Search results for: 'owned'

Phoenix Contact QUINT-DIODE/12-24DC/2X20/1X40 is a DIN-rail mounted redundancy diode module for 12–24 V DC systems. It decouples parallel power supplies to increase system availability, supporting 2×20 A redundancy or 1×40 A increasing power operation.

Phoenix Contact RAD-IN-8D is an 8-channel digital input extension module for the Radioline system. It accepts 5–30 V AC/DC signals, mounts on a 35 mm DIN rail, and connects via a bus foot connector for modular industrial automation signal acquisition.

Moore Industries DPS 240 DIN-style power supply configured for 42 VDC output at 240 mA from a 117 VAC input. Linear regulated design with adjustable voltage, current limiting, and isolated output for powering 2-wire transmitters and instrumentation circuits.

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

The GE Fanuc Genius IC660BBA106 is a current-source analog input block with six input channels designed for the Genius I/O system. It operates on 115 VAC or 125 VDC and supports 4–20 mA current inputs for industrial analog signal acquisition.

The General Electric CR305X100E is a side-mounted auxiliary contact adder block providing one normally closed (1 NC) contact for GE 200- and 300-Line starters and contactors. It is designed for field installation onto a basic auxiliary contact block and is rated up to 600 VAC and 250 VDC.

Toshiba VF-S11-4015PL-WN industrial inverter delivers precise speed control for 3-phase induction motors, supporting 1.5kW operation on 380–500V systems with compact panel-mount design and flexible control modes.

General Electric 36A352951 AC-A circuit board with tag 356X479TAG01, designed for industrial control systems requiring analog AC signal processing within GE automation and power control platforms.

Toshiba VFS11-4015PL-WN VF-S11 inverter delivers precise three-phase motor speed control with vector performance, built-in EMI filtering, and RS485 Modbus communication for industrial automation systems.

Siemens 4700-DC3-11HN digital power meter providing true-RMS voltage, current, power, energy, demand, waveform capture, programmable relays, and analog output for industrial power monitoring systems 

Alstom ESA-700 UV flame signal analyzer for Limelight Exacta systems, providing fast flame failure detection and reliable burner monitoring in large combustion equipment using 21.6–26V AC input power.

Allen-Bradley S50411-002 dynamic brake board enables controlled motor deceleration by managing regenerative energy through external brake resistors in compatible 1305 variable frequency drives.

Allen-Bradley 100S-C72DJ14C safety contactor delivers 72A IEC switching with mechanically linked contacts and a 24V DC diode-suppressed coil, providing reliable feedback for safety-related control circuits.

Toshiba VFS15-4015PL-W VF-S15 variable frequency drive delivers precise 3-phase motor speed control up to 1.5 kW. Designed for compact industrial installations requiring reliable torque control and energy efficiency.

Allen-Bradley 1746-A7 SLC 500 7-slot modular chassis supporting 1746 processors, I/O, and specialty modules. Designed for scalable PLC systems with side-mounted 1746 power supplies.

General Electric 193X532ABG04 field service control module for control/repair replacement use in compatible GE industrial systems. Identified by model number for accurate part matching.

Allen-Bradley 100-C12D10 contactor with 193-EA1DB E1 Plus overload relay provides IEC motor switching with electronic overload and phase-loss protection for reliable industrial motor control.

Allen-Bradley 1492-CB1 H030 is a 3A, 1-pole DIN rail supplementary circuit breaker designed for control circuit protection, featuring an H-trip curve for highly inductive loads and compact panel integration.

Allen-Bradley 1492-CB2 H 200 is a 2-pole DIN-rail supplementary circuit breaker designed for industrial control panels, providing reliable thermal-magnetic overcurrent protection with an H-curve trip characteristic.

Ronken 86A79505K81 delivers reliable 5 μF, 700 Vp high-voltage film capacitance for industrial filtering and SCR power applications, ideal for replacing obsolete units.

Phoenix Contact 2832771-HW16 FL Switch SF 8TX delivers reliable 8-port 10/100 Mbps industrial Ethernet expansion with plug-and-play setup and DIN-rail mounting.

The Rigaku KT-100 is a handheld LIBS analyzer designed for rapid alloy identification and elemental analysis of industrial metals. This configuration includes permanent, transferable calibration matrices covering stainless steels, low alloy steels, aluminum grades, titanium, cobalt, nickel, and copper.

Calibrate your Teledyne Model 560 Series opacity and dust monitors with the reliable 1860-1250-01 Calibration Kit. Ensure accurate emissions readings every time!