated LED battery status indicator.

The INNO Instrument LBT-30 is a 9000mAh lithium-ion rechargeable battery pack designed for INNO View series fusion splicers. Rated at 11.1V, it supports extended field operation and is compatible with View 7, 8+, 8 Pro, 8X, 12R, 12R Pro, IFS-10, and VIEW12R MAX models.

The INNO Instrument USB-7P is a proprietary USB Type-C to DC power and data cable designed for use with INNO View 12R and View 12R PRO ribbon fusion splicers. It provides a dedicated interface for DC power delivery and device communication specifically configured for INNO splicer architecture not intended for use with non-INNO devices.

The Fluke 87V MAX Digital Multimeter Solar PV Lead Kit combines the IP67-rated 87V MAX True-RMS multimeter with Pomona PVLEAD1 MC4 solar PV connector test leads. Designed for electrical troubleshooting in harsh environments, it supports AC/DC voltage up to 1000 V, 10 A current, resistance, capacitance, frequency, and temperature measurements. The included MC4 to 4 mm leads enable direct voltage verification on photovoltaic arrays while maintaining IEC / EN 61010-031 compliance.

The PLS 5G is a self-leveling five-point green laser level designed for plumb, level, and square point layout. It delivers ≤1/8 in accuracy at 30 ft (≤3 mm at 10 m) and features a pendulum lock for transport and tilt mode operation. With IP54 protection and a Class 2 green beam (525 nm), the PLS 5G supports interior layout applications up to 100 ft working range.

The Fluke i310s AC/DC current clamp is a Hall Effect-based probe designed for non-intrusive current measurement with oscilloscopes and multimeters. It supports AC and DC current measurement up to 450 A peak, with a frequency range from DC to 20 kHz and dual selectable ranges for measurement flexibility.

Fluke 1738/B Advanced 3-Phase Energy Logger captures voltage, current, power, and harmonics with Fluke Connect support for in-depth energy analysis.

Fluke 279FC I/B Thermal Multimeter combines True-RMS measurements with built-in thermal imaging and wireless Fluke Connect for safer troubleshooting.

Allen-Bradley 193-EPM1 is an E1 Plus overload relay adapter that enables DIN rail or panel mounting of Bulletin 193-EA and 193-ES electronic overload relays for flexible control panel layouts.

Fluke ii915/FPC3 acoustic imager detects gas leaks, partial discharge, and mechanical issues with LeakQ, PDQ, MecQ modes and long-range 120 m detection.

Fluke 2052 wire tracer kit delivers CAT IV 600 V safe troubleshooting for energized and de-energized circuits with four tracing modes, power flexibility, and precise fault locating.

Fluke 1736/EUS logs voltage, current, power, and harmonics with flexible probes, Fluke Connect support, and Class IV safety for reliable three-phase energy analysis.

Mitsubishi AL2-EEPROM-2 Memory Cassette delivers reliable EEPROM program storage for Alpha2 PLCs, enabling secure backups, transfers, and long-term data retention.

The Amprobe TIC 300 PRO/KIT: Detects AC voltage up to 122kV with VolTect alerts and self-test. Rugged, safe, and MSHA certified for industrial use.

AEMC MH60 AC DC Current Probe: Portable 100A current probe with BNC output, 1MHz bandwidth, rechargeable battery, perfect for any oscilloscope.

AEMC 4000D-24 Digital FlexProbe® with a 24” sensor and 6ft lead offers TRMS AC current measurement up to 4000A, compact and easy for tight spaces.

Wöhler Snap & Sweep Regular Chimney Liner Kit delivers fast, modular chimney liner cleaning with snap-connect rods, rotary sweeping capability, and adaptable cleaning media for brick, stainless steel, plastic, and clay flue systems.

Wöhler VE 400 HD Video Endoscope brings sharp 1280 x 720 inspection imaging to tight cavities through openings from 0.16", with a 5" display, Micro-SD recording, and a 0.22" 0°/90° HD probe for flexible viewing.

Sauermann SICA 2304NLSL delivers combustion gas analysis with O2, CO, Low NO, and Low SO2 measurement for residential, commercial, and industrial emissions testing workflows.