Search results for: 'sporttik'

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

The INNO Instrument View Mini 2 OTDR (MINI2-SMF2) is a handheld optical time domain reflectometer designed for fiber optic maintenance and live network testing. This configuration includes a 1625nm filtered live port with a 30dB dynamic range for in-service fiber analysis without service interruption.

Allen-Bradley 1794-TB3 FLEX I/O terminal base provides 16 I/O wiring points with screw-clamp connections, integrated FLEXBUS backplane support, and DIN-rail mounting for FLEX I/O systems.

Allen-Bradley 1734-MB 95723404 Series A mounting base delivers secure DIN-rail installation for POINT I/O modules, with keying and POINTBus connections for reliable setup.

Hubbell HBL26420 Hubbellock industrial receptacle rated 60A 600V AC, 3-pole 4-wire grounding, screw terminals, cast aluminum long housing.

Fluke Networks Cable Analyzer DSX2-8000QI-NW – Advanced copper and fiber certifier supporting Cat 8 to 2000 MHz with Level 2G accuracy. Includes Quad OLTS for Tier-1 multimode/singlemode fiber certification. Non-wireless version of the DSX2-8000QI.

SICK 2013-510 deuterium lamp light source assembly supports replacement and service workflows where a SICK deuterium lamp source is required.

Fluke Networks SN-EXTD Tip Kit includes a Series 2 extended guide and tip designed for accurate inspection of female SN connectors.

Fluke Networks ADAP-PTNX-KIT: Complete Ethernet accessory kit with adapters and Dial Tone Detective for voice, data, and video cable testing.

Elcometer 331 TH Concrete Covermeter supports rebar location, orientation, cover depth measurement, bar sizing, half-cell potential measurement, linear/grid data logging, and short borehole probe checks in reinforced concrete.

Philips Advance ICN-2P32-N Centium ballast delivers quiet, energy-efficient instant start operation for 1 or 2 F32T8 lamps in 120–277V commercial fixtures.

Siemens 5SY4108-7 delivers reliable 8A Type C circuit protection for DIN-rail systems, ideal for control and lighting circuits needing dependable overload and short-circuit performance.

Banner RWB4 MAXI-BEAM wiring base provides a rugged 4-terminal foundation for mounting MAXI-BEAM sensor heads and power blocks, ensuring easy modular integration.

Hubbell 0740-113-33 delivers straight liquidtight cord-grip strain relief for insulated cables, combining stainless steel mesh, nylon body construction, and a neoprene bushing for dependable cable management.

Square D FAL34050 delivers 50A, 3-pole thermal-magnetic circuit protection for 480V electrical systems with unit-mount installation and line/load lug connections.

Square D 83713 9070EO2D1 delivers open-type control circuit transformer operation with multi-tap primary input, 110/115/120 V secondary output, and 50/60 Hz ratings for industrial control panels.

Westinghouse 9966D75G01 IQ Data Plus II power monitoring display delivers three-phase electrical measurement including amps, volts, watts, power factor, and energy data for digital metering systems.

Westinghouse Ovation 1C31179G02 Remote I/O MAU module for distributed control system remote I/O communication and field device integration.

INNO Instrument PAL-1003 external sensor connection cable with BNC connector for connecting external CT or VT sensors to compatible INNO Instrument SPA series power analyzers.

The INNO Instrument JS-180300 is a 19V AC adapter and battery charger designed for INNO View series fusion splicers and compatible instruments. It provides 19V DC output at 3.42A with universal 100–240V AC input, supporting global mains standards. Desktop-style construction with attached DC output cable.

The Inno Instrument USB-6P is a Mini USB (male) to USB Type-A (female) adapter cable designed for use with INNO M Series fusion splicers. It enables connection of compatible USB accessories such as inspection probes or USB storage devices for data transfer and software updates.

Fluke Networks CFM-TRC-S-MPO12P CertiFiber Max test reference cord set supports accurate optical loss testing of single-mode MPO12 unpinned fiber when used with CertiFiber Max OLTS.

The Kepco RA60 is a 19-inch rack-mount mainframe designed to house up to three Kepco HSP Series DC power supply modules. This configuration includes HSP 24-60MR and HSP 24-60R modules, supporting parallel operation, hot-swap capability, and high-current 24 VDC power distribution.