Search results for: 'instapv'

Pasthrough holes for excess wire and EASY sorting 3 prong, 50µ gold contacts - the best! Works on solid and stranded wire

Cuts on one end, other does not Works on 110 style blocks Fits in most industry standard handles Twist and lock style blade

INNO Instrument SBT300 battery internal resistance tester for measuring battery resistance and voltage up to 300V. Includes BZ-1001 zero setting panel, BL-1001 pin test line, BL-1002 clip test line, and installed LAN/RS-232C, analog output, and EXT I/O interfaces.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

The Siemens B220 2-Pole breaker delivers reliable 20A thermal-magnetic protection for 120/240V systems, ideal for Siemens P1 panelboards and BL-series load centers.

Fluke Networks D914S impact tool delivers precision terminations with torque control, built-in hook and spudger, and ergonomic soft-touch handle.

The Hydrajaws Wall Tie Tester Kit MK2 is used for testing all types of remedial wall tie. Trusted by market-leading companies, the Wall Tie Tester Kit is an essential tool for carrying out testing procedures in line with BRE Digest 401. Manufactured to exacting high standards, the Hydrajaws Wall Tie Tester Kit contains a small bolt tester adaptor and two threaded rod adaptors (M5 and M6) to test up to a maximum tensile load of 10kN. The three-legged load spreading bridge keeps reaction loads away from the fixing allowing results to be more consistent.

Measure temperature (F or C), relative humidity, and dew point before, during, and after your flooring installation and woodworking applications.

ABB Steel City 72171 is a 4-11/16 in square steel electrical box with a 2-1/8 in depth and 42 cu in capacity. Constructed from pre-galvanized steel, it features eccentric knockouts for 1/2 in and 3/4 in conduit and is designed for commercial conduit wiring installations.

Fluke Networks MS2-IDK27 Remote Identifier Kit adds numbered identifiers 2–7 for faster outlet testing with MicroScanner2 cable testers.

Fluke Networks MS-POE-WM wiremap adapter enables accurate twisted pair fault detection when used with the MicroScanner PoE mainframe.

Fluke D814 Punchdown Tool: Durable telecom impact tool with adjustable spring, blade storage, and precise low/high impact wire termination.

Compression tool for waterproof connectors Compatible with F, BNC, RCA connectors on RG-58, RG-59, and RG-6 coaxial cables Adjustable length for compression connectors: 14.7-47.7mm Used in CATV, HDTV, satellite system, and component video applications Carbon steel body with nylon handle Overall length: 4.7 in.

Hex Crimp For RG6Q Cable 10 Connectors

Cooper Bussmann MV055F1DAX100E is a 5.5kV full-range medium voltage fuse rated at 100A with 50 kA RMS symmetrical interrupting capacity for feeder circuit, switchgear, and transformer protection.

The Emerson DeltaV KL4502X1-BA1 (12P4990) is a CHARM standard terminal block designed for use with the DeltaV S-series Electronic Marshalling system. It provides the physical interface for field wiring and supports installation of CHARM (Characterization Module) components within DeltaV control architectures.

Vast 5YB97 1.5" steel conduit strap clamp delivers secure mounting for EMT, IMC, RMC, and flexible conduit with durable electro-galvanized construction.

Appleton ST-4575 45° Liquidtight Connector delivers a secure, corrosion-resistant seal for 3/4" LFMC, ideal for wet or harsh industrial installations.

Eaton MOD-ALG240 LED indicator module shows energized relay status for D3/D5/D7 series relays, offering clear visual monitoring and simple plug-in installation.

AEMC C.A 6117 Installation Tester: Precision testing with RCDs, loop, insulation, harmonics, B-type RCDs & voltage drop feature plus DataView® software.

AEMC C177A AC Current Probe: 5mA–200A range, 10,000:1 ratio, 6.5ft CA connector lead—designed for CA6116N & CA6117 installation testers.

The EXFO Soft Pulse Suppressor Bag eliminates OTDR dead zones, ensuring accurate fiber optic testing. Compact and reliable, it’s ideal for precise measurements during installation and troubleshooting.